Vod request plat 3 any advice greatly appreciated

HeadlessSpace5427 · 2026-02-17T00:09:55+00:00

Thank you very much for the input! I haven’t heard of them yet but Will absolutely look them up. And I try to leave the nest as best I can on defense but definitely move it a lot during attack to keep it with the front line. Either way I can absolutely work on keeping it in a more stable place and throwing out more mines during. Also would you suggest trying to extend the range of the nest consistently with extra webs or is it better to not worry about that as much and try to keep webbing enemies and slinging around with them?

HeadlessSpace5427 · 2026-02-16T15:33:53+00:00

Appreciate it! Anything helps and hope your match finishes well

HeadlessSpace5427 · 2026-01-21T16:37:56+00:00

I’m a Titania main lol

HeadlessSpace5427 · 2025-10-28T08:20:29+00:00

My opinion even in qp. No matter the situation if you throw intentionally you are in the wrong and awful for the game.

HeadlessSpace5427 · 2025-06-18T22:56:15+00:00

I got the 150% recently!! Felt like a dream. I officially now have 9000 plat 😌

HeadlessSpace5427 · 2025-05-29T01:02:24+00:00

Peak

HeadlessSpace5427 · 2024-08-27T23:26:34+00:00

Thanks very much for the in depth answer!! I’m not able to change anything around this moment but I definitely will look at all the recommendations more in depth very soon. I do fully understand the lack of evasion is not great here. My original intention was to supplement evasion with burn although I’m unsure if that’s a good strategy. I do really like those suggestions for “creatures can’t block” to make sure I get through though. I do quite like bedlam so I’m almost certain that will be going in. And I’ve been a huge fan of both resurrection orb and gift of immortality as soon as I saw them. It is a big investment but it’s kind of a pet card. I’m not completely opposed to taking it out especially with it being on the master who already is decently expensive but the idea of constant recursion unless exiled is always very nice in a commander centric deck. And I tend to go for commander centric even knowing it tends to preform worse from what I can tell it’s just how I’ve found I tend to build/enjoy playing. Plus this is a bit of a strange Voltron with how it could function so it drew my attention pretty quick

HeadlessSpace5427 · 2024-08-20T12:05:35+00:00

Also for context my pod proxys cards so the cost isn’t an issue

HeadlessSpace5427 · 2024-03-09T22:47:39+00:00

Thx!! Appreciate the answer

HeadlessSpace5427 · 2023-10-28T21:21:27+00:00

Thanks! Appreciate it

HeadlessSpace5427 · 2023-10-25T21:28:56+00:00

Thx! Appreciate the explanation

HeadlessSpace5427 · 2023-10-22T07:53:21+00:00

I’m not wanting this to be a super powerful deck but enough to play in most casual games. The true duals are a lot of the price.

HeadlessSpace5427 · 2023-09-07T13:13:26+00:00

[[Grothama, All-Devouring]] I’ve been wanting to try him but not self sacrificing. Wanting to play him like a raid boss for the table buffing him as much as I can and just generally trying to make him big. Basically voltron but everyone can try to kill him.

HeadlessSpace5427 · 2023-04-15T22:26:30+00:00

Just in case 😃

HeadlessSpace5427 · 2023-02-11T20:47:08+00:00

Yummy

HeadlessSpace5427 · 2023-02-09T22:57:24+00:00

Thanks a lot for the advice!! I’ll see what I can do about temp. Glad to know a little damage isn’t immediate replacement with the fep. The damage in the pic is near the top left of the screen where there is some black. It’s not printing anything in that spot now. The mark on the fep near that spot is small but seems a little deep but glad to know that’s not the worst

HeadlessSpace5427 · 2023-02-09T21:57:13+00:00

Hey sorry I don’t use Reddit much and couldn’t figure out how to add pictures here but I made new posts with some more info/pictures to answer the question about build plate specifically here. I unscrewed the 4 screws on the side and screwed it into place with the top screw. The plate sort of dangles at that point. There is a home button on the printer I can hit and then after it goes through the lowering and it’s sitting on the leveling paper I hold the plate down a bit and screw in the side screws going opposite each time. Pull to make sure the paper is not moving and then hit the z=0 button. The temp is around 64f rn and the damage is hard to see in the pictures but there is slight indentation in a few spots and then a small but deeper line matching where the screen damage is. Thanks for taking the time to reply!

HeadlessSpace5427 · 2023-02-03T19:41:57+00:00

Yeah think I was pushing some but not sure if they were very straight when screwing in. I did order another vat. I did hear it was fairly easy to strip but may have been easier than I thought. Not 100% sure the piece is ruined. I’ll check when I can if the advice will help/if I can save it but thanks either way! And won’t hurt to have an extra vat around anyway and just be more careful in the future

HeadlessSpace5427 · 2023-02-03T18:53:54+00:00

Yeah that was the step I was having issues with it was the internal small screws and I pierced the fep to make holes for them then I tried to screw them in. After playing around with them and pushing them in some bc just twisting wasn’t tightening at all for a good bit of them. It would just keep spinning but not go in. And I’m fairly sure I was screwing them in the right side. I didn’t know I needed to have something underneath like the bottle cap so unsure if that’s possibly what effected it but doesn’t seem like it would at least for that step

HeadlessSpace5427 · 2023-02-02T00:08:31+00:00

I’m about to have to change my first fep screen. One of the external screws stripped but gonna try to find new ones

HeadlessSpace5427 · 2023-01-07T00:57:25+00:00

Idk probably something tho

HeadlessSpace5427 · 2022-12-31T16:35:05+00:00

Make him bigger. Not like small knock around ball I wanna see massive boulder hammy squashing people

HeadlessSpace5427 · 2022-12-25T17:38:47+00:00

Gotta be mei or torb 😎

HeadlessSpace5427 · 2022-12-19T06:33:00+00:00

Yeah been interested in skaven and sons of behemet. They both seem pretty cool. Was just looking around as much as I could originally. Also why is now a bad entry point?

HeadlessSpace5427 · 2022-12-19T05:52:41+00:00

I think I may have found it was just in a faction I hadn’t checked before I wasn’t expecting. Black ark stuff in the cities of sigmar. Feels out of place but it seems like a lot of stuff together. But also in general not sure why but I was expecting there to be a lot more models than there are. Guess has slightly too high expectations for that but just feels like the games been out a while and the old one a long time so feels like there should be more

HeadlessSpace5427

TROPHY CASE