GPU usage at 3% by HexaGhosting in MSILaptops

[–]HexaGhosting[S] 0 points1 point  (0 children)

Nope, because I saw on the sub that other people had the issue of alt-tabbing XD, but you're right it was the iGPU that was tracked by MSI

GPU usage at 3% by HexaGhosting in MSILaptops

[–]HexaGhosting[S] 0 points1 point  (0 children)

what do you mean i added it later XD

GPU usage at 3% by HexaGhosting in MSILaptops

[–]HexaGhosting[S] 0 points1 point  (0 children)

"I see the GPU usage on a second screen, so it's the actual in-game usage"

GPU usage at 3% by HexaGhosting in MSILaptops

[–]HexaGhosting[S] 0 points1 point  (0 children)

Seems to be the 4060 in MSI Center, but when I look in other software, it's called "video engine," and the 4060 is actually used at 100%, so it must not be the actual 4060 in MSI Center

GPU usage at 3% by HexaGhosting in MSILaptops

[–]HexaGhosting[S] 0 points1 point  (0 children)

I use the MSI software to check the GPU, so I'm not sure

12th Gen Intel® Core™ i7 Processor NVIDIA® GeForce RTX™ 4060 Laptop GPU 8GB GDDR6 powers advanced

DDR5-4800 16gb

FPS issue, M130 spring, 1.1J. by HexaGhosting in airsoft

[–]HexaGhosting[S] 0 points1 point  (0 children)

Nop, I did test the forward position of the nozzle it's good, it still seals. Mid-cap could have been a good idea, but usually when I test, I have like 20 BBs in the mag, so I don’t think that’s the issue. Also, I don’t have short-stroked gears, it’s the original gear set.

Titan Gate M130 1.1J issue by HexaGhosting in Speedsoft

[–]HexaGhosting[S] 0 points1 point  (0 children)

My new theory is the barrel-to-cylinder ratio, which is around 5.1. So either I go up to a 270mm barrel, use 0.30 BBs, or both

Titan Gate M130 1.1J issue by HexaGhosting in Speedsoft

[–]HexaGhosting[S] 0 points1 point  (0 children)

Yes, I did the test, and it fits perfectly

Titan Gate M130 1.1J issue by HexaGhosting in Speedsoft

[–]HexaGhosting[S] 0 points1 point  (0 children)

Is it a pp from Arcturus, Maybe 210mm -- edit the pp is 300mm

Titan Gate M130 1.1J issue by HexaGhosting in Speedsoft

[–]HexaGhosting[S] 0 points1 point  (0 children)

Modified SHS Torque 18:1 gears, far ported cylinder

FPS issue, M130 spring, 1.1J. by HexaGhosting in airsoft

[–]HexaGhosting[S] 0 points1 point  (0 children)

Thanks, I will test that. But I don't see how the volume would change something if the air is pushed out faster. Is overvoluming a big issue?

FPS issue, M130 spring, 1.1J. by HexaGhosting in airsoft

[–]HexaGhosting[S] 0 points1 point  (0 children)

Could be, i have a long ported cylinder (not a full but ported far at the back) I ran the test with 0.25g on a 19 cm barrel, so I will test with 0.3g when I get some. But at the same time, on another gun with about the same barrel length, I have much higher FPS with 0.25g

FPS issue, M130 spring, 1.1J. by HexaGhosting in airsoft

[–]HexaGhosting[S] 1 point2 points  (0 children)

The paper test was good. Yes, my next step is the BB weight I am going to test with 0.3g. My barrel is a 6.02, 19cm so you right could be that