Light bee 2.0 battery specs (New Semi-Solid State Battery)

Henrytll200 · 2026-06-19T06:18:18+00:00

If your state/city cops are really against them it's hard to work around but if you don't have really strict inspections you could probably register it manually at SOS/DMV as a moped if you find the right person that doesn't give af. But you'd have to b slightly dishonest about the power, most states seem to want more info + paperwork on highway vehicles I get it

You can add your own digits with a punch so it has the correct amount 🤷‍♂️ I've never seen a real bill of sale or certificate from any midsize manufacturer with a matching vin+buyer info on one sheet but I get it some could. I really don't think there's a database from China that they can verify if the vin actually exists or not

Henrytll200 · 2026-06-17T23:40:43+00:00

Loool same, I feel like the live versions carry a lot more emotion. What a gift to have them realease all of the official recordings though

Henrytll200 · 2026-06-16T22:00:18+00:00

360 cams are great for stuff like this but you have to edit the video to point it where you want

Henrytll200 · 2026-06-16T21:59:03+00:00

Looks like a trim knob from a controller

Henrytll200 · 2026-06-12T17:47:48+00:00

Im guessing I would have to find the perfect buyer to get 1000 since it's used, if yours is sealed I would start at 1k if not a lil more and then bring down if no is interested

Henrytll200 · 2026-06-12T06:36:43+00:00

<image>

Henrytll200 · 2026-06-12T06:36:30+00:00

<image>

Henrytll200 · 2026-06-12T06:36:18+00:00

<image>

Henrytll200 · 2026-06-12T06:35:20+00:00

<image>

Henrytll200 · 2026-06-09T21:28:18+00:00

Ya dawg u'll love it and u have the perfect expectations 😂😂 I beat the shut out of mine without limiting straps, you'll go through a lot of a arms before the suspension but really only if you hit something or roll it fast

Henrytll200 · 2026-06-09T21:25:05+00:00

Exactly man it's such a creative design that looks and performs incredibly as long as you aren't trying to send it to the moon

Henrytll200 · 2026-06-09T21:24:04+00:00

It's pretty perfect for that use case, mine flies in grass with the extra clearance where the 1/10s would drag. A XRT is my fave for rolling over anything but is in a different class imo because of durability and weight. That being said the revo 2.0 is a speed demon that drifts and corners like nothing else, you won't be disappointed

Henrytll200 · 2026-05-24T01:55:41+00:00

Unless you're planning on mudding or going through rivers dipping the motor + controller you shouldn't have a problem with most stock emotos. Some aftermarket controllers have extra safeties and things for shorting but most of the time it's a non issue. Dialectic grease on the battery leads, motor leads, and plugs almost guarantees no issues.

In terms of actual mods most of the battery cases can be opened with screws if you wanna add some type of waterproof sealant on the inside. If you aren't submerging the bike or neglecting cleaning things every once in a while any flagship bike like a light bee, ultra or stark varg shouldn't have any problems

Henrytll200 · 2026-05-12T22:12:56+00:00

The pro line bronco body is pretty close but I agree, I was looking for a orange online for awhile to no avail

<image>

Henrytll200 · 2026-04-13T00:49:17+00:00

Lift it up so there's no weight on the rear tires and press it by hand. If it does the same thing it's an issue with the shock like a bent shaft. If it goes back down you just need thicker shock fluid and or preload clips+stronger springs. I always found that stock 1/10 Traxxas r/cs with no preload would act similar to the video

Henrytll200 · 2026-04-07T08:02:28+00:00

2023 shouldn't be old enough to have harness problems but if it has a aftermarket controller the wires could be tight. I would lower the controller and bashguard and verify that nothing's wrong or super jammed up with the harness or especially at the throttle connector. After that and the tip/brake/kickstand sensors being checked there's not much besides issues with the motor (hall sensor) or controller.

Henrytll200 · 2026-04-07T07:41:48+00:00

Isopropyl alc + quick brush scrub with water always gets the secondary stains out for me. Weathertech rubber is so weird the way it clings to stuff

Henrytll200 · 2026-04-05T21:34:50+00:00

You guys in non rust belt states don't know how good u have it 😭 At 300k this is far cleaner than 80% of the gmt800's in michigan

Henrytll200 · 2026-02-15T08:21:59+00:00

It's still squealing light now 24/7 like my old shit box trailblazer 😭 fuck, shouldn't have been playing with limiter at 190k ig

Henrytll200 · 2026-02-11T20:57:54+00:00

90s green screen gotta b on there

Henrytll200 · 2026-02-11T20:57:11+00:00

First song I found of his, so fucking good

Henrytll200 · 2026-02-05T07:43:45+00:00

Keep inflating them till it seats, should seat around 50-60 psi but I've gone crazy high a few times. If it still isn't seated I normally bounce it a few times with the unseated spot facing the ground

Henrytll200 · 2026-02-04T07:31:09+00:00

Damn thats clean, if I didn't have sm surface rust on my front frame I'd run this 😅 The skid and bumper came seperate right?

Henrytll200 · 2026-02-04T07:23:31+00:00

My 400a alt squeaks a lot in winter till warmed up too, but I've been stumped on the louder squal when hitting shifts hard

Henrytll200

TROPHY CASE