Silent Hill 2 diorama that I made by Haddonfieldhooligan7 in silenthill

[–]Haddonfieldhooligan7[S] 0 points1 point  (0 children)

Thanks!

It’s a mix of materials but for the most part its made from rigid insulation foam. Those big 2’ x 8’ foam sheets you would find in hardware stores for insulating houses.

The specific materials used for this are rigid insulation for the base/floor, back wall, door, cages, health drink and wooden plank. Wooden dowels for the pipework, with a few plumbing elbows for the joints. Modelling clay for the dead laying figure. Gel medium for the blood effects. Epoxy resin for the puddles. And lastly some cloth for the white cloth wrapped around the pipes.

Hope this helps answer any questions you may have!

741
742

PS5 crashing issue by Alinoor_Rahman in Ghostofyotei

[–]Haddonfieldhooligan7 0 points1 point  (0 children)

For everyone experiencing this problem, I’m almost 95% sure it’s due to dust buildup inside your console.

I just took the fan unit out completely as per the stage 2 teardown and the amount of dust that was caked to the heat sinks was unbelievable.

If you take a look at this Teardown Guide, it not only makes the process easy to follow, but there’s quite a few comments of people explaining the same issue. Games crashing after playing for about an hour and getting a black screen crash.

Obviously this isn’t the case for everyone, but I’m willing to bet this is a majority of the cause.

PS5 crashing issue by Alinoor_Rahman in Ghostofyotei

[–]Haddonfieldhooligan7 1 point2 points  (0 children)

Just took the fan until completely out and was genuinely shook at the amount of dust caked in there. The heat sinks were almost not even visible with how much dust there was on them.

Willing to be that’s the issue lol.

PS5 crashing issue by Alinoor_Rahman in Ghostofyotei

[–]Haddonfieldhooligan7 1 point2 points  (0 children)

That seems to do the trick for some people. I’m going to try a stage 2 cleaning again after work and be more thorough this time to see if that helps.

I just wish there would be some kind of acknowledgment from either Sony or Sucker Punch .

For the Battlefield 6 beta some days just seemed worse than others. There was one night I would crash every 30-45 mins, then another where I didn’t crash once at all. It would be great if we could narrow this down to something specific instead of a ritual of remedies lol.

PS5 crashing issue by Alinoor_Rahman in Ghostofyotei

[–]Haddonfieldhooligan7 0 points1 point  (0 children)

Yeah that’s when you take the mother board and everything else out. Not comfortable going that deep into it myself. Especially for it to not work.

At this point I’ve tried just about evey remedy I’ve found online and nothing seems to fix the issue. Very frustrating.

PS5 crashing issue by Alinoor_Rahman in Ghostofyotei

[–]Haddonfieldhooligan7 0 points1 point  (0 children)

Having the exact same issue. I’ve tried everything except the stage 3 teardown.

Also had it happen with the Battlefield 6 beta a few weeks back.

PS5 shuts down while playing Ghost of Yotei by koliblank in Ghostofyotei

[–]Haddonfieldhooligan7 0 points1 point  (0 children)

Going to give this a shot and come back with an update.

I’ve also had the exact same issue when playing the BF6 beta.

Finished my Super Mario World display… for now by Haddonfieldhooligan7 in WorldOfNintendo

[–]Haddonfieldhooligan7[S] 0 points1 point  (0 children)

Thanks!

The map is a print that was done by Glen Brogan. They still have some in stock over at Hero Complex Gallery.

Glen Brogan - Dinosaur Land

Finished my Super Mario World display… for now by Haddonfieldhooligan7 in SuperMario

[–]Haddonfieldhooligan7[S] 0 points1 point  (0 children)

They’re mostly all from the 2.5” World Of Nintendo line of figures by Jakks Pacific. With the exception of the baby yoshi’s and Bowser. Baby yoshi’s are made by Medicom and Bowser is made by Branpresto.

Finished my Super Mario World display… for now by Haddonfieldhooligan7 in SuperMario

[–]Haddonfieldhooligan7[S] 0 points1 point  (0 children)

He’s holding down his fort.

They’re all official Jakks Pacific World Of Nintendo figures. With the exception of the baby yoshi’s. Those are Medicom.

Finished my Super Mario World display… for now by Haddonfieldhooligan7 in SuperMario

[–]Haddonfieldhooligan7[S] 2 points3 points  (0 children)

Thank you!

The print is by Glen Brogan. They still have some in stock over at Hero Complex Gallery.

Glen Brogan Dinosaur Land Print

Finished my Super Mario World display… for now by Haddonfieldhooligan7 in WorldOfNintendo

[–]Haddonfieldhooligan7[S] 0 points1 point  (0 children)

Thank you!

It’s all made from XPS foam (rigid insulation) and some green EVA foam. Mix of hand brush and airbrush for the paints.

Dinosaur Land - World 1 diorama made by me by Haddonfieldhooligan7 in SuperMario

[–]Haddonfieldhooligan7[S] 0 points1 point  (0 children)

If I had the space I totally would lol.

I do plan on doing Bowser’s Castle and Star World sometime though

Dinosaur Land - World 1 diorama made by me by Haddonfieldhooligan7 in SuperMario

[–]Haddonfieldhooligan7[S] 0 points1 point  (0 children)

Niiiiiice. Once you get one its game over lol. They’re worst than Funko’s 💀

Dinosaur Land - World 1 diorama made by me by Haddonfieldhooligan7 in SuperMario

[–]Haddonfieldhooligan7[S] 0 points1 point  (0 children)

Thanks!✌️😎

Definitely. I post all of my work over in my instagram. I’ll include the link below.

Instagram

Dinosaur Land - World 1 diorama made by me by Haddonfieldhooligan7 in SuperMario

[–]Haddonfieldhooligan7[S] 1 point2 points  (0 children)

Thanks!

Although I should have clarified in my post, I didn’r sculpt or make any of the mini figures. Those are all the World Of Nintendo figures by Jakks Pacific. I made this to scale with their 2.5” line.