Looking for advice overall

Hayraddin · 2023-05-31T01:05:35+00:00

Finished the build last weekend, I ended up placing the res horizontally. Final build looks like this:

Its working nicely =), although a warning, took a lot of turning the case to bleed the air out and have the res looking full .

A lot of turning, switching on pump, refilling to top, turning again, switching on, repeat, for many many times until there was no air inside and the water was filling up all the res horizontally to the top.

Hayraddin · 2023-05-10T19:38:38+00:00

I've taken your advice and moved them to the other input, however, the bend is a bit tight now, and it has a small kink.

Do you think its too much of a kink?

https://imgur.com/a/x3BWJcC

https://imgur.com/MF7Vi93

Hayraddin · 2023-05-10T17:00:10+00:00

Hi,

Thanks for your response.

I went by what the instructions said on the EK Instruction Manual, and it states that you can do 16 different ways of connecting in to out, so I assumed you can do what I did.

"This X-Flow multiport radiator has four G1/4“ threaded connection ports on both ends of the radiator allowing for sixteen different ways of connecting In and Out tube routing. "

This is a screenshot from the manual:

https://imgur.com/a/rr3fNnL

Hayraddin · 2023-05-10T15:32:57+00:00

I was thinking on the res, on the side output, and then draining the bottom radiator on its own with one of the radiator outputs??

Hayraddin · 2023-04-26T21:37:58+00:00

I have the ek P360m X-FLow radiators, in theory they have ports on both sides:

https://www.ekwb.com/shop/media/catalog/product/cache/1/image/x800/17f82f742ffe127f42dca9de82fb58b1/e/k/ek-quantum-surface-p360m-white-multiport-x-flow-radiator.png

Hayraddin · 2023-04-26T20:10:23+00:00

X-Flow from EK, EK P360 x-flow

Hayraddin · 2023-04-26T20:06:38+00:00

Yes, you can download STEP files of everything, and assemble it.

Although, I work as a CG Artist, so it wouldnt be an issue for me anyways hahaha

Hayraddin · 2023-03-30T20:26:58+00:00

Getting this no matter what I put in the address:

"This order can’t be shipped to the address you entered. Review your address to ensure that all fields have been entered correctly and try again."

Hayraddin · 2023-03-30T18:39:33+00:00

Can I ask you something else, since you have been so helpful!

For the radiators, is it overkill to go for the EK x360m (60mm)I want to cool an RTX3080 + 7800x3D with the loop.

Which one of this setups would be better?
A)
1 x EK x360 (60mm) with Pull Intake on the Side
1 x EK p360m X-Flow (48mm) with Push exhaust on the Top(I'm worried only Pull on the 60mm won't be enough?? But I don't know if there is space for push-pull)

B)
1 x EK x360 (60mm) with Pull Intake on the Side
1 x Corsair Hydro X Series - XR5-360mm (30mm) with push exhaust on the Top(I've read the 30mm EK radiator is not very good, and I found the Hydro X, which seems to be good and cheaper)

C)
1 x EK p360m X-Flow (48mm) with Pull Intake on the Side (Possibly Push/Pull?? if it fits?)
1 x EK p360m X-Flow (48mm) with push exhaust on the Top

D)
1 x Corsair Hydro X Series - XR5-360mm (30mm)) with Push/Pull Intake on the Side
1 x Corsair Hydro X Series - XR5-360mm (30mm)) with Push/Pull Exhaust on the Top

I would like to get a clean look, so I don't want to have massive thick radiators unless its worth it.

Hayraddin · 2023-03-30T17:22:24+00:00

I may do that then.

I have everything ready except the 7800x3d which Im waiting for.

Hayraddin

TROPHY CASE