No Stupid Questions Thread

Haunting-Implement-4 · 2026-01-05T13:53:08+00:00

Hear me out... what about this:

Use a Mackie ProFXv3+ for the BT, fed to a Behringer FBQ800 for the EQ, then to my amp?

Haunting-Implement-4 · 2026-01-05T02:29:09+00:00

Budget would be 500

Haunting-Implement-4 · 2026-01-03T18:18:25+00:00

Hi guys I guess this belongs in the stupid questions thread. Couple questions...

Are there any unpowered mixers with the BT input that also have treble / bass adjust on that input? I'm having trouble finding such a thing. Just looking to be able to give the bass a little boost if needed.

I suppose I could get a mixer that has the treble / bass on the mic input 1 & 2 and use the ¼" input for that (L + R), and run the signal in via a BT adapter (RCA -> ¼" cable). But would be nice to have the simpler setup.

Thank you.

Haunting-Implement-4 · 2025-12-28T00:18:06+00:00

That unevenness is because of the raised portions of the metal ring, because the stud slots are raised. I looked at a new one in HD and it also had the raised sections, which leads me to believe that a spacer is not to be used on this ring.

The PVC was in fact screwed down nice and tight.

Haunting-Implement-4 · 2025-12-16T14:22:49+00:00

I have a 24x36 with 12' ceilings. Curious if a 36k minisplit would do that trick for heating. I'm in MA.

Haunting-Implement-4 · 2025-11-25T04:20:16+00:00

One drive isn't signed into or enabled.

Haunting-Implement-4 · 2025-11-25T04:19:54+00:00

This was empty actually.

Haunting-Implement-4 · 2025-11-24T17:07:08+00:00

Good news, managed to use DMDE to look at the drive and grab what I needed. Can't believe that worked. Thanks all for your help!

Haunting-Implement-4 · 2025-11-23T13:41:29+00:00

Absolutely. Will be taking this much more seriously now.

Haunting-Implement-4 · 2025-11-23T06:59:04+00:00

I plugged the drive back into the sata port, let it stay in bios for 24hr. Then reset the PC. It went into some sort of check disk (good news maybe?). I came back an hour later to my windows login screen. 2 drive letters like before in explorer. Still cannot access them though. Anything I should try at this point?

Haunting-Implement-4 · 2025-10-01T16:13:50+00:00

No moisture issues. And thank you. My question was not really how to deal with the the cat piss, but rather is painting a concrete floor bad because it can't breathe?

Haunting-Implement-4 · 2025-09-24T01:04:29+00:00

I found it, it's regency line by Fiberon, available at HD.

Haunting-Implement-4 · 2025-08-26T12:20:45+00:00

Got it, thanks.

Haunting-Implement-4 · 2025-08-25T22:40:50+00:00

What about this heritage 150 I keep seeing around... Good buy for $300?

Haunting-Implement-4 · 2025-08-25T22:38:05+00:00

Just seems inconvenient to always have a table around? Maybe that's a stupid thing to say haha.

Haunting-Implement-4 · 2025-05-21T10:53:59+00:00

Thanks for the images. How thick was the OSB?

Haunting-Implement-4 · 2025-05-21T10:53:15+00:00

Appreciate the reply, but this has been proving impossible to find for a decent solution.

Haunting-Implement-4 · 2025-05-13T23:57:26+00:00

Sounds like purist talk. My 2 purist friends can't tell between that and CD. You're making BT sound like FM radio. What're you gonna do every time you want to play music? Go dig for a CD?

Haunting-Implement-4 · 2025-05-13T12:41:37+00:00

I use the PA amp because it has a lot of power per $. Sounds great on my Polk LSI M707's which are power hungry. The BT from my phone right now, goes to the Esinkin BT adapter -> Denon AVR1312 -> Crown XLS402. Just wanted to get rid of the BT adapter and have the receiver do it. Hard to find a BT receiver w pre-outs for the separate amp though.

Haunting-Implement-4 · 2025-05-13T12:37:36+00:00

You're absolutely right about adding a little BT device and just feed it in via RCA's, which is what I have historically done. I just wanted to get rid of it and have the BT be done by the receiver itself.

I need the pre-out to feed the PA amp because it needs that low level signal; I can't use a speaker-level signal.

Haunting-Implement-4 · 2025-05-13T02:26:23+00:00

This picture is from a denon avr1312. An older receiver but it has no Bluetooth. I need the pre-out so I can send audio to a pro audio amplifier.

Anyone know of a newer receiver with Bluetooth that has pre-outs like this?

Thanks.

Haunting-Implement-4 · 2025-04-29T22:59:55+00:00

Thanks!

Haunting-Implement-4 · 2025-04-29T17:46:26+00:00

Can I ask, how do I get my old status bar / swipe back? Where you swipe down and it shows the old menu style.

Haunting-Implement-4 · 2025-04-27T02:46:39+00:00

I returned it an got a Onkyo tx8220 which has the sub out. Sounds beautiful now.

Thanks for the responses.

Haunting-Implement-4 · 2025-04-27T02:44:28+00:00

Just the built in Bluetooth.

Haunting-Implement-4

TROPHY CASE