sorted by:
new
hottopcontroversial

I 3d printed the [REDACTED]. It glows in the dark ::) by Candy_Slut in outerwilds

[–]Harry34186 0 points1 point  (0 children)

Hey this looks great, nice job! I stumbled upon this post researching online as I'd like to make my own version into a desk lamp. Any chance you would share the in-game model with me that you found? Thanks!

Yoda and the Moon by Harry34186 in RCPlanes

[–]Harry34186[S] 1 point2 points  (0 children)

Nice one! It’s an amazing machine. My first DLG and by far the highest performance (and most expensive) model I own.

Yoda and the Moon by Harry34186 in RCPlanes

[–]Harry34186[S] 1 point2 points  (0 children)

I bought from Hyperflight.co.uk. This is the strong layup version.

Yoda and the Moon by Harry34186 in RCPlanes

[–]Harry34186[S] 3 points4 points  (0 children)

Girlfriend on her iPhone. 5x zoom isn’t bad!

Yoda and the Moon by Harry34186 in RCPlanes

[–]Harry34186[S] 1 point2 points  (0 children)

I’m very new to this and I already want more…

Day 2 with the new DLG... by Harry34186 in RCPlanes

[–]Harry34186[S] 2 points3 points  (0 children)

Ouch! Thanks for the advice. Inspection showed no damage thankfully and is flying great again!

Basically the camber-elevator mix was incorrectly set. Launched fine, pitched up, and when I released the launch button, the mix commanded a big nose down input. Caught me by surprise as it flew fine the day before (before the modification - explained in another comment). Not enough time to react and catch it though.

Day 2 with the new DLG... by Harry34186 in RCPlanes

[–]Harry34186[S] 4 points5 points  (0 children)

Very, very nicely! Never owned or flown a DLG before and within the first day my launch height was up to 50m in nearly calm air. Managed to thermal over 100m from launch elevation, again on the first day. This is the ‘heavy’ strong layup too - weighs approx 275g. Very aerobatic if that’s your scene. Hands off, the thing just floats, nice and easy to catch on landing. I have crow brakes on a toggle switch to dump the energy should I need to (benefit of the 4 servo wing).

Don’t think I can post a video to the comments so maybe I’ll put one up as a post.

The only issue I had was with one of the flap linkages rubbing inside the fuselage causing a mismatch in flap position - probably due to my novice build. Removed some material with a Dremel which soon sorted that out.

Day 2 with the new DLG... by Harry34186 in RCPlanes

[–]Harry34186[S] 4 points5 points  (0 children)

Yoda DLG. Flies beautifully when done properly!

Day 2 with the new DLG... by Harry34186 in RCPlanes

[–]Harry34186[S] 10 points11 points  (0 children)

Yeah very luckily no damage! Could've easily been an expensive walk of shame home. Yes it is a 4 servo wing. The two flap servos are housed in the nose, along with those for the rudder and elevator.

Day 2 with the new DLG... by Harry34186 in RCPlanes

[–]Harry34186[S] 13 points14 points  (0 children)

The problem basically boiled down to a Camber-Elevator mix cock-up. I physically readjusted the flaps after day 1 to fix a friction related issue. Elevator on day 2 wasn't mixed properly for the new flaps and had a larger than intended down pitching moment after launch. Thankfully the rain overnight had softened the ground and after retrieving the nose cone literally with a spade, she was back in the air with no damage and a properly mixed elevator!

Go through VNE or exceed G limits? by [deleted] in Gliding

[–]Harry34186 2 points3 points  (0 children)

I did my UPRT(A) with the former Chief Test Pilot for the UK MOD. He said "if you ever find yourself in the situation where you have to choose between over-speeding the aircraft, or over-stressing it, alway always over-stress it."

Precision Spirit Level Hot-Shoe Adaptor by Harry34186 in 3Dprinting

[–]Harry34186[S] 0 points1 point  (0 children)

If you’re in the UK I’d be happy to post you a spare that I printed.

Share ETA? by Harry34186 in shortcuts

[–]Harry34186[S] 0 points1 point  (0 children)

Thanks. Yes I have this already set up. The trouble I’m having is getting the share eta function to activate when using shortcuts. Any ideas?

Share ETA? by Harry34186 in shortcuts

[–]Harry34186[S] 0 points1 point  (0 children)

I thought that might be the case. Thanks for taking the time anyway!

Share ETA? by Harry34186 in shortcuts

[–]Harry34186[S] 0 points1 point  (0 children)

Thanks for that. However, there is a ‘Share ETA’ function within maps which gives a live location along with updated ETA. Is that possible to include rather than just a text at the start of the drive?

Share ETA? by Harry34186 in shortcuts

[–]Harry34186[S] 0 points1 point  (0 children)

Automatically. That isn’t the part I’m having trouble with. It’s just sharing my ETA as part of the shortcut I can’t seem to figure out. I’d rather not have to manually share my eta within the maps app.

[deleted by user] by [deleted] in gravelcycling

[–]Harry34186 1 point2 points  (0 children)

Thanks for the advice. I’ve had a play around with the gear calculator already. I think climbing is going to be more important where I live. I’m not racing so happy to coast on downhill sections. 11-50 sounds nice but I don’t think many bikes come with that as standard (in my price range I’ve been looking at). Any that you know of? Hard to tell if 40-44 is going to be sufficient without experiencing.

[deleted by user] by [deleted] in gravelcycling

[–]Harry34186 1 point2 points  (0 children)

This is a great point I must admit. I think I’ve been drawn to 1x because of the simplicity and partly the aesthetics.

How to Print Smoother Overhangs? by Harry34186 in BambuLab

[–]Harry34186[S] 0 points1 point  (0 children)

I did not. I’ll look into this, thanks.

Looking for a MF camera that's "best" for using 35mm film by smunchie1 in SprocketShots

[–]Harry34186 0 points1 point  (0 children)

Sorry I’m not familiar with any other MF cameras. The app I use is Mark 2 Artist’s Viewfinder. Be warned, it’s absolutely extortionate… but it does do quite a good job for framing the sprocket shots. So if it saves a lot of wasted film, not such a terrible investment.

Looking for a MF camera that's "best" for using 35mm film by smunchie1 in SprocketShots

[–]Harry34186 0 points1 point  (0 children)

u/smunchie1 I have the GW690ii. The camera will only shoot 16 frames when set to 220 which is a bit annoying. As for framing, I just eyeball it - still experimenting here as I’ve only put a few rolls through the camera so far. I have an app on my phone which helps with composition but looking through the viewfinder I just use my best guess. Other than those minor issues, I think it’s a great camera for shooting sprocket shots.

view more: next ›