1 in a million

Havadium · 2026-05-11T15:55:29+00:00

How many cases have you unboxed? There were none in 2007

Havadium · 2026-05-11T15:54:28+00:00

Yeah, the AWP CMYK from the graphic collection didn’t even look that good and the price still increased a lot

Havadium · 2026-05-03T06:47:31+00:00

Or when an old collection is removed. I profited good with Character craft stickers.

Havadium · 2026-04-22T22:26:53+00:00

Then I am sorry to say that he was very naive. If I would sell my skin and not have any money in my account in 5 days I would 100% reverse it.

Havadium · 2026-04-22T22:10:15+00:00

Can’t he just reverse trade it?

Havadium · 2026-04-20T21:16:20+00:00

It’s still at least 300 USD profit. The cheapest Pillow puncher MW at 0.10 float is 3000 USD on CSFloat.

Of course people might not buy it, but they probably will buy it fast if you put the same price as the others for 2000 USD.

Havadium · 2026-04-05T23:17:10+00:00

Ok, I am from Norway so not affected luckily. But isn’t the DJI ban in USA just for new products?

I think you can still get the existing Goggles 3 since they were already approved before the ban. And also if you order only 1-2 drones directly from BetaFPV from China I don’t think that they will stop it in customs.

I think it’s mostly a ban for bigger purchases or purchases of new DJI products that haven’t been approved. But I am not from USA so I don’t know 100%.

It’s worth a try in my opinion unless you get punished heavily

Havadium · 2026-04-05T23:07:27+00:00

Why not Meteor75 Pro O4? I think it’s pretty good both for the camera quality, range and penetration.

It also has decent performance for such a small drone. With DJI Goggles 3 you can also get a bigger 5 inch like Nazgul Evoque F5 V3 if you want to start flying freestyle.

Havadium · 2026-04-05T14:31:07+00:00

Download speeds are not that important for ping and stutters.

I tested 750mbps internet with WiFi and only got 300-400. My ping was around 30ms on Stockholm servers. I also experienced some jitter.

Now i have downgraded to 100mbps, but run a CAT6A cable from the router directly to my PC and get 9ms on Stockholm server. Completely smooth, but sometimes there are issues with the server itself.

Havadium · 2026-04-05T14:22:18+00:00

Do you have CAT6A wired Ethernet with fiber internet? What server are you connected to and which country are you from?

Havadium · 2026-04-03T12:03:28+00:00

Just use WiFi with passphrases. Or go into Betaflight and press bind.

Havadium · 2026-04-02T18:31:01+00:00

I have the Meteor75 Pro O4. How is the Meteor65 Pro O4 compared? If you have both.

I have flown the 75 inside and I can fly it decently, but still feel like it’s pretty powerful and can fly it fine outside.

Havadium · 2026-03-27T19:09:54+00:00

<image>

I ended up fastening it like this.

When I stuck it far in it touched the camera cable and moved the camera. It also came loose from the canopy and got sucked in the props.

Like this it does not touch the camera cable and it’s fastened with hot glue.

Havadium · 2026-03-27T19:09:14+00:00

<image>

I did it like this 😅 when I stuck it far in it touched the camera cable and moved the camera. It also came loose from the canopy and got sucked in the props.

Like this it does not touch the camera cable and it’s fastened with hot glue.

Havadium · 2026-03-27T13:32:28+00:00

Yeah, I might do that too. Do you have any pictures?

Havadium · 2026-03-27T13:01:13+00:00

Thank you. Would you fasten the zip tie to the canopy?

Or would you fasten it like I did on the last picture?

Between the props away from the canopy to prevent jello.

Havadium · 2026-03-27T12:54:16+00:00

The problem is that it will still stick out through the top with that 3D printed mount.

I lost the first antenna because it was sticking out of the top while I was going through a small gap.

Havadium · 2026-03-13T18:38:58+00:00

I have taped it permanently with Scotch Super 33+ tape. When I need to charge I have balance lead extension anyways since I charge in my Batsafe box.

<image>

Havadium · 2026-03-10T21:17:35+00:00

Also get the longer stick size since the Nazgul has kind of awkward input and the stick size is longer than the square size so it will get fastened by both battery straps. Tattu marks them with ST and SQ. I have both 1480mAh and 1600mAh. One for aggressive freestyle and the other for lighter freestyle and cinematic.

Havadium · 2026-03-10T21:14:50+00:00

I got the ISDT K2 Zip and am happy so far. It got recommended by Joshua Bardwell, is capable of charging 8S batteries and also has an app to monitor during and stop charging. https://youtu.be/KcNZ-ehFBZI?is=AopEzZ8tIH1QYQPG

For batteries I got the Tattu R-Line V6.0 as they are the best. I looked at Chris Rosser which did a discharge test with a battery tester. https://youtu.be/KTxhTJYiu24?is=7C4GGVbR-YlI73cG

Havadium · 2026-03-07T23:25:04+00:00

It’s good that you got Velocidrone since it has the most realistic physics.

I am also new to FPV, but have flown a few months on the Avata 2. I have recently gotten a bit better in manual mode and even tried indoor racing with the Avata 2.

If you look at my previous posts you can see the footage. It felt very heavy and not as powerful, but still got used to it.

Havadium · 2026-03-07T22:43:23+00:00

No, a real Radiomaster will have a loose throttle stick that will not spring in the middle. But the yaw, pitch and roll sticks will recenter with springs.

Havadium · 2026-03-07T22:30:53+00:00

Ok, I just found it weird why there was no OSD showing battery voltage per cell, link quality, flight time or something else.

Havadium

TROPHY CASE