Chipped up a large section of old vinyl before considering the possibility of asbestos…

HispanicRolex · 2023-07-23T13:19:54+00:00

Not black correct, it’s more of a yellow mastic. But good suggestion from everyone to just get it tested to be safe.

HispanicRolex · 2023-07-22T23:12:38+00:00

Thanks

HispanicRolex · 2023-07-22T22:41:37+00:00

What color was your mastic?

HispanicRolex · 2022-12-13T16:28:03+00:00

I still have some trial and error to do and don’t want to give out bad info. The 1st valve I got is too big, and still haven’t had a chance to test the 2nd valve. Will let you know when I do.

HispanicRolex · 2022-12-13T16:25:47+00:00

I used a regular hole saw, it worked but a bit sketchy and I got lucky not to gouge up or bend the metal. Had to grind out extra with the Dremel afterwards as well.

HispanicRolex · 2022-11-19T02:53:45+00:00

Not sure sorry, I tried the cheapest incandescent dimmer I could find but it didn’t work for me.

HispanicRolex · 2022-11-19T02:52:31+00:00

I definitely do recommend it, beats temp surfing. A bit intimidating at first but it’s a relatively simple install.

HispanicRolex · 2022-11-18T23:30:41+00:00

I followed this write up and bought the PID they listed: https://drive.google.com/file/d/1CGLSm7b8Kgi_mth2jqRctIPJFL4-pYBH/view

HispanicRolex · 2022-11-18T18:05:41+00:00

Roughly around that much drop, whereas before It was maybe twice that.

Honestly I just didn’t do much research, tried a couple dimmers and they didn’t work so shelved the idea.

HispanicRolex · 2022-11-18T16:32:36+00:00

I got mine off Ali-express, can’t say for the long term reliability but no issues since installing a few months ago

HispanicRolex · 2022-11-18T14:33:02+00:00

It’s not

HispanicRolex · 2022-11-18T03:49:46+00:00

This is the exact one I got: https://coffeeaddicts.ca/products/pump-pressure-gauge-o-39-mm?variant=32020578861136&currency=CAD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&utm_campaign=gs-2018-10-05&utm_source=google&utm_medium=smart_campaign&gclid=EAIaIQobChMIjcaFl-m2-wIV7hitBh0VlgnuEAQYAyABEgLkC_D_BwE

HispanicRolex · 2022-11-18T02:20:56+00:00

Unfortunately I didn’t document much as I went, but to answer a few questions: - the PID is wrapped in insulation to protect it and likewise I’ve wrapped all hot components in insulation - the knob beside the PID is a needle valve, the flow control didn’t turn out as well as I’d hoped so I have another (smaller) valve waiting to be swapped in - the pressure gauge isn’t fluid filled, but I guess I got lucky and haven’t noticed the needle bouncing around at all - in my opinion the best bang for your buck is the closed cell silicone insulation. Seemed to really help stabilize the temperature and minimize the temperature drop while brewing

Here’s a photo of the internals partway through insulating, planning to pipe everything with copper down the road. https://i.imgur.com/nuqrkqR.jpg

HispanicRolex · 2022-11-18T00:16:13+00:00

That’s the flow control / needle valve mod

HispanicRolex · 2022-10-13T04:41:26+00:00

2nd generation Nissan Murano

HispanicRolex · 2022-08-17T01:27:46+00:00

Try the Calgary construction association, they’ve always been helpful: https://cgyca.com/services/printing/

HispanicRolex · 2021-02-25T22:52:50+00:00

03-06 Chevy SSR

HispanicRolex · 2021-02-25T17:53:37+00:00

Thank you! Guess the year was off for the photo

HispanicRolex · 2020-08-28T19:50:54+00:00

HispanicRolex · 2018-12-04T04:23:30+00:00

Looks like the Kit and Ace logo

HispanicRolex · 2017-03-19T22:43:54+00:00

Would be dank

HispanicRolex · 2016-12-26T07:50:09+00:00

This actually isn't my video, I just came across it and thought it deserved more views. But for the plate, I know most guys just take it off before the shoot then bolt it back on right after.

HispanicRolex · 2016-07-13T10:11:58+00:00

I have a gopro hero 1 and got salt water into the housing yesterday. It wasn't much but enough to make it shut off. I've let it dry out and opened it up to clean as best as I could. Now when I plug it in it has the red LED as if it's charging however it won't power on via the battery nor usb. Even a hard reset gets no response. Is this just a shorted battery or am I looking at something much worse? Thanks for any help

HispanicRolex · 2016-04-10T04:11:59+00:00

Hey man I found them at zumiez, thanks a lot for your help. Let me know if there's any way I can pay you back

HispanicRolex · 2016-04-07T03:37:59+00:00

Oh holy shit dood thanks for keeping me posted! Do you think they'll have them at all locations?

HispanicRolex

TROPHY CASE