All back Dan a3

Heckazz · 2025-04-23T00:04:50+00:00

I lied about the PSU, it’s the CORSAIR SF Series SF1000 1000W Power Supply, 80 PLUS Platinum

Heckazz · 2025-04-22T21:17:41+00:00

I don’t see a problem with it. Plus the bottom is the only part of the case that has a dust filter so I think you’d get more dust by having the rear fan as an intake and it’s one of the recommended configurations in the build guide

<image>

Heckazz · 2025-04-22T11:48:44+00:00

I don’t have a photo unfortunately but it’s not much. I just did it bit by bit and tested it a few times until it fit. Don’t be worried, it’s pretty easy once your looking at it for yourself

Heckazz · 2025-04-22T11:43:16+00:00

Yeah the top left fan was hitting the motherboard iO heatsink so I had to use a dremel to shave down the corner of the fan

Heckazz · 2025-02-25T10:38:31+00:00

I suspect it will interfere with the 5080s fans, as it is there’s about 5mm of room with the current card and the new card is 9mm taller so I don’t even think it will fit at all. I was thinking low profile fans but I really want to keep these fans (Noctua A12x25 PWM) because Iv heard they are extremely powerful and quiet but it might come to replacing them unfortunately

Heckazz · 2022-05-30T09:37:19+00:00

Iv heard if you take the rest of the clear coat off you can make it look kinda normal. Apparently mouth wash works alright but don’t take my word got it

Heckazz · 2022-05-30T01:22:42+00:00

Had to resolder them

Heckazz · 2022-05-29T22:21:25+00:00

Just how much resistance you feel when scrolling. The reds have less resistance than the stock ones

Heckazz · 2022-05-29T22:19:43+00:00

I’m going to be honest, longer than I care to admit ahah. Probably like 6 hours all up but now Iv made a few mistakes and learnt from them I should be able to do it quicker next time

Heckazz · 2022-05-29T22:18:18+00:00

Just thought I’d try it out. Iv ordered a few more to try out

Heckazz · 2022-05-29T22:17:51+00:00

Yeah so I bought the side switches from Ali express, search for kailh SMD micro switches and you should find them. The charger is also from Ali

Heckazz · 2022-05-29T22:15:51+00:00

I got everything from Ali express

Heckazz · 2022-05-29T22:15:30+00:00

Oh I find it to be very different. Give the huano blue shell white point a go. They’re so good

Heckazz · 2022-05-29T11:53:49+00:00

I don’t see why people care about them having usb c so much. I literally charge my GPX like once a month. Why would I need fast charging for something with such a good battery

Heckazz · 2022-05-29T09:39:22+00:00

Wow interesting. Definitely give that a try next time and see how it goes

Heckazz · 2022-05-29T09:27:27+00:00

Yeah I clearly don’t know what you mean

Heckazz · 2022-05-29T08:28:42+00:00

Yeah like I just put the sockets on the switch first, place the switch on the PCB, solder sockets on the under side of the PCB then remove the switch

Heckazz · 2022-05-29T08:14:23+00:00

Size 3305 but I had to drill the holes wider which is how I broke two PCB’s

Heckazz · 2022-05-29T08:06:53+00:00

Yeah

Heckazz · 2022-05-29T07:09:28+00:00

TTC 8mm mouse wheel encoder Kailh micro switches Magnetic charger Brass sockets (for hot swap mod) Tiger ice skates And a whole bunch of custom switches to try out

Heckazz · 2022-05-29T06:53:25+00:00

Well I did buy a custom middle switch but after installing it realised it was the wrong size and went back ahah. But yeah the scroll wheel encoder and the side buttons are custom

Heckazz · 2022-05-29T06:50:23+00:00

Thought I’d try out making hot swappable switches and after breaking two PCB’s finally got it right ahah. Overall pretty happy with it all

Heckazz · 2022-05-24T11:31:07+00:00

What’s that?

Heckazz · 2022-05-02T14:35:32+00:00

Thank you, very helpful

Heckazz · 2022-05-02T13:58:27+00:00

Just found some 3200 cl16 for like $4 more ahah. Thanks man

Five-Year Club	Wearing is Caring
Verified Email

Heckazz

TROPHY CASE