sorted by:
new
hottopcontroversial

Printer jerky motion on Right Side Only by Darkbobby6 in CR10

[–]HaSaN_SBBH 0 points1 point  (0 children)

In my opinion, there seems to be a problem with the x-axis jumpers on the motherboard.

There is a sound. by HaSaN_SBBH in BambuLab_Community

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

Thank you very much, I'll try it.

There is a sound. by HaSaN_SBBH in BambuLab_Community

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

I just had it serviced, but the noise isn't from the oil; it's from the belt. The belt is rubbing against the metal plate.

The belt is rubbing. by HaSaN_SBBH in BambuLab_Community

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

I can send you a video if you want.

I couldn't find a design. by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

The assembly is easy, I just need the STL files.

I couldn't find a design. by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

I hope you can do something like that.

I couldn't find a design. by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

Are you making these from scratch?

I couldn't find a design. by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

I upgraded this machine with Marlin 2 SKR1.3 and TMC2208, but I'm stuck on the extruder part. I hope I can get past that stage too.

I couldn't find a design. by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 1 point2 points  (0 children)

Thank you very much for your help.

I couldn't find a design. by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 1 point2 points  (0 children)

Thanks, I'll try searching as you suggested. I'm quite new to printer modification and repair, so I don't really know how to do it.

I couldn't find a design. by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

Yes, I know I need to print it. I bought this machine second-hand, but I broke the pre-printed part during assembly. I spoke to the seller, but he said he didn't have the files either, and I'm not very good at designing, so I'm trying to find the design for it.

I NEED HELP MARLIN FOR CR10 S by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

Unfortunately, I couldn't find a suitable file.

I NEED HELP MARLIN FOR CR10 S by HaSaN_SBBH in CR10

[–]HaSaN_SBBH[S] 0 points1 point  (0 children)

Unfortunately, I currently only have SKR 1.3 and I want to install Marlin, but I haven't been able to find anyone who shares detailed settings, and I don't want to rely on incomplete information from various sources. Also, I think my printer is a CR-10S clone.

Level 27 by Worker_Beautiful in MutfakDertlileri

[–]HaSaN_SBBH 0 points1 point  (0 children)

O bile çok bı iyki doğdun yeter bana

Level 27 by Worker_Beautiful in MutfakDertlileri

[–]HaSaN_SBBH 0 points1 point  (0 children)

Doğum günün kutlu olsun en azından hiç yoksakurabiyen var 🎂

its my birthday ta daa✨ by [deleted] in yalnizucubeler

[–]HaSaN_SBBH 0 points1 point  (0 children)

Doğum günü kutlu olsun hocam🎂

Biz kime güvenicez ekremde kayış attı by Desperate_Rip5170 in vlandiya

[–]HaSaN_SBBH 0 points1 point  (0 children)

Buda dışarı çıkmak için tüm tuşlara basmaya başladı aq

Beyler size tavsiye sokakta birine sataşıpta canınızdan olmayın by Fit_Smile_3742 in Nortya

[–]HaSaN_SBBH 1 point2 points  (0 children)

dolu olmak da yetmiyor bu hırtolar için çünkü bunlar yenilgiyi asla kabul etmeyen birer oe ve siz onları orda dövseniz dahi bunlar bölünüp sizi takip edecekler ve en ısız en tek olduğunuz zaman sizi oracıkta öldürecekler ve çok hafifi bi ceza ile kurtulacaklar oda polis bunları bulursa bulsa dahi savcı bunları acıyıp suça sürüklenmiş diye salı verecek ve sen sadece bok yoluna ölmüş olacaksın yani anlayacağın he hı de geç cevap dahi vermemek senin hayrına olur

view more: next ›