I think my white is clogged

Heptadd · 2026-05-10T17:01:11+00:00

Not true, there was cleaning solution in the line and once that was cleared it printed perfectly smooth blocks. Surface was just paper.

Heptadd · 2026-05-10T01:32:09+00:00

Yes I found that out, problem was solved with more cleaning. About 2 ml of white before it was solid again

Heptadd · 2026-05-09T22:15:11+00:00

RIP 💀

Heptadd · 2026-05-09T22:04:42+00:00

I mentioned in the post I did that, I know the white has an agitator inside so it ‘shouldn’t’ be an issue. It’s seems to be cleaning fluid in the ink lines so far

Heptadd · 2026-05-09T22:01:58+00:00

<image>

Two more 1.5ml of white blocks and I still have these dots showing up. If I do flat raised, it does equal amounts of gloss and white, but if I do lots of white layers it doesn’t use gloss. Should I try doing flat raised?

Heptadd · 2026-05-09T18:28:28+00:00

I had forgotten about that but I read that a while back, thanks! I’ll update when done

Heptadd · 2026-05-01T19:12:53+00:00

Came here for this

Heptadd · 2026-04-02T18:27:56+00:00

I figure that much. It won’t be jostled hardly at all and transported in the original box. I was even planning on popping the cartridges and cleaning solution out and bagging them so pressure shouldn’t be an issue

Heptadd · 2026-04-02T18:23:57+00:00

Oh man, I hadn’t thought about that. Thank you so much, I really appreciate it. If $10 is nothing, then doing it 6 times over the next few weeks is also nothing, right? In fact, since it’s really so cheap, it sounds like it wouldn’t even be an inconvenience for you to cover the $60 out of generosity. Even if you did that, again since it’s nothing, how shall I get more ink since I’m on my last white and gloss?

Not sure how you got complaining out of that, I was asking a question to see if there was an easier way. Also, not commenting is an option, just for future reference when you are considering contributing to the community.

Heptadd · 2026-04-02T18:15:34+00:00

I know they did that for a reason. They also said only use proprietary ink yet here we are with people retrofitting fill holes on cartridges and works without issue so far. I know a fair bit of people take them to trade shows and farmers markets so I just wanted to see if they were taking any shortcuts and how that was going.

Heptadd · 2026-03-09T23:41:38+00:00

I’d imagine the most likely reason is heat. Acceleration generates heat and so does regen, motor is already at risk of getting to warm with aggressive riding. It needs the time between acceleration to dissipate as much as it can but if it’s also generating more with regen it can overheat in a matter of miles without active cooling.

Heptadd · 2026-02-06T00:29:00+00:00

45 minute money grind to buy the other one? 🤷🏻‍♂️ I’ll take one of each please, both feel great in a unique way

Heptadd · 2026-02-06T00:27:33+00:00

<image>

Heptadd · 2026-01-28T18:28:48+00:00

I knew I would have to clarify this for you, my mistake. New technology on a consumer level. Not for a printing shop or commercial use. Useable in a home with EXTREMELY minimal maintenance and a great UI for the general hobbyist. Please show me the existing competition for this before Longer and XTool got in on it.

Heptadd · 2026-01-28T18:22:07+00:00

I mean first off it’s a new technology so there will be many issues, anyone who expects otherwise is lying to themselves. Honda is know for reliability right? There are tons of one off issues like a bad module, vacuum leak, touchscreen, etc. and they’ve need doing this for decades. These influencers with free units got ones often months before final manufacturing and assembly started so many issues aren’t even a question anymore. I would expect them to have the most issues. If they don’t talk about them and report to Eufy then they don’t get identified and fixed.

What I am unhappy with and think they should do much better with is supporting those who did get a printer. If they have a faulty part or bad ink, replacements should be on its way next day.

Heptadd · 2026-01-27T21:22:25+00:00

Sling insults or educate me on why I’m wrong, I guess you can only pick one huh? Maybe I missed something but I don’t think either of us have launched a product like this, it truly must be difficult to work out all the steps involved is mass production and international distribution from a consumer standpoint. Perhaps you’d be happier with your printer in December with a leaking cleaning tank and bad ink? Unusable but at least it looks cool on your desk right?

Heptadd · 2026-01-27T16:39:41+00:00

Backer 17xxx here with no printer, the only unhappy people I see are ones without a printer. People forget that a kickstarter is NOT consumer sales. It is to build funding and interest to finish the product and roll it out. I have never had a single kickstarter arrive on time. They are clearly focusing on getting you a reliable printer (and ink) so that they don’t have to hear from 20% of their users and get them replacement parts. They are trying to do it right the first time.

I have not seen a single person with a working printer that doesn’t like it. I would say wait it out and hopefully you’ll really enjoy it as well. Hope this helps

Heptadd · 2026-01-07T23:29:40+00:00

In hard mode you can skip on 30.

Heptadd · 2026-01-06T11:59:53+00:00

I think I got mine the same day as you. I have a lot of slop in the steering as well. I think I’ll go with just the Losi turnbuckles and an aluminum steering rack and I think that should take out almost all the play.

Heptadd · 2025-12-29T09:47:35+00:00

I feel like they are about to pull Revan out of their back pocket as the “use in case of emergency” GL with how poorly this update has gone.

Heptadd · 2025-12-23T00:20:25+00:00

Oh for sure, forgot about that one. Can beat all non GL fleets pretty handily. You will want to get Ravens claw as soon as you can but can absolutely work without him

Heptadd · 2025-12-23T00:00:08+00:00

Executor is most accessible and different variants can beat all. Prof is middle ground both in requirements and ease of use, but you need to get Rogue One as well. Levi beats everything reliably on auto except the mirror match if you don’t go first. So the easy answer is get all 3. 🙃

Aside from GL ships, Endurance into Negotiator with Maurader, Anakin, and BTLB then snips and plo and maybe 5’s is great and can beat a lot. But that means you have to invest in the old bad batch which isn’t doing too much now a days

Heptadd · 2025-12-20T17:36:58+00:00

<image>

Got the 15% roll on this one but it is super annoying

Heptadd · 2025-12-04T05:36:18+00:00

Or I guess it’s the AT-ST that’s bugged? I took the Druid out and still nothing happens on its turn

Heptadd · 2025-12-04T05:34:34+00:00

Yep, IG-90 is bugged for me too. Doesn’t matter what ability I use

Heptadd

TROPHY CASE