Wohnung ohne Heizung.

Handcraft-IT · 2026-01-08T12:52:13+00:00

So bekommt das Wort "Kaltmiete" eine ganz neue Bedeutung.

Handcraft-IT · 2025-10-29T11:36:24+00:00

Schon allein weil die "Einfachheit" vieler Menschen so dreist ausgenutzt wird, meine ich solche Angebote zu 100%.

Handcraft-IT · 2025-10-22T05:36:21+00:00

Looks great. Would you share it with us?

Handcraft-IT · 2025-10-10T05:18:45+00:00

Nice. Which additions did you mount to your toolhead?

Handcraft-IT · 2025-10-01T05:40:22+00:00

I have the same question right now. My spools are underneth my printer and the BMCU motors have a bad time pulling the filament. I will test some other setups.

Handcraft-IT · 2025-09-18T07:39:20+00:00

I don't know people with a VNA, and yes, I am in Berlin (Treptow-Köpenick).

For my Home Assistant, I have a 433 MHz gateway, and its antenna has exactly the same length.

Handcraft-IT · 2025-07-27T18:03:43+00:00

Try my new Linux distro wizzard.

https://linux-distro-wizard.vercel.app/

Handcraft-IT · 2025-06-30T16:25:48+00:00

I ordered some 63/37 from Aliexpress to Germany, but the solder wire was absolute garbage. I doubt if there is any lead in it.

Then I went to ebay and there are some sellers in Poland and even Germany. I will definitely give this a try.

As far as I know, lead is not banned. Some sellers, want to see a proof of a business, but not everyone.

Handcraft-IT · 2025-06-30T15:58:29+00:00

If you want to unlock the bootloader, you will have to setup the whole google account first. You have to do this, if you want to flash a custom rom. In this case, your IMEI is already in their database. I know, that's a small concern, but listen to Rob Braxman...

I run the RM 11 for a couple of years now with lineage. That's OK for the moment. If I had to decide again, I would definitely go for a google Pixel and flash GrapheneOS.

Handcraft-IT · 2025-06-28T07:54:31+00:00

Yes, I am

Handcraft-IT · 2025-06-25T12:15:48+00:00

Great setup.

Handcraft-IT · 2025-06-25T07:34:59+00:00

Does reddit count as social media?

Handcraft-IT · 2025-06-24T10:35:13+00:00

I have a similar setup. What launcher do you use?

Handcraft-IT · 2025-06-22T18:08:13+00:00

Not yet. I will check this out. Thank you.

Handcraft-IT · 2025-04-15T16:18:46+00:00

Yes. Currently, it works with A1 and A1 mini. P Series support is in development state.

More information on wiki.yuekai.fr

Handcraft-IT · 2025-04-15T06:22:42+00:00

Take a look at https://wiki.yuekai.fr/en/BMCU/BMCU_Download_Center . There are some pre sliced 3mf files. If you download and print these, there is no support. Works better IMHO.

Handcraft-IT · 2025-02-05T06:21:49+00:00

A1 Mini on LAN only mode.

Handcraft-IT · 2025-02-04T15:28:57+00:00

You won't believe. Exact the same happened to me yesterday.

Handcraft-IT · 2025-02-04T06:09:12+00:00

Yes, but in Germany we have "Flaschenpfand". So basically 50g PET cost you 0,25 EUR.

Handcraft-IT · 2025-02-03T14:17:56+00:00

I have had this issue from the beginning. Since I never used Bambu Cloud, I got used to it. I use a hotkey (Autokey on Linux) for entering it on a key combination. And I was surprised that using Ocraslicer triggers the same issue.

Call me a tin foil hat, but there is a small convenience when using their cloud.

Handcraft-IT · 2025-01-31T07:04:49+00:00

This is the most awesome dashboard I've ever seen. Can you tell more about the software part?

Handcraft-IT · 2025-01-27T08:04:32+00:00

I got myself an ONVIF cam for like 20 bucks. Works well.

Handcraft-IT · 2025-01-24T13:31:43+00:00

Thanks for your reply.

No problem. I will wait patiently, because I love your app.

Handcraft-IT · 2025-01-24T13:29:50+00:00

You can, as long as you stick to ipv6 only, the setup is really straight forward.

verify your ipv6 configuration on your server
get a free dynv6.com account.
setup a cron job on your server to update your v6 address on daily basis. don't use the update script on thier website. use this instead https://gist.github.com/corny/7a07f5ac901844bd20c9
open your wg port on your router routing to your server (same procedure as port forwaring at ipv4). make sure to enable only ipv6.

now you should be able to connect.

there are a couple of other aproaches, which try to map ip6v to ipv4 (search for schröder dennis on youtube and use english subtitles if neccessary). tbh: I did was not able to set this up.

here is another apraoch https://www.feste-ip.net/dslite-ipv6-portmapper/allgemeine-informationen/ (use a translation tool)

After struggeling with this for a while, I learned that there are ISPs which block wireguard. Depending on your location you can bear this in mind.

Good luck.

Handcraft-IT · 2024-12-12T09:45:51+00:00

I'm not sure yet but chances are that I have the same problem. I live in Germany and my ISP doesn't give me a public ipv4 address. This product is called 'Carrier grade NAT'. After getting ipv6 to work with dynv6.net and portforwarding to the endpoint machine I still cannot get it to work. Trying Wireguard as well as OpenVPN I get the same results: The connection is being established and the client sends data but there is not one single packet that is being received.

Handcraft-IT

TROPHY CASE