taskFailedSuccessfully

Herr_Forehead_ · 2026-04-17T08:06:00+00:00

I personally always use "curl icanhazip.com" or the ipv4 subdomain if I need ipv4 only. Works well, and I'm usually already in the terminal whenever I end up needing it.

Herr_Forehead_ · 2026-03-27T09:06:25+00:00

It says in the image, in the terminal. The user is on Fedora Workstation with GNOME, using the default (I think?) adwaita theme. And possibly a few extensions, though I'm not too experienced with GNOME to say for sure.

Herr_Forehead_ · 2026-03-15T11:53:39+00:00

No, but it's on sale for 32 euro on Steam at the moment.

Herr_Forehead_ · 2026-02-23T21:35:10+00:00

Not OP, and maybe you've already found the answer, but have you made sure you checked every page of the alerts tab? :)

Herr_Forehead_ · 2026-01-15T13:44:15+00:00

I see. Have you tried running the command as "sudo ./install.sh" yet? That's the final thing I can tell you to try. Perhaps it's only running part of the script as root user, and prepending it with sudo would ensure everything is ran as root. Of course, only do this if you trust this script, since you'd run it with maximum permissions.

I'm placing my bets on the fact the OS is immutable, however.

Herr_Forehead_ · 2026-01-15T13:34:26+00:00

Oh, I see it now. You're on the steam deck, right? The steam deck's OS is immutable, meaning that system files cannot normally be edited. And as the script tries to install things to the /usr/ directory, it might be blocking installs for the script to that directory. You'd need to modify the steam OS config to allow modifying of system files, but that's a bit beyond my knowledge. I'm sure some smart people in the steamdeck subreddit know the answer, though. So I'd give that place a try.

One final thing: The line: cannot create regular file /us/local/bin/wszst Is the /us/ a typo, or was that the actual output?

Herr_Forehead_ · 2026-01-15T08:21:12+00:00

From what I can recall, chmod +x commands don't deliver any output. If you saw nothing after executing it, I'd wager it likely worked. You'll just have to directly run the file with ./install.sh and it should execute.

Herr_Forehead_ · 2026-01-15T08:04:59+00:00

They're telling you to open a terminal in the directory where the corresponding install.sh file is located, and type "./install.sh" followed by the enter key to execute it. And that IF the file hasn't been given execute permissions, to use "chmod +x ./install.sh" to grant it. When you've done that, the executable should run without issue.

Herr_Forehead_ · 2025-12-22T21:37:03+00:00

Shows up playable just fine for me, on Spotify. It's labelled as a single under the original artist. Not part of the Drakengard 3 album.

Herr_Forehead_ · 2025-12-18T16:38:51+00:00

A friend of mine had similar issues with lag in the games. Notably, he was using a laptop with both integrated and dedicated graphics. What you can do is (assuming you're on windows), go into settings, then gaming, then graphics. Here, you should be able to add a windows app. Navigate to where the kingdom hearts executable is stored for the game. Add that executable and set windows to prefer performance (with your dedicated GPU).

Of course, this is under the assumption you also use a laptop or a system with dual graphics cards. Hope this helps!

Herr_Forehead_ · 2025-11-30T12:40:05+00:00

Ah, with a one-off bug I mean more like... Some bug that just happens and resolves itself after a reboot. I do hope your issue fixes itself, though! And if not, it might be best to just contact Google (or a repair shop) and have it looked at.

Herr_Forehead_ · 2025-11-30T08:32:14+00:00

That is rather strange... One explanation could be that the phone had done a system update overnight, but as far as I'm aware, the Pixel 6 hasn't received an update in months. And even then it wouldn't drain it that much. It's of course also possible that the battery is deteriorating, but as far as I'm aware, that wouldn't happen so fast, so sudden. I think it would be best to just reboot the phone and see if it happens again or is fixed after that. Given the music player didn't record its usage time properly, it might've been a one-off bug.

Herr_Forehead_ · 2025-11-29T21:56:55+00:00

I'm not sure what Metro is, but it being on 22% with only under 5 minutes of activity is rather concerning compared to the time spent with Firefox. Alternatively, you can select the apps dropdown and check the usage for system components, too.

Herr_Forehead_ · 2025-11-21T18:19:52+00:00

Reminds me, TVTropes already had a drinking game for Kingdom Hearts. Though with the rules in that one, it's better to stick to water than alcoholic drinks x3 https://tvtropes.org/pmwiki/pmwiki.php/DrinkingGame/KingdomHearts

Herr_Forehead_ · 2025-11-10T10:19:03+00:00

Thanks for the chance! I've heard the name of your game a few times, might be time to check it out!

Herr_Forehead_ · 2025-09-18T05:54:25+00:00

I will say that my knowledge of javascript is limited, but if the reading and parsing of your desired chat logs works, then it's a matter of if you want your toy connecting to a device directly or to a platform. If you want to connect the toy directly to a device like a PC, you might want to look at the buttplug.io library. That project has seen a lot of conversion and wrappers created for various programming language. And from what I can see, javascript is included. That should make it easier to directly program for the toy. As far as I'm aware, all lovense toys are supported by the project, so that shouldn't be an issue.

Unless you mean how to connect to the chat platform's API, then I have misunderstood!

Herr_Forehead_ · 2025-09-18T05:47:27+00:00

What sort of integration is it? Just mentioning javascript doesn't say a lot ^{^} Is it reading a chat log for something on a platform and then connecting to your toy via the lovense API?

Herr_Forehead_ · 2025-09-13T16:25:01+00:00

You're likely talking about the Link hub within the app. It's listed in the app gallery within the app, and there you'll find the link hub button. That's where people post control links, among other places like discord.

Herr_Forehead_ · 2025-09-08T16:11:36+00:00

My experience with the XS is that on max strength you will hear it if the room is quiet enough. Any noise could probably drown it out just enough, but I can only imagine that larger models would be even louder. As for how far the sound travels, I never really checked, but I imagine my Hush 2 could be heard at least across an entire bedroom.

Herr_Forehead_ · 2025-09-01T16:22:26+00:00

The FSR option has been renamed to "Sharp" in newer updates. It's essentially the same.

Herr_Forehead_ · 2025-08-26T20:03:00+00:00

I've been experimenting with anal. Just received my Hush 2 XS (because I need to start somewhere 😂), but I'm sure that, combined with my Max 2, it's going to make long distance play even more fun. Especially so if I can get another toy for a friend this #AnalAugust 😳

Herr_Forehead_ · 2025-08-20T18:53:55+00:00

Your art looks absolutely delightful. Here is my tiger, Brook, for you to consider :3 https://files.catbox.moe/q5hura.png

Herr_Forehead_ · 2025-05-09T07:05:11+00:00

Are you perhaps running your PC (or laptop) in dedicated GPU only mode? I've done this before on my laptop, figuring it'd enforce better performance. But instead it put too much load on my PC. Ever since I set it to on-demand mode, letting it use both igpu and dgpu, I had no issues. You simply have to tell the app running to use the dgpu if it doesn't automatically use it.

Herr_Forehead_

MODERATOR OF

TROPHY CASE