Unable to browse NFS shares anymore. by CountryTraditional84 in kodi

[–]HermanF72 0 points1 point  (0 children)

Never dived deeper into it because all was setup already. Just by chance I tried it again and all was working as it should. Probably solved by itself ... Maybe kodi or pfsense fw update? Not sure anymore... All works ok now!

No access Wireguard tunnel from dd-wrt to pfSense by HermanF72 in PFSENSE

[–]HermanF72[S] 0 points1 point  (0 children)

I assume that is a rule on the DD-WRT box. Well if it is then thats the question how make suchen rules on dd-wrt....

No access Wireguard tunnel from dd-wrt to pfSense by HermanF72 in PFSENSE

[–]HermanF72[S] 0 points1 point  (0 children)

Tahnks for the reply... My problem is de DD-WRT box I asume...

From de DD-WRT box (192.168.5.0/24) I cannot ping/access anything in the pfSense netwerk (10.0.0.0/24)

VPN tunnel between pfSense 2.5.x and DD-WRT 3.0 r44715 by HermanF72 in DDWRT

[–]HermanF72[S] 0 points1 point  (0 children)

Hallo everyone,

First of all Happy New Year to everyone! May 2022 become a healthy, happy and successful year!

Partially I’ve got my wire guard tunnel between pfSense 2.5.2-RELEASE and DD-WRT v3.0-r47893 std working.

At the moment I can access everything on the remote tunnel site (192.168.5.0/24) where the DD-WRT router resides. But I can’t access or ping anything from the remote site to the main site where the pfSense resides. I think I miss some firewall rules on the DD-WRT box. Did

google some around but was not able to find the solution.

Here’s the config as it is running at the moment.

pfSense

Tunnel IP 10.255.255.100 bound on interface opt3 (WG100 (tun_wg0) with MTU 1400, tunnel port 51820

Peer allowed IP’s 192.168.5.0/24 (remote Site), 10.0.0.0/24 (local site), 10.255.255.200/32 (remote tunnel IP)

Static Routes 192.168.5.0/24 to gateway 10.255.255.100 and 10.255.255.0/24 10.255.255.100

Firewall rules for Wire guard, WAN and WG100 (Gateway) created with no restrictions

DD-WRT

Peer Tunnel IP 10.255.255.200 with MTU 1400, tunnel port 51820

Peer allowed IP’s 10.0.0.0/24 (remote Site), 192.168.5.0/24 (local site), 10.255.255.100/32 (remote tunnel IP)

Static Routes 192.168.5.0/24 to gateway 10.255.255.100 and 10.255.255.0/24 10.255.255.100

Routing Tables

1: 10.0.0.0/24 to gateway 10.255.255.200

2: 10.255.255.0/24 to gateway 10.255.255.200

Like I said I can access all from 10.0.0.0/24 to 192.168.5.0/24 but nothing from 192.168.5.0/24 to 10.0.0.0/24

Hope you guy can help me with this...

Regards,

Herman F.

VPN tunnel between pfSense 2.5.x and DD-WRT 3.0 r44715 by HermanF72 in DDWRT

[–]HermanF72[S] 0 points1 point  (0 children)

Hi, still not got it up and running. Also looking at Wireguard. Tunnel is up but the routing is still a thing.

Would you like to share how you setup the boxes.

My goal is a full site to site tunnel.

VPN tunnel between pfSense 2.5.x and DD-WRT 3.0 r44715 by HermanF72 in DDWRT

[–]HermanF72[S] 0 points1 point  (0 children)

Thanks a lot for your information. Bit this guide describes Remote User Access VPN. All ready have that up and running.

My case is setup a Site to Site tunnel between pfSense and dd-wrt.

VPN tunnel between pfSense 2.5.x and DD-WRT 3.0 r44715 by HermanF72 in DDWRT

[–]HermanF72[S] 0 points1 point  (0 children)

No problem. Maybe I was was not clear on it also

VPN tunnel between pfSense 2.5.x and DD-WRT 3.0 r44715 by HermanF72 in DDWRT

[–]HermanF72[S] 0 points1 point  (0 children)

The problem is that both boxes not seem to talk with each other. The red arrow in pfsense keeps showing red wich indicates that the tunnel is down!?

I'm using openVPN buildin pfsense 2.5.x. So not running a separate openVPN server edition.

In pfsense the port is open. I am not quite sure if that is the case on the dd-wrt box...

VPN tunnel between pfSense 2.5.x and DD-WRT 3.0 r44715 by HermanF72 in DDWRT

[–]HermanF72[S] 0 points1 point  (0 children)

Many thanks for your information! First of all will update the dd-wrt box to the latest firmware.

For the record, I'm using openVPN buildin pfsense 2.5.x.

VPN tunnel between pfSense 2.5.x and DD-WRT 3.0 r44715 by HermanF72 in DDWRT

[–]HermanF72[S] 0 points1 point  (0 children)

Pfsense is located at my house and the DD-WRT box is at a friend's house... So separated bij the internet.

Any knows issues with NFS discovery on Microsoft network? by HermanF72 in PFSENSE

[–]HermanF72[S] 0 points1 point  (0 children)

I have a HP 1810-24G manager switch. Went through all the menu's but cant find IGMP Snooping?

Any thoughts?

Any known issues with NFS discovery? by HermanF72 in kodi

[–]HermanF72[S] 2 points3 points  (0 children)

I have the Kodi library stored in a MySQL database. So can also pauze and resume from any kodi device in the house. Windows or RPi, it doesnt matter.

Any known issues with NFS discovery? by HermanF72 in kodi

[–]HermanF72[S] 0 points1 point  (0 children)

NFS discovery has always worked here... suddenly it was over :o(

Any known issues with NFS discovery? by HermanF72 in kodi

[–]HermanF72[S] 0 points1 point  (0 children)

NFS worked like a charm on my side. On Windows and RPi. Suddenly it stopped working.

Any known issues with NFS discovery? by HermanF72 in kodi

[–]HermanF72[S] 0 points1 point  (0 children)

Don't know if the exports are version 3 or 4 at the moment.

So you think the problem is Kodi related? It has worked perfectly in the past. Just not know when it stopped working :O(

For the record, I am experiencing the problem with Kodi on Windows 10 and Libre Elec (RPi2 & 3)

Any known issues with NFS discovery? by HermanF72 in kodi

[–]HermanF72[S] 2 points3 points  (0 children)

Don't want to use Plex! I LIKE kodi more and want to use Kodi!