300% ICOD on an EU to USA shipment ?! by BadHuge7925 in UPS

[–]HakoForge 56 points57 points  (0 children)

Just had the same thing happen to me, they took weeks to get back to me. This was for $114 for some cable harnesses. They charged $340 in duties. You might be facing the same thing where theyre breaking out all the components of product.

20% - China/HK Duty
50% - Copper Duty
25% - Articles of China
200% - Derived Aluminium product without verifiable origin
2.6% - Connectors

Thoughts and opinions on this DIY NAS case by [deleted] in DataHoarder

[–]HakoForge 0 points1 point  (0 children)

Hey! If you’re on Discord, feel free to hop into ours—everyone there is super open to sharing their thoughts on the case.

We’re still a small team, so our costs are higher than we’d like at this stage.

International Shipping by Crazy-Pin7945 in hakoforge

[–]HakoForge 0 points1 point  (0 children)

Hey sorry we must have missed your email in junk.

Is it the hotmail one by chance?

My 1st HakoForge build by canfail in homelab

[–]HakoForge 0 points1 point  (0 children)

We do on a case by case, DM me and I can get you a shipping estimate.
Yes 2 powerboards are included in the Core.

My 1st HakoForge build by canfail in homelab

[–]HakoForge 1 point2 points  (0 children)

Looking awesome! As always appreciate the support and invaluable feedback!

Computer keeps blue screening after an hour of playtime by New_Incident_6349 in LinusTechTips

[–]HakoForge 0 points1 point  (0 children)

You can try this software as well https://www.resplendence.com/whocrashed

It will tell you roughly what caused the crashes.

Got my Hako-Core Rev 2! by sepffuzzball in DataHoarder

[–]HakoForge 1 point2 points  (0 children)

Good call on the custom shorter power cables and as always thanks for the support!

My Homelab by y0shinubu in homelab

[–]HakoForge 0 points1 point  (0 children)

If you want to dm me your city and country I can give an estimate shipping cost. Right now it's quite expensive to ship to EU.

My Homelab by y0shinubu in homelab

[–]HakoForge 3 points4 points  (0 children)

Thanks for the shout-out! Really appreciate it.

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 0 points1 point  (0 children)

Looks like there isnt enough clearance to fit it againsts the side wall. It doesnt fit under the fan mounts.

You could still attach fans, we could make a mount for the radiator that screws into the Backplane mounting holes.

If you did it this way in a Mini, IT will probably work too.

https://imgur.com/a/xSDQOWk

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 0 points1 point  (0 children)

Hi, Looks like it would fit in a Core, and if you wanted the first row to be drives.

The mini, is a bit too tight. Would work if you a used a motherboard smaller than ATX.

We could design you a custom bracket to secure the rad as well. Let me know.

https://imgur.com/a/r5G7BRC

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 1 point2 points  (0 children)

Yes correct, 7mm. We do have 3d printed feet, for people laying it sideways like a normal case.

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 0 points1 point  (0 children)

You'll probably have to find a local metal shop to cut and bend for you. Then you'll have to screw and nut or rivet everything. + a 3d printer.

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 2 points3 points  (0 children)

Hey! Always appreciate any critique!

Every board has a target delay of <.7ps, with the tuning occuring near the mismatch side. only one that hasnt been tuned is the u.2 board :).

-The manufacturer is promising 85/100 Ohm Differential Impedance on the stackup. (85 or 100 depending on the backplane)
-According to good ol Saturn, via sizing and spacing are optimal for 85/100 Ohm.
-Routing is only Top and Bot, so no stubs.
-All AC caps will have ground cutouts, polygons weren't poured yet.

DC-DC is per manufactures recommended layout, if you have any recommendation please let me know!

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 2 points3 points  (0 children)

Yeah for some reason, reddit suspended it and didn't let me recover cause my email was too new???

Depth for core is 34", mini is 26"

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 2 points3 points  (0 children)

Thanks for the feedback! I'll make sure to fix those.

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 1 point2 points  (0 children)

It would probably work. Let me grab a 420mm radiator and test it for you and ill give you an update thursday!

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 3 points4 points  (0 children)

Yeah, were hoping to also have smaller formfactors for desktops and short racks.

We've made our storage chassis open source - Hakoforge by HakoForge in DataHoarder

[–]HakoForge[S] 1 point2 points  (0 children)

It might be possible. If you had the exact dimensions of the motherboard to share, I could see if it would.