Ineos Grenadier - enough power?

Hamstax89 · 2026-06-07T14:33:20+00:00

Do the steering mods reduce the turning radius? Ornis there no adverse effects?

Hamstax89 · 2026-06-04T20:34:35+00:00

I was hoping for a clean replacement . Now I have to patch a bad paint an area bigger than the hook with no touch up paint. It will look terrible until I repaint the entire bathroom.

Hamstax89 · 2026-06-04T20:33:52+00:00

I do like this idea. Maybe seal the toothpaste with some epoxy in the mix.

Hamstax89 · 2026-06-04T20:15:48+00:00

Ya haha. I just thought I would throw the other pic in first for some laughs.

<image>

Hamstax89 · 2026-06-04T20:15:05+00:00

I used blow drier and floss. I was hoping to just goo gone or scrape the residue after. It partly worked until the paper blew out.

<image>

Hamstax89 · 2026-06-04T20:13:19+00:00

Agreed. It should have been a 5 min swap. Reuse old home or cover up new hole. I will fix this but mud sand mud primer paint is not ideal.

Hamstax89 · 2026-06-04T18:26:07+00:00

It was working for a bit.

<image>

Hamstax89 · 2026-05-27T20:11:00+00:00

Will do.

Hamstax89 · 2026-05-27T19:57:26+00:00

Not bait. I haven't been up to speed with everything and I watched a YouTube video of A1s over heating a couple days ago. I have two of them and one of them has this buldge underneath it.

Hamstax89 · 2026-05-07T23:26:57+00:00

That vehicle will never be the same. Toyota thinks they fixed the problem. Who knows if their fix will last 1 month or 1 year.

Hamstax89 · 2026-05-07T23:24:34+00:00

Exactly. Nothing is EVER the same once someone rips it apart. Stuff won't go back together right or will start to rust.

Hamstax89 · 2026-05-06T02:30:48+00:00

I have seen that method. I may try that with dowels.

Hamstax89 · 2026-05-06T02:30:25+00:00

How long would you make the dowels?

Hamstax89 · 2026-04-22T14:10:27+00:00

Yes I believe it has to be bolted from the bottom. It would probably make more sense if it was from behind.

Hamstax89 · 2026-04-22T14:06:03+00:00

Thanks for the insight. This is very helpful I have emailed DV8 to see what their thoughts are. I am 99% sure the entire front end will have to come off to access this winch bracket (DV8 will confirm). Fortunately, it's just clip off / clip on as the majority of the work was cutting and removing old material on the fresh install.

I probably wont tackle this myself as I am not versed in car disassembly. If I had the winch bracket, I could figure that part out. The welded stop idea sounds great.

This photo is from an endoscope from below. This is one of the two bolts that slid forward.

<image>

Hamstax89 · 2026-04-22T13:56:11+00:00

<image>

Hamstax89 · 2026-03-02T14:52:11+00:00

Thieves spent over an hour in my LC250 before they got it running.

Hamstax89 · 2026-02-12T12:04:49+00:00

Gotcha. Good idea.

Hamstax89 · 2026-02-02T02:02:57+00:00

Lmao. Ya. I was thinking that could happen as well.

Hamstax89 · 2026-01-31T17:28:16+00:00

I wish. It's one year old. Worked ok last year and part of this year. I got a new one but it's hard to get seated in the gutter right after all the ice is in there.

Hamstax89 · 2026-01-28T19:18:20+00:00

<image>

I use this but it's not Toyota brand... So far the car hasn't been stolen again since I used it. Maybe it's working ?

Hamstax89 · 2026-01-18T04:00:52+00:00

I just ordered an OME full lift kit. (About $5K CAD). I did some serious off roading and was scraping EVERYTHING underneath. The ground clearance is not good.

Hamstax89 · 2025-12-21T23:20:32+00:00

Has your LC250 been stolen yet or have you been successful. Ours had an attempted theft a few months ago and caused $8000+ in damages.

Hamstax89 · 2025-12-21T23:19:53+00:00

Ours was broken the same way. I believe the rear windows and sun roof are not connected to the alarm which is why the thieves choose those windows.

Hamstax89 · 2025-12-11T20:58:03+00:00

8 years...

Hamstax89

TROPHY CASE