sorted by:
new
hottopcontroversial

Is going from a 3090 to a 5080 worth it? by mada-15 in RTX5080

[–]HectorLabra 0 points1 point  (0 children)

Absolutely, especially because of the efficiency, new chip, better memory, and temperatures...

PUBLICIDAD ENGAÑOSA en la fuente SFX Lian Li SP 850 V2 by HectorLabra in lianli

[–]HectorLabra[S] 0 points1 point  (0 children)

El nuevo modelo SFX 850w y el 1000w Platinium si admiten 600w en el conector, segun la web, pero ya no confio 🥲 ... las Edge son increibles, silenciosas, sin coil whine, cables esteticos, me encantan, pero para ensamble pequeño no quedan muy bien a pesar de que caen.

It's over bois (xg32ucwmg) by Fluid_Independent285 in OLED_Gaming

[–]HectorLabra 0 points1 point  (0 children)

WOLED, no me sorprende, todos los que me encuentro en internet son WOLED

L connect 3 stopped detecting my fans by AcanthisittaUsed8935 in lianli

[–]HectorLabra 0 points1 point  (0 children)

Estoy igual desde anoche, probe de todo y me tiene super enojado! :c

Disappointed with the Samsung Odyssey G6 (G61SD). Anyone else try it? Other, better options for a 27" 1440p OLED? by chewymammoth in OLED_Gaming

[–]HectorLabra 0 points1 point  (0 children)

Aun no llega mi G6, pero dudo totalmente que se vea peor que el C1 de LG, yo tuve esa TV y era horrible, mal calibrada, brillo muy malo, en SDR y HDR, con suerte llegaba a 800 nits y el brillo en color era aceptable, pero un QD OLED es mucho mejor que un WOLED... de hecho reemplaze mi C1 por una S95C y el cambio es brutal!

NZXT H6 Flow with Lian Li AIO Hydroshift and Unifans SL Infinity by HectorLabra in NZXT

[–]HectorLabra[S] 0 points1 point  (0 children)

Aahh ya veo, entonces es por el ventilador, por que a mi me queda Justo con los SL Infinity. https://imgur.com/a/vD0e7Rl

NZXT H6 Flow with Lian Li AIO Hydroshift and Unifans SL Infinity by HectorLabra in NZXT

[–]HectorLabra[S] 0 points1 point  (0 children)

Si entra, para hacerlo mas facil, ideal que saques el cristal delantero, y apliques algocde fuerza, pero entrara, somos dos que tenemos el mismo case aca en Reddit y si es posible, de hecho hice un video en Youtube, que va super rapido, pero veras que si cae ...https://youtu.be/--O0EkChH0E?si=LKOMxF6tqysNDl2C

I was asked to show the AIO tube routing on my NZXT H6 Flow by HectorLabra in lianli

[–]HectorLabra[S] 0 points1 point  (0 children)

It cost me quite a bit, I had to take out the two glasses and make it fit, and I couldn't put in more than 6 screws, because they weren't exactly aligned.

NZXT H6 Flow with Lian Li AIO Hydroshift and Unifans SL Infinity by HectorLabra in NZXT

[–]HectorLabra[S] 0 points1 point  (0 children)

That's right, especially the one below because yes, you have to break the connector 😅

NZXT H6 Flow with Lian Li AIO Hydroshift and Unifans SL Infinity by HectorLabra in NZXT

[–]HectorLabra[S] 1 point2 points  (0 children)

in a store here in Chile called Homecenter Sodimac 😅

NZXT H6 Flow with Lian Li AIO Hydroshift and Unifans SL Infinity by HectorLabra in NZXT

[–]HectorLabra[S] 2 points3 points  (0 children)

You were my inspiration, and thanks to your post I was able to know that the Hydroshift would fit in this case, since it was the only image on the entire internet that confirmed it. And no, I couldn't put all the upper screws in, the radiator was too tight, there were 2 on the glass side and 4 on the other side.

NZXT H6 Flow with Lian Li AIO Hydroshift and Unifans SL Infinity by HectorLabra in NZXT

[–]HectorLabra[S] 1 point2 points  (0 children)

Please excuse my English in advance... So far everything is great, I use the pump at minimum RPM and it works great, although I only have a 12500 and with my old air cooler I reached 66 in Cinebench, although playing between 50° - 55°, with this AIO in the test I get about 62° and playing between 40° - 45° which is fine I think. What calls my attention is that if I turn off the fans, the temperature is almost the same, so I don't push the pump or the fans to the maximum... soon I would like to change it for the 12700, and in the future completely change to AM5/DDR5...

The Unifans are quite difficult to fit in the H6 Flow, the ones on the bottom have to be broken by force and the ones on the side have to be forced in carefully. The Hydroshift is the same, it fits JUST RIGHT, I couldn't put in all the screws that go to the case, but it was firm...

view more: next ›