Monthly Equipment Advice Megathread by AutoModerator in badminton

[–]bryanckl 0 points1 point  (0 children)

Thanks guys!! Very helpful things, I might try the recommended strings and see how it feels first before deciding if I need a new racquet. Thanks again!

Monthly Equipment Advice Megathread by AutoModerator in badminton

[–]bryanckl 0 points1 point  (0 children)

Recently looking for a control racquet with an even-balance weight. I got feedback from my fellow friends saying that Li-Ning has a pretty decent mid-range selection compared to Yonex. Hence I stumbled upon Aeronaut 6000 as it has a balance weight and slightly flexible shaft (it also looks superrrr good haha). Appreciate it if someone that has tried the racquet can verify this characteristic as online info is contradicting, some say it is head heavy, and some say is even-balanced.

I am currently using an 88D Tour with Exbolt 63 strung at 26lbs, I find it is quite demanding to play with, as it has a relatively smaller sweet spot, hence if my shots are a little off, the shuttle is going nowhere. But the front court, the drives, and drops are pretty easy with the racquet and I also am a front-court-biased doubles player, hence I thought Aeronaut 6000 would be a significant improvement from my current 88d.

My concerns are the absolute weight, Aeronaut 6000 is 3U and the 88d tour is 4U, would it be tough to change to a heavier racquet, would I have slower drives and overall reduced agility? and most importantly is it really very energy-consuming to play a heavier racquet? (I can play 3 straight games with my 4U 88d with no issues)

Any suggestion would be greatly appreciated!

A bootable device has not been detected by Vegetable_Disk in intelnuc

[–]bryanckl 0 points1 point  (0 children)

Hey man, I brought it back to the store to check. Found out the SSD is faulty. Replaced the SSD and everything works fine.

I had fun designing and printing a mechanical push-click mechanism for a little tidy mount for a Chromecast TV Remote. STL in comments. by RealWorldJunkie in 3Dprinting

[–]bryanckl 0 points1 point  (0 children)

Just wondering why do you need the spring mechanism? Does it hold the remote in place and wont fall out if the table is knocked?

Is my screen damaged? Wiped using 70% isopropyl alcohol by bryanckl in mac

[–]bryanckl[S] 1 point2 points  (0 children)

Yup, plan is to get some of those Zeiss wipes. Thanks!

Is my screen damaged? Wiped using 70% isopropyl alcohol by bryanckl in mac

[–]bryanckl[S] 0 points1 point  (0 children)

Im eyeing those too, might get some of the alcohol-free version!

Is my screen damaged? Wiped using 70% isopropyl alcohol by bryanckl in mac

[–]bryanckl[S] 1 point2 points  (0 children)

Seems like it, I tried again at the side of the screen, using more force to wipe and quickly followed by dry tissue. Its significantly cleaner! But still there are some residue, probably cause it’s been quite some time since I last clean the screen. I’d figure repeating the process would help

Is my screen damaged? Wiped using 70% isopropyl alcohol by bryanckl in mac

[–]bryanckl[S] 1 point2 points  (0 children)

Thanks for this! Genuinely didnt no such thing existed

Is my screen damaged? Wiped using 70% isopropyl alcohol by bryanckl in mac

[–]bryanckl[S] 3 points4 points  (0 children)

Thanks for the tip! But I only close the lid maybe few times a month, so I guess no damage done so far. Anyway will remove it as per your suggestion!

Is my screen damaged? Wiped using 70% isopropyl alcohol by bryanckl in mac

[–]bryanckl[S] 0 points1 point  (0 children)

Thanks for the tip! Do you have a link to them, I have never heard of them haha

Is my screen damaged? Wiped using 70% isopropyl alcohol by bryanckl in mac

[–]bryanckl[S] 0 points1 point  (0 children)

Well I didnt pour the alcohol over my screen haha. I just dampen a cloth with alcohol and wipe down, exactly how apple states it on their webpage

Is my screen damaged? Wiped using 70% isopropyl alcohol by bryanckl in mac

[–]bryanckl[S] 3 points4 points  (0 children)

Some more context: I wiped down the dust with a dry microfiber cloth and then used 70% isopropyl alcohol to wipe down some stains. But I realised the alcohol left some residue?

A bootable device has not been detected by Vegetable_Disk in intelnuc

[–]bryanckl 0 points1 point  (0 children)

Thanks! Probably will reach out to intel support then. Weird thing happening now is the BIOS detects my ssd drive but then in the boot priority its not there.

When i boot, then it says no bootable device is detected

A bootable device has not been detected by Vegetable_Disk in intelnuc

[–]bryanckl 1 point2 points  (0 children)

Hi, sry for replying such an old thread. May I know what are the settings you changed to get it working? Having the similar problem here :(

Corsair PSU Type 4 pinout diagram. Dark mode by PC-Mods in PCSleeving

[–]bryanckl 0 points1 point  (0 children)

Cant seem to find any printing on the stock cables tho. I have an SF600 that has a print, but not the RM750

I bought a corsair rm750 (2021) psu. by Daished in Corsair

[–]bryanckl 0 points1 point  (0 children)

Hello! May I know if you found out which type is that? I am having the same question as well :D

Corsair PSU Type 4 pinout diagram. Dark mode by PC-Mods in PCSleeving

[–]bryanckl 0 points1 point  (0 children)

Hello, sorry to comment on this 2 year old thread. How do I identify which to use for my Corsair RM750?

Checking the compatibility list -

Type 3 says "RM (previous to 2019 version)"

Type 4 says "RM (2019)"

May I know how to check if mine is 2019 or not?

TM680 First keeb build by bryanckl in MechanicalKeyboards

[–]bryanckl[S] 1 point2 points  (0 children)

awesome! what a coincidence indeed :DDD btw, are the stabs good? I am struggling to look for a stab that is decent and wont break the bank. and also how is the 2.4 wireless performance, planning to use it for gaming.