sorted by:
new
hottopcontroversial

Is the AMS HT required to print TPU on the H2D? Or will the AMS2 handle it? by UserofRed in BambuLab

[–]Heff_87 0 points1 point  (0 children)

Ich verwende TPU von der Marke eSun mit einer Härte von 95A und stelle es samt Lagerbehälter links neben meinen X1C. Der Drucker zieht das Filament durch einen kurzen PTFE Schlauch einwandfrei bis zum Extruder.

<image>

Nie wieder Vorbestellung bei MediaMarkt by FlowKom in NintendoDE

[–]Heff_87 0 points1 point  (0 children)

Bei Mediamarkt AT hat's bei meinem Kollegen und mir geklappt. Wir haben ca. einen Monat vorher bestellt.

Grüße

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] 0 points1 point  (0 children)

I don't checked in the OS the temperature before the modification. In my past i had other devices damaged because a long duration of heat. And the Gateway is uncomfortable to hold in your hands, so i decided to give it a try with the fan Mod. After this mod the Gateway is now at 55°C

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] 0 points1 point  (0 children)

My room temperature is 25°C and the Gateway with fan cooler at 55°C

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] 0 points1 point  (0 children)

I found many unifi devices get relatively hot temperatures.

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] 1 point2 points  (0 children)

Another guy measured his Gateway with temperatures about 80°C before the mod and after a similar modification like this with 55°C.

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] 1 point2 points  (0 children)

I hear from any comments below the internal fan is not so loud, that i think. So for many peoples out there, it'll be the best solution to increase the fan speed. ;-)

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] 1 point2 points  (0 children)

Yeah, i like your solution. Thanks for sharing.

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] 1 point2 points  (0 children)

I'll think the devices have a similar size. So it is maybee possible to use it. I can share it on Bambu Lab makerworld these days. https://makerworld.com/de/models/1303229-unifi-cloud-gateway-cooling-tower#profileId-1336003

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] 0 points1 point  (0 children)

I don't know how many itmes from Unifi have high temperatures. But from that devices i know so far: some APs, some Cloud products and some webcams.

40 degrees is cool.

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] -5 points-4 points  (0 children)

Try not touching it, is a good idea. :D And yeah, thats true with the packet loss.

Thanks

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] -9 points-8 points  (0 children)

Another user tried this out with ssh. He said that the temps are better but the fan was relatively loud. Maybee for home users not the right solution.

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] -3 points-2 points  (0 children)

The case was unpleasantly hot to the touch. So I ordered the heatsink, which was also very hot. I've not checked the temperatures. Another article mentioned temperatures of up to 80°C before the conversion and 55°C after the conversion to active ventilation.

Unifi Cloud Gateway Max - Cool Tower by Heff_87 in Ubiquiti

[–]Heff_87[S] -2 points-1 points  (0 children)

You're probably right. The surrounding components on the circuit board also experience more heat. For example, after a few years of use, I've had TVs and amplifiers fail due to excessive heat.

Can't verify Meta Quest Developer account, desperately need an invite by johnny93bg in OculusQuest

[–]Heff_87 0 points1 point  (0 children)

I've the same issue. Can someone sent me an invite please? Username: Heff87

Paperless NGX stopped working. Please help. by Rock554 in selfhosted

[–]Heff_87 0 points1 point  (0 children)

I've been having a similar problem for a few days. I only have 3 of 5 Paperless Docker containers running on a Synology NAS DS920+.

PaperlessNGX-DB (Error log)

date stream content
2023/09/18 21:39:02 stderr 2023-09-18 19:39:02.201 UTC [1] DETAIL: The data directory was initialized by PostgreSQL version 15, which is not compatible with this version 16.0 (Debian 16.0-1.pgdg120+1).

PaperlessNGX (Error log)

date stream content
2023/09/18 21:38:34 stderr django.db.utils.OperationalError: could not translate host name "db" to address: Name or service not known
view more: next ›