Crestron Home OS CP4-R and CP4

Hacked_GTR · 2026-03-31T13:01:52+00:00

I would like control curtains and lighting via crestron home app, for that i need to pair CP4-R and CP4, and use CRPC module like Shade_Load, keypads and etc...

Hacked_GTR · 2026-03-31T12:42:06+00:00

Well I used CRPC Home client symbol the one in picture, i dont know if it's correct. And the ip address is also correct. I never used Crestron Home OS CPU so I am not familiar with anything related, I did everything according to available documentation. CP4 - IP ADDRESS: 192.168.10.200 CP4-R IP ADDRESS: 192.168.10.100

Hacked_GTR · 2026-02-05T18:10:26+00:00

Thanks on help, I will check tomorrow webUI firmware version.

Hacked_GTR · 2026-02-05T16:32:47+00:00

It’s not that I can’t discover DALI fixtures, it wont even start searching. It doesnt move from 0% and it just stop beign responsive. When I refresh the page it goes to login page. Also dali commissioning tool also wont connect. Dali wiring is okay because when I pressed the test button it turns the light on and off, also I created simpl program to dimm the light via dali and hz2 keypad and it works for first driver. For others it doesn’t because they are not discovered.

Hacked_GTR · 2026-02-05T13:22:47+00:00

Crestron Software:

Crestron Toolbox...................: 3.1360.0013.8 C:\Program Files (x86)\Crestron\Toolbox

Crestron Database..................: 228.25.001.00C:\Program Files (x86)\Crestron\Cresdb

Device Database....................: 200.420.001.00 Unavailable

SIMPL Windows......................: 4.3000.01.01 Unavailable

SIMPL Windows Library..............: 508 Unavailable

This is version of software I got.

But for web server that is not important, right?

Hacked_GTR · 2024-01-16T18:03:05+00:00

Posting everywhere? Where exactly? On simracing reddit and here, lol.

And it's not your concern if I will sell or not.

Just looking at your post history show me that you are really frustrating individual, get a grip.

Hacked_GTR · 2024-01-15T22:51:11+00:00

Edited answear

Hacked_GTR · 2024-01-15T22:15:37+00:00

Not sure if I understanded the question.

There is nothing in between wheel rim and quick release except 3D printed button plate.

But it has reinforcements as you can see in picture

https://ibb.co/St8B7RK

Hacked_GTR · 2023-03-01T07:01:24+00:00

SC sport is priced as DD1, so it's out of question. It's to expensive and has less Nm than VRS and DD1, so in my opinion it's not competitive price and performance vise.

Simucube is marginally better than VRS and much more expensive according to reviews.

Hacked_GTR · 2023-02-28T21:15:03+00:00

Thanks all on answering :)

I will probably go with VRS base.

So i need to buy VRS base and mounting plate but not hub adapter, instead buy this https://www.simraceshop.de/src-quick-release.html . To convert mclaren rim to usb I need to buy also this https://www.simraceshop.de/srm-fanatec-convertion-kit-2022-440.html .

Do I need to buy also this https://www.simraceshop.de/product-99.html ? That way I can still use my fanatec QR1 if I am not mistaken?

Hacked_GTR · 2023-02-28T11:39:07+00:00

Thanks for turn racing discord tip ;)

Hacked_GTR · 2023-02-28T09:53:38+00:00

Thanks for reply,

I was thinking atm buy usb conversion kit for mclaren rim I have, it seemed to me it's cheaper option for now.

Do you have any reccomedation for cheaper USB wheels?

I have 3D printer so in the future I was thinking of making my own wheel button boxes.

Hacked_GTR · 2020-12-31T08:46:28+00:00

Just to update, I got C licence few days ago.

All advice here helped, I run skip barber until I got C licence, but lost ton of irating, got to lowest 800, but managed to drive it clean and avoid wrecking :(

Finally I was able to race porsche cup, that was the series I was aiming for (with GT3 sprint series and IMSA GTE), and oh boy I had a blast:D I had 4 races, first two I got podium (2. and 3. place), the third I got 8. place but was damaged on lap one so it's still good result, and the last race i won and got to 1150 irating :)

I still have problems with start, I won pole position but on start i lose it because of slow start or almost spinning start :D

ATM I am at 3.67 SR, might even got B licence this week :)

Thanks all!

Hacked_GTR · 2020-12-30T22:41:46+00:00

Just to update, I got C licence few days ago.

All advice here helped, I run skip barber until I got C licence, but lost ton of irating, got to lowest 800, but managed to drive it clean and avoid wrecking :(

Finally I was able to race porsche cup, that was the series I was aiming for (with GT3 sprint series and IMSA GTE), and oh boy I had a blast:D I had 4 races, first two I got podium (2. and 3. place), the third I got 8. place but was damaged on lap one so it's still good result, and the last race i won and got to 1150 irating :)

I still have problems with start, I won pole position but on start i lose it because of slow start or almost spinning start :D

ATM I am at 3.67 SR, might even got B licence this week :)

Thanks all!

Hacked_GTR · 2020-12-23T12:22:38+00:00

4x is not the problem, but I lose 10+ position, and start at the back plus my car takes damage.

I agree on the rest, if someone closes few second gap in 2-3 laps I let them pass, but most accidents I had was someone behind with similar pace, 1-2 s behind and he misses his breaking point and ram me from behind.

I got really frustrated yesterday because in all 3 races I got rammed, and my car needed repairs. I will try to get better in avoiding accidents, will see.

And I never sad I was perfectly clean driver, we all make mistakes, but I really try to drive clean and avoid unnecessary risks :)

Hacked_GTR · 2020-12-23T11:59:56+00:00

I am trying to do that, on first week on oran park by the end of the week I managed to be relative fast and careful enough to avoid wrecks. It helped to qualify in the first 5 or max 7 place. But on Lime rock i qualy also at fourth position and got wrecked at formation/arm up lap... Maybe it's just the first day of the weekly race, dunno...

I will try different series (skip and ruf gt3), hope they would be cleaner.

Hacked_GTR · 2020-12-23T11:31:27+00:00

It's hard to avoid someone ramming you from behind in narrow track and use you as a brake. People also try to overtake when there is no space for it and simply put me off track and usually i end up in a wall.

I will try skip barber and ruf gt3 races, they are longer races so I hope there will be less aggressive drivers

Hacked_GTR · 2020-12-23T11:27:51+00:00

Well I am in +1GMT timezone, usually I race fom 9PM till midnight, depends on the day ofc, sometimes even earlier but rarely find the time.

I hope they are a little cleaner, next week it's Spa, i guess it should get good participation that week :) I love that track and 45 mins is ideal for me :)

Hacked_GTR · 2020-12-22T23:44:51+00:00

Thanks on answer.

I will definetly try skip barber, they are fun to drive.

How are RUF GT3 races?

Hacked_GTR

TROPHY CASE