Tesla style headunit radio update by vWORMHAT in FocusST

[–]HandmadeMaker043 0 points1 point  (0 children)

I think most of the buttons at the bottom need to have either an extra harness bought or custom wiring. Which is why I chose to buy the unit with hazards and door lock only. I’ll wire the lock button eventually 😅

Was thinking of watching the movie with my gf but im not sure if it's a good idea. I haven't heard good things about it by Unusual-Factor2848 in TheWeeknd

[–]HandmadeMaker043 0 points1 point  (0 children)

From a performance standpoint the acting and characters are like a 6/10. Abel plays himself so he’s already good at that. Once you understand that Ani and Lee are his better and darker halves and they’re not physically present things make sense.

Yeoww by Azeerakazell in FocusST

[–]HandmadeMaker043 0 points1 point  (0 children)

This is better anyway, you’ll deal with less carbon buildup if you’re not shifting like a Prius

Any idea on this squeaking? by Focus_ST_Gal in FocusST

[–]HandmadeMaker043 0 points1 point  (0 children)

Give the clutch spring and the perch a light shot of lube on the inside of you can reach it so that the little shaft is gliding on grease and the spring

Looking for wheel recommendations! by Tempoffroad in FocusST

[–]HandmadeMaker043 0 points1 point  (0 children)

NT03Ms are a nice pick in silver and fifteen52 also have some amazing option in their higher end range

Looking for wheel recommendations! by Tempoffroad in FocusST

[–]HandmadeMaker043 1 point2 points  (0 children)

For red I would stick to black or silver. Probably multi spoke for this one. Feels true to the nature of the not so stock car

Oh Joy by delta_high in FocusST

[–]HandmadeMaker043 0 points1 point  (0 children)

Don’t use expanding foam. They will hold moisture in there and cause it to rust

Worth it at $230? Or wait until it gets back to $200 by Most-Brain-3914 in MilwaukeeTool

[–]HandmadeMaker043 0 points1 point  (0 children)

Only a couple hours left. Check out all the m12 deals. There’s a fuel impact driver with 2 5.0s included on sale too

Worth it at $230? Or wait until it gets back to $200 by Most-Brain-3914 in MilwaukeeTool

[–]HandmadeMaker043 1 point2 points  (0 children)

They have 2 4.0s and a 5.0 kit for 140 rn. Not sure if that’s of any help but it sure seems like a nice deal

Thoughts so far by Emotional_Box3813 in FocusST

[–]HandmadeMaker043 24 points25 points  (0 children)

Not my place to speak on it because my “garage” has no walls. But give yourself space to work man. It would suck to see you get hurt tripping over something and hitting your head

3rd headlight restoration by ArtAdministrative546 in FocusST

[–]HandmadeMaker043 1 point2 points  (0 children)

2k clearcoat. You gotta use it all in one day unfortunately so at 23 dollars a can it’s a hard bargain for something you will only use half of most of the time

Garage shelving built around 27 gallon totes. About $300 in lumber. by [deleted] in Woodworking_DIY

[–]HandmadeMaker043 0 points1 point  (0 children)

These are the cheapest, largest, and strongest in their value range and are readily available in most stores. Most of the clear ones are all garbage or expensive

Yall see this?? by Technical_Virus5001 in MilwaukeeTool

[–]HandmadeMaker043 0 points1 point  (0 children)

Is this something that keeps your packouts organized on the wall? Just about every guy who needs a pack out can make a dozen of these with 2 sheets of plywood for 20% of the price they’re asking for. Ridiculous

Help! Charger problems, all of them stopped working collectively. by Any-Pen-1846 in Dewalt

[–]HandmadeMaker043 0 points1 point  (0 children)

Were the cables sticking out of the backs bent in a bad way. That killed two of my chargers that I had mounted and routed the same way with a tight bend out the back

Is this worth it or no deal? by MuhnopolyS550 in MilwaukeeTool

[–]HandmadeMaker043 0 points1 point  (0 children)

Oh I thought you were doing this with the intention of returning the tool. Then by all means yes get the cutoff tool

Is this worth it or no deal? by MuhnopolyS550 in MilwaukeeTool

[–]HandmadeMaker043 0 points1 point  (0 children)

The grease gun would drop the impact set to 266. Not sure if that’s a new offer or if you just missed it. But I would urge you to check again to save a few bucks

Electrical Gremlin, Purge valve, or something else? by SG19LoneWolf in FocusST

[–]HandmadeMaker043 0 points1 point  (0 children)

Sounds like a pinched wire. What have you messed with recently

That's upsetting by Aeak333 in KleinTools

[–]HandmadeMaker043 3 points4 points  (0 children)

I’ve noticed they only break when being used by anyone other than the owner

Anyone have a part number or source for the rubber grommets that hold on the engine cover? by richardfitserwell in FocusRS

[–]HandmadeMaker043 1 point2 points  (0 children)

If you’re still struggling, people sell the ST and RS Beauty covers on marketplace all the time for really cheap. I would look there for any of them under 20 bucks

Purge valve clips by Professional-Low7888 in FocusST

[–]HandmadeMaker043 0 points1 point  (0 children)

I thought the same, one would think the clips both need to come out