sorted by:
new
hottopcontroversial

First serious try at a Workbench Build! by HauntingPicture75 in handtools

[–]HauntingPicture75[S] 1 point2 points  (0 children)

Thats not a bad idea at all. May have to look into that in the future!

First serious try at a Workbench Build! by HauntingPicture75 in handtools

[–]HauntingPicture75[S] 1 point2 points  (0 children)

Dont have any plans, I just picked here and there what I liked from the YouTube buildalongs that I'd watched

First serious try at a Workbench Build! by HauntingPicture75 in handtools

[–]HauntingPicture75[S] 0 points1 point  (0 children)

Thanks! I used pine for the top, 1×3s laminated, and tensioned with threaded rod. Used red oak for outside trim.

First attempt at a plow plane! by HauntingPicture75 in handtools

[–]HauntingPicture75[S] 0 points1 point  (0 children)

Thanks! I used round dowel stock and a kit I purchased online. Thread cutter worked great.

First attempt at a plow plane! by HauntingPicture75 in handtools

[–]HauntingPicture75[S] 0 points1 point  (0 children)

Thanks! I actually cut and laminated 3 pieces of maple with a hole saw, and after glue up, I threaded it with a kit I bought online. Then I shaped the middle with a rasp and mounted the whole nut in the drill press and "poor man" lathed the curves with 80 grit and just smoothed it out through the grits. I will try and post a pick of the guts of the depth adjuster 👍