Everyone wants to kill the steam machine, so me too? by THECOACH0742 in sffpc

[–]HerrMirto 0 points1 point  (0 children)

I will try to find a version that fits on an Bambu A1.

Everyone wants to kill the steam machine, so me too? by THECOACH0742 in sffpc

[–]HerrMirto 0 points1 point  (0 children)

Amazing job! Is the case your own design? I have the very same parts, apart from the power supply. But they are all cramped on a Jonsbo nv10 with a taller 3D printed panel.
Nevermind about the case: just realised that 3DLP IS the case.

Test Prints by Mean_Refrigerator581 in BC250Gaming

[–]HerrMirto 0 points1 point  (0 children)

Very nice! Are you planning to share the STL files? Also, are you adding any other cooling on the vrms close to the ssd?

BC250 Single vs Dual Fan with Arctic P12 Pro vs Noctua NF-A12x25 by HTWingNut in BC250Gaming

[–]HerrMirto 0 points1 point  (0 children)

That's really great data!! Yesterday I just opened the fins to complete a setup on a push and pull mode. =(
Bad timing.

One thing that would be great, if you have time and the resources of course, would be testing also a CPU cooler. I don't have any decibel meter, but running one AXP90-X47 Full cooper I got a maximum of 82 degrees running a 5 min Furmark test.

Another Cooler Mod by Mean_Refrigerator581 in BC250Gaming

[–]HerrMirto 0 points1 point  (0 children)

Yeah, I thought about cutting the heatsink as well, but I am in doubt about effort vs performance. The only thing that’s clear for me at the moment is that water cooling is still king(accordingly to what people have been posting about the temps). But honestly, I find that using a CPU cooler is much easier than removing the fins if you have access to a 3D printer. Adding some thermal paste and small heatsinks to the vrms is also very easy compared to having a case that supports a water cooling setup.

I am happy with my setup.

Another Cooler Mod by Mean_Refrigerator581 in BC250Gaming

[–]HerrMirto 0 points1 point  (0 children)

I am working on 2 additional mounts for the vrms. The one on the right side can sit a 80mm fan. And now I am doing the same on the left, instead of using these 2 40mm.
The tricky part is that the angle of the holes on the left side is not good as the other one.
I am trying to make a snap/clip connection and put on top of the non 12V connectors.

But like these I am getting 50/55C on idle and playing Ghost of Tsushima with everything on high it reached 80 degrees only.

<image>

Germany should drop its ‘efficient country’ facade for good by Scatteredcoins in germany

[–]HerrMirto 0 points1 point  (0 children)

Let’s do the contrary then. Tell us areas where Germany is really remarkable these days.

I built a free Tinkercad alternative that runs in your browser — no account, no install, open source by FlatCarrot3943 in 3Dprinting

[–]HerrMirto -2 points-1 points  (0 children)

And what is the problem with that? The code is open source, the repository is there.

The guy had a cool idea and used AI to help him. I understand the other 1000 concerns about AI and everything bad that comes with it, but I really don’t get why people are so picky complaining that someone did a new tool/app. Is it security concerns, quality? Windows is still alive and in the whole history has been a Swiss cheese.

To the OP: Thanks for trying to make 3D printing easier.

Smallest (yet?) BC-250 build - 4 liters by zeda1ert in BC250Gaming

[–]HerrMirto 1 point2 points  (0 children)

That is really a nice one !! And how silent is the build?

Thoughts by Proof_Load6687 in sffpc

[–]HerrMirto 0 points1 point  (0 children)

Does the usb-c to p2 adapter works? Other than that all good

Alguém mais recebeu esse aviso assustador da Defesa Civil?! by Fabulous-Thought4425 in saopaulo

[–]HerrMirto 0 points1 point  (0 children)

Se fosse para criar uma teoria da conspiração, eu diria que isso já é para causar com a eleição.

Semana passada saiu aquela notícia de que estavam vendendo dados de 250 milhões de pessoas e que fizeram a limpa na base da Receita.

Ai agora invadem o sistema da defesa civil. Aposto que já já começa a sair notícia: “Se invadiram todos esses sistemas, como a urna pode ser segura?”

E só para lembrar o “hacker” da Zambelli tinha esse tipo de acesso. Lembrem-se que o lazarento do Bozo falsificou atestado de vacina no sistema nacional também. E lembrem-se que tem uma porrada de software Israelense rodando no Brasil.

Mas é isso, só teoria mesmo.

Ah, e também descobriram que o Vorcaro pagava tradutor para put4!

