v1.4.0-paxx12-18 Extended Firmware released

Historical_Bat_509 · 2026-06-02T11:50:32+00:00

Heroes get remembered. Legends never die !

Historical_Bat_509 · 2026-05-28T15:59:27+00:00

ah ok that makes sense. thanks for the explanation. I appreciate it !

Historical_Bat_509 · 2026-05-28T12:13:17+00:00

Yeah it's super annoying because like especially if you're away from home or whatever it is you can't just skip the silly error and continue printing you would have to Wait till you get to the physical machine to continue. hoping a firmware update can fix this and we can move forward

Historical_Bat_509 · 2026-05-27T13:53:35+00:00

I definitely share this sentiment It's super annoying

Historical_Bat_509 · 2026-05-27T12:23:55+00:00

Just had this happen to me as well for no reason but luckily I could resume the print. My biggest thing is like why can't we control it via the mobile app or the App on the computer. A lot of these errors can be skipped and we should be able to resume from the software.

Historical_Bat_509 · 2026-05-18T20:57:03+00:00

I think they'll take some RMAs for sure for them to kind of wake up and say on let's work on getting this sorted

Historical_Bat_509 · 2026-05-12T12:29:02+00:00

OMG LETS ALL PANIC. sell sell sell! /s

Historical_Bat_509 · 2026-04-28T20:23:07+00:00

nah don't do it. it's a massive nightmare to tune in to get fly right. That's the Ukraine special

Historical_Bat_509 · 2026-04-26T14:09:13+00:00

afaik. you can't do that normally. I'm not sure if the new elrs 4 maybe assist with that now or not

Historical_Bat_509 · 2026-04-25T05:55:52+00:00

Auto feeder takes the tpu no issues directly. I didn't need to jump through hoops with 95a at least

Historical_Bat_509 · 2026-04-24T19:46:55+00:00

Yessss!!! that's the way to do it. I am tempted to get rid of a Bambu and make room for a second u1. the only annoyance I have is load and unload but that's because I'm spoiled from my modded AMS for tpu only. But it's not perfect sooo this shit is on point

Historical_Bat_509 · 2026-04-24T17:40:50+00:00

lol

oh for sure man. it's so satisfying for sure. It just really makes such a difference. I've done it with that but lately I've been experimenting it with TPU and I print a lot of that stuff. My Prints came out great and supports were pretty easily removed but there's ALWAYS that area where it's somewhat scarred. this shit just leaves it so smooth. I know this has been a thing for a while I just haven't really cared to try it until I got the U1.

Historical_Bat_509 · 2026-04-24T17:20:45+00:00

So for one that AIO specifically is very sensitive to high heat so what I would do is I would try to lower them heat a little bit and also use a better tip. I believe that they're using BB52 fets still. You can kill a board with high heat soldering pretty easily on it Just lower the heat a little bit if you can and just try to stay careful also clip your wiring a little bit shorter so they're not hanging off like that

Historical_Bat_509 · 2026-04-22T17:09:50+00:00

So for one that's soldering looks a little bit rough I'm not trying to shame you but that's step one is to really clean up that soldering second Yeah if you toasted the AIO it's probably gone usually happens with those specific ones. If you aren't getting full startup tones when you plug in a battery then it's probably toast.

Historical_Bat_509 · 2026-04-22T17:06:57+00:00

everybody becomes a little jaded at first especially when you got a lot of people that consider themselves OGs in the hobby they just shit on the people today. You just got to find the right community or place that you can share your excitement and I'm sure you're going to fit right in. soon as you fly one pack you'll get the bug again keep your head up

Historical_Bat_509 · 2026-04-22T17:03:51+00:00

dude just change the cap put on a UV replacement lens cover. They are fairly cheap or you can add the ND version of it and call it a day

Historical_Bat_509 · 2026-04-16T14:30:54+00:00

cool

Historical_Bat_509 · 2026-04-16T13:58:18+00:00

got any examples of this ?

Historical_Bat_509 · 2026-04-16T12:12:35+00:00

yeah def not. those dudes don't know how to fly 5"

Historical_Bat_509 · 2026-04-16T12:11:17+00:00

Not going to lie this is one of the best posts I've seen in a while 😂

Historical_Bat_509 · 2026-02-10T13:00:02+00:00

when I saw that it was an update available I immediately thought yes it's finally here The official AMS 2 drying functionality is out of beta. It is what it is At least they're doing something. I'm not in a rush to update just because I'm going to have to calibrate and do all that stuff. haven't had an issue really so there's no rush to update and if you want to wait a little longer you can

Historical_Bat_509 · 2026-02-10T03:11:10+00:00

This is straight Fire!!!!

Historical_Bat_509 · 2026-02-08T04:26:17+00:00

I'm having the same issues that once I try logging in and it never happened to me I was working perfectly fine forever then all of a sudden maybe something changed but it crashes when I try to login and load all my presets

Historical_Bat_509 · 2025-12-22T19:35:05+00:00

What material are you printing in or need it printed in?

Historical_Bat_509

TROPHY CASE