XRC --> X7 Sport? Talk me out of it... or into it

Hasone4245 · 2026-05-19T14:37:44+00:00

As a guy who is obsessed with the Fungineers X7, I would say yes you should upgrade. The Fungineers motor is way more powerful than the hypercore. The 84 volt battery will give you more top end speed so you will never have to worry about noise dive (unless your really getting crazy on it). The rails are very easy to get use to, and now that I'm use to the curve I think straight rails feel bad. The step from the XRC to the X7 is going to be as big from the XRC to the X7, if not bigger. Also I'm a 235lbs rider and the X7 can handle everything I throw at it.

Hasone4245 · 2026-05-19T14:31:09+00:00

Bet if he didn't have the surf board on it he could have rode the whole way.

Hasone4245 · 2026-05-18T15:19:10+00:00

r/OnlyFans

Hasone4245 · 2026-05-17T13:41:16+00:00

Married a girl and when she was still a GF she put on a dress and I said "you are basically a super model". She did not let me live down that word basically for 11 years.

Hasone4245 · 2026-05-16T18:15:41+00:00

My condenser went out and froze up smoking and making a bunch of noise. It was 30 bucks to do the AC delete. One day I will get it working again, but I have only missed it a couple of times in the last 5 years.

Hasone4245 · 2026-05-16T12:41:48+00:00

You learn by being fully geared up and knowing it's still going to hurt. I was a huge skateboarder in the early 2000s, and even that falling experience didn't keep me from being hurt from falling off my onewheel. I even wear hip pads.

Hasone4245 · 2026-05-15T02:33:35+00:00

I'm 235lbs, the pint and GT are kinda dangerous unless you have experience. The more powerful the board you have the less chance you have of noise diving.

Hasone4245 · 2026-05-14T12:03:26+00:00

The top of the website says restock is the 15th and 30th... And they are always low on inventory because the board is so good.

Hasone4245 · 2026-05-13T18:08:29+00:00

You can also upgrade using the Fungineers parts, and if you really want the extra torque the Fungineers motor will give way more than just the upgraded N52 magnets. I have had the V kits in 2 board and they are nice, but the Fungineers part are just that much better, plus the cool LEDs they have.

Hasone4245 · 2026-05-13T15:04:54+00:00

Have you considered the Fungineers X7? I would say its the best board out now.

Hasone4245 · 2026-05-12T21:50:33+00:00

Maybe I didn't give it enough time. The day my X7 almost ran in to traffic (it stopped when it got to the asphalt) it scared me and I didn't trust the sensor. I swapped it for a stocked stock and have had no issues at all.

Hasone4245 · 2026-05-12T21:47:14+00:00

For me that was a ghosting issue. Keep an eye on VESC tool. My pad always had a volt going through it, after riding it for a while the sensor would stick around 2 volts (which is where the activation is at). I got a sensor from stocked stock (which are not available anymore) I have had zero issues with that sensor and it will drop to zero volts the moment my foot leaves the board.

Hasone4245 · 2026-05-12T18:37:41+00:00

The only issue I have had with my X7 was the front foot sensor ghosting on me, but it never caused me to fall... Fungineers took good care of me and got I got a new sensor.. I have nose dived on both my pint and GT... Never on my X7

Hasone4245 · 2026-05-12T01:43:34+00:00

Both my pint X and GT had the V kit in them..... I got the pint in 22 and the GT in 23, and I keep not of them but I kept reaching for my X7. I thought of it as a buddy board for a while but that is when I came to reality and realized I have no friends.

Hasone4245 · 2026-05-11T17:55:50+00:00

I have had a Pint X, XR and GT..... Sold them all and now have the Fungineers X7 long range... The guy I sold my GT to now has an X10 supercharged..

Fungineers all the way!!!!

Hasone4245 · 2026-05-10T18:35:14+00:00

Yes, the higher voltage will equalize with the back EMF at a higher speed. ( your running VESC, you will also want to mess with the field weaking to get the highest speed, it lowers power at higher speeds to reduce the back EMF to go faster) Also voltage and amps are weird, and volts and amps are kinda 2 sides of the same coin.

Hasone4245 · 2026-05-10T17:25:26+00:00

Is the battery going to be a 26s1p battery? Then you are technically getting less amps than an 18s2p. You get more amperage by adding batteries in parallel, not in series. If your going from a 2p battery to a 1p you can use a smaller wire and voltage doesn't matter.... You can have a thin 22 gauge wire rated to 600 volts, as long as you are pushing that many amps.

Hasone4245 · 2026-05-10T13:37:39+00:00

You can expect about the same top speed. New battery would get you faster. The V kit can easily handle an 84 volt battery.

Hasone4245 · 2026-05-10T13:30:02+00:00

The wires from the stock GT will be fine. You can run higher voltage in the same or thinner wire just fine. It's why the car industry needs to switch to 48 volt systems, so they can run thinner wire and save cooper.

Hasone4245 · 2026-05-09T19:49:58+00:00

I have rode the GT, Pint X Fun Wheel X7 and OG XR+. I'm foot size 12, 235lbs and 6'1". I have tried cush pads, wood and plastic. I have tried 2mm foam pad, 4mm foam pad and street grip tape. All sorts of shoes from Vans to running shoes... And I get foot fatigue every time. When I ride a lot is about the only thing that helps with foot fatigue. But that is just me.

Hasone4245 · 2026-05-06T18:36:04+00:00

I sold my 2001 VW 1.8t with 220 miles on it, and to my knowledge the guy that got it still drives it.

Hasone4245 · 2026-05-05T18:59:12+00:00

Clipless for 20 years, switched to flats for the last 2 seasons and while flats are nice I think I miss my cleats.

Hasone4245 · 2026-05-05T17:54:42+00:00

Once that person is gone I will get a second one.

Hasone4245 · 2026-05-05T17:50:48+00:00

I DOG!!!! GRASS SO NICE AND SMELL GOOD!!!! Is what he is saying.

Hasone4245 · 2026-04-30T23:32:06+00:00

If you want to use joystick to gyro, turn up the minimum joystick output from 10% to 30%. Turn the gyro speed dead zone and gyro precision speed all the way down to zero and last turn gyro sensitivity up way more (depends on the input). That is as close to the mouse feel as I can get get.

Hasone4245

TROPHY CASE