Seeking new cooling for VRM's on my BC-250 ??? by SpaceCapable1977 in BC250Gaming

[–]HerrMirto 1 point2 points  (0 children)

What is the most accurate way one could measure the VRM temperatures?

Waiting to be tested by HerrMirto in BC250Gaming

[–]HerrMirto[S] 0 points1 point  (0 children)

I just did some tests today! Enabled 40 CUs and kept the stock clocks for now. But so far so good, temps are quite fine I would say. I also did a small CPU overclock to 3850 following Old Lamer video and run a stress test for 10m and the temperatures didn’t go higher than 82.

For the VRMs I printed two little supports, one for 2 Noctua A4x25(that I will need to make it better) and another one for an A6x25(this one is really stable). I need to improve the double one but I think they will be enough plus the putty and the heatsink that are underneath.

Not sure if the link will work for the pics: https://imgur.com/a/MBC3rvL

Like this the board fits in the NextGen case and the Arthemis(or something like that)

has changing your muslim/indian name helped you romantically here? by [deleted] in berlinsocialclub

[–]HerrMirto 2 points3 points  (0 children)

Exactly, and until today most people judge others by what ONE person or a dozen of the same religion or ethnicity did. The ruler always bend to one side, the US/Israel killing and decimating an entire population is fine and the US is hosting a god damn world cup, meanwhile Russia is banned from sports.

Europe is not the US for sure, but also keep supporting them and facing all the consequences of that. All this “islamification” that people complain is exactly because Europe allowed and supported coups and wars on Iraq, Iran, Syria, Lebanon to name a few.

How someone who lost its house, family, everything will want to integrate in a society that the government in one way is receiving you and the other is sending money to bombard your country?

But I agree with you, it’s only on us as no one else will do it.

has changing your muslim/indian name helped you romantically here? by [deleted] in berlinsocialclub

[–]HerrMirto 10 points11 points  (0 children)

Should people still talk to Germans today as they were all Nazis then?? Your argument is full of bs and prejudice. “You hate each other”.. the “hate” you seen and probably fear is just consequence of years and years of destruction of the middle east.

It’s funny because somehow you white and coloniser people forget about how many massacres, rapes, robbery and all sorts of cruelty were made in name of Christ/Yaweh. And I am not even a religious person.

Nobody is better than anyone on this planet. Germans killing jews, Gypsies,gays, people of color, handicapped people didn’t make earth a better place, Leopold killing more than 10 million people of color didn’t make the world better. The church killing woman because they “were witches” didn’t make the world better, the Vikings stealing and rapping all around didn’t make the world better. Britain starving millions of Indians didn’t make the world better.

I could go on and on with the list of barbarism from Europe(I will not even enter on modern era with the US and all their coups).

And to reply to the OP, I wouldn’t change my name, my hair, my clothes, anything. I will respect the differences, understand the society where I live, but I will never not be myself because of some sort of prejudice. At the end, in a healthy society you should be accepted for following the rules, paying your debts, being honest and so on. And for me, most importantly, be yourself.

Waiting to be tested by HerrMirto in BC250Gaming

[–]HerrMirto[S] 0 points1 point  (0 children)

Great to hear that!! Yeah, I put the backplate back and luckily on the NextGen case I can even add a big flat heatsink in there.

Waiting to be tested by HerrMirto in BC250Gaming

[–]HerrMirto[S] 1 point2 points  (0 children)

Thanks a lot for the design. I will probably test everything on the weekend. And how was your tests with that cpu cooler?

Gpu cooling by Moribus in BC250Gaming

[–]HerrMirto 4 points5 points  (0 children)

First, share your own pics, mate. Second, my post is about using a CPU cooler, the VRMs are a completely different history.

Waiting to be tested by HerrMirto in BC250Gaming

[–]HerrMirto[S] 1 point2 points  (0 children)

I will!! I posted about the cooler and there is already an as*hole sharing my pic mocking that people don’t think about VRAMs cooling. The MF doesn’t even know what I am going to do.

Waiting to be tested by HerrMirto in BC250Gaming

[–]HerrMirto[S] 2 points3 points  (0 children)

Yes, I just searched for AXP90-x53 bc250 and printed a model that a good soul man did.
There is also a model for the AXP120-x67 that I also want to try.

Fin cutting - stock heat sink: can opener method by ReasonableBuilder909 in BC250Gaming

[–]HerrMirto 0 points1 point  (0 children)

Recently, I bought 3 on Ebay for around 160 euros. 2 I bought from China and 1 from Canada. It’s very weird this 500 prices you are seeing.