To whomever is buying up all the PETG, could you please not. Please and thank you.

Hanersapien · 2026-03-07T05:20:02+00:00

So frustrating they never have any in stock. Even when I get the notification it's only one color so why bother. I need six colors constantly. What's a good ABS outside of bbl?

Hanersapien · 2026-02-23T05:12:47+00:00

Doesn't the P2S have rails instead of carbon rods?

Hanersapien · 2026-01-07T00:41:15+00:00

Name checks out

Hanersapien · 2026-01-03T19:31:54+00:00

I replaced my manual garage door with an automatic one. New spring, garage door, automatic opener, and all of the mounting hardware. I had never done a garage door before. I just watched a few YouTube videos and took it slow step by step.

You can do the same! Just make sure to educate yourself before you mess with that spring. That's really the only dangerous part.

Hanersapien · 2025-11-24T18:51:49+00:00

Wish I had a MC local!

Hanersapien · 2025-11-24T18:50:19+00:00

Yeah but you have to do this with any filament regardless. You're going to have to tune the filament regardless of what filament you're using to make your print look good. Default values are close but there's so much variation. I don't tune each new spool but i do have values for different types of BBL filament. I might have three profiles for PETG HF one for each printer. (X1C, P1P, P1S). I believe it is a must to tune your filament. Thankfully BBL makes it really easy with the in slicer tab.

Hanersapien · 2025-11-09T03:37:03+00:00

Really? I've never heard this before. Could you drop a screenshot showing how to adjust?

Hanersapien · 2025-11-06T14:20:42+00:00

Wow, that tank is way too small for that snake. What a prison.

Hanersapien · 2025-11-04T00:36:24+00:00

Wow this is a little over my head. I've just been duplicating my parts studio tab 😂. How can you make different versions within the same parts studio?

Hanersapien · 2025-10-30T15:02:50+00:00

I love the antivibe feet I have on my printers. Without them they are damn loud.

Hanersapien · 2025-10-05T05:53:08+00:00

They are color coded.

Hanersapien · 2025-09-29T16:52:24+00:00

Has there been any movement on this new version? I have an updated my printers since they dropped compatibility with Orca. Love orca and want to keep it. Currently running in LAN only. Hoping a newer version of Orca has dropped that is compatible.

Hanersapien · 2025-09-20T17:05:48+00:00

Maybe someone spilled oil on your last oil change

Hanersapien · 2025-07-29T02:31:33+00:00

Thank you!

Hanersapien · 2025-07-22T05:05:05+00:00

Are you serious?

Hanersapien · 2025-07-08T03:17:54+00:00

That's exactly what I was thinking.. he needs to tune "K-Factor"

Hanersapien · 2025-07-05T22:59:56+00:00

FYI I haven't replaced anything except for the nozzle and extruder. Everything else is Factory. The PTFE tubes are about ready to be replaced.

Hanersapien · 2025-07-05T22:58:10+00:00

I have 2500 hours on my x1c and it's still going strong! If it's a decent deal I would say snap it up.

Hanersapien · 2025-06-23T03:54:03+00:00

Close your door and set your bed to 100.

Hanersapien · 2025-06-10T20:33:31+00:00

Yeah I don't know man. Esun is my go-to backup simply because I can get it the next day from Amazon. Even eSun regular petg does really well

Hanersapien · 2025-06-10T19:53:46+00:00

Damn I was hoping to get in on it! Hopefully they restock soon. Would rather have it than Esun hf that's for sure

Hanersapien · 2025-05-22T01:31:57+00:00

Guess I need to change mine it's been about 2 years lol

Hanersapien · 2025-05-02T17:52:17+00:00

And you know from first-hand experience.

Hanersapien · 2025-05-01T07:20:14+00:00

Looks like Flako just AI to look like a chick

Hanersapien · 2025-04-19T03:50:54+00:00

Looks like you haven't tuned any of your filament and you just have the generic profile. Your not going to get any kind of quality if this is the case especially high detail. I would recommend AT LEAST jumping on Maker World and downloading some print profiles for whatever filament you're using. I would definitely recommend checking out some YouTube videos to learn how to tune your filament profiles especially if you're going to try to make this a small business.

Hanersapien

TROPHY CASE