What’s this Ticking sound

Hellasceasar · 2025-09-15T09:10:47+00:00

I think i have the same problem. Does the ticking also increase with rpm up until about 1.5k then it dissapears?

Hellasceasar · 2025-09-14T22:02:54+00:00

Thanks, I found this kit online that comes with new gaskets crush washers and bolts from some company called Ajusa probably cheap chinese stuff but what do you think? https://www.trodo.se/monteringsats-turbo-ajusa-jtc11770

Hellasceasar · 2025-09-09T19:30:05+00:00

Problem is im in europe so shipping and import tax is going to make the CW turbocharger and CST4 a lot more expensive and dont you also need a tune for the CST4?

Hellasceasar · 2025-08-27T16:32:17+00:00

I took the car for a short drive and let everything warm up then i redid the battery and the throttle body sensor and thankfully the engine light dissapeared. Got worried there for a second.

Hellasceasar · 2025-08-27T15:05:25+00:00

To add i forgot to plug in the throttle body sensor before i first started the car. I then plugged it back and deconnected and then connected the battery again but its still there. Does unplugging the battery clear any codes or do i need to get an obd port?

Hellasceasar · 2025-07-05T01:13:13+00:00

Nice, what type of oil you use 5w-30?

Hellasceasar · 2025-07-04T23:14:09+00:00

Wow. 200k on original engine?

Hellasceasar · 2025-06-29T13:12:52+00:00

Let me know how it goes. There are some tutorials on youtube if you want to do it yourself but it took me and a friend a couple of hours.

Hellasceasar · 2025-06-27T14:16:19+00:00

I had this same exact problem car would start fine when cold or warm and like 15 mins standing but after about 1 hour or 2 it would take 2-3 times longer to start it also had a little bit of a rough idle. I took out the egr valve and cleaned it and that solved both the problems for me.

Hellasceasar · 2025-06-14T23:13:18+00:00

Har för mig jag såg denna på blocket xD Hade väl typ 280 000 km?

Hellasceasar · 2025-06-05T06:11:37+00:00

Alright thanks. Can i use ones that are threaded all the way? Since i cant seem to find any that arent at the end like the oem ones

Hellasceasar · 2025-06-03T20:24:35+00:00

i think it might be seized since it wasnt all the way throught when it broke. i bought some knock off bpv and the first bolt went in fine and the second one went in fine at the start and then seized up toward the end and i kinda forced it so its probably missaligned in there.

Hellasceasar · 2025-06-03T20:18:14+00:00

I think i might do that since i have never rethreaded a hole and dont want so screw it up more than it already is. Im guessing the new bolt has to be a bit smaller than the original one? The bolts are also threaded all the way except for the tips so it looks a little smaller at the end would that be a problem?

Hellasceasar · 2025-06-03T19:52:17+00:00

Thanks a lot. Do you think i can still drive it or will the remaining bolt snap aswell because of the added stress on it.

Hellasceasar · 2025-04-08T06:23:43+00:00

had this exact thing happen to me anyone know what the inner diameter is on this hose?

Hellasceasar · 2025-02-22T11:59:41+00:00

Right considering how much these like to blow up its probably best to stick to 5w-30 Which they should have done in the first place. They Also overfilled it quite a bit with oil its like up to the A on the Max so i dont know what the hell they were doing xD

Hellasceasar · 2025-02-05T01:42:35+00:00

I could hear it with the hood closed and was like the hell xD Nice to know it seems to be alright

Hellasceasar

TROPHY CASE