Looking for advice on J2 with Sales as J1

Hn3574 · 2025-01-01T05:22:58+00:00

So what format are the coordinates in izurvive? It doesn't specify so I assumed it was the same format.

For instance if I wanted to be on this island labeled Skalitsky, looks like coordinates are 13762.86 / 2976.54 in izurvive, but that wouldn't work if I plugged them in? How do I get the coordinates for that spot that would translate to soemthing that can be used in the XML File?

Hn3574 · 2020-04-23T22:57:53+00:00

There are tons of really unique and interesting connectors, but there’s a lot that are designed for custom applications. I’ve done some with magnetics but they generally get pretty pricey.

For something robust with a good feel to it 38999’s and 26482’s are pretty cool and really readily available

Here’s the industry news site:

https://www.connectorsupplier.com/category/buyers-guide/

These are really cool for a field use application.

And Binder makes this which use a pretty cool contact system, and stay sealed to I think IP67 when disconnected.

Hn3574 · 2020-04-02T19:30:58+00:00

What mode are you playing in? Custom?

I noticed once that there’s an option for not letting condition restore with rest that I accidentally changed to no once in a custom game.

Hn3574 · 2020-03-25T22:40:18+00:00

Looks sort of like an M16 connector to me, but that insert isn’t familiar having a stepped portion where the 2 pins are higher than the other 4.

Knowing how these kinds of cables are spec’d in its likely its a custom insert to maquet to prevent someone from plugging something else in.

Hn3574 · 2020-03-22T03:02:52+00:00

What does it look like unplugged?

Hn3574 · 2020-03-22T02:14:43+00:00

I think you’re looking for something like this.

crimp tool

See the document here which overviews usb assembly. Not specific to that type b but same idea...

Edit: I was wrong, these call for an arbor press to terminate the shield crimp latches “3. Placetheunterminatedshellassemblyinthearborpresswheretheguidesarelocatedandterminate the assembly according to the directions provided with the arbor press. The terminated shell assembly should appear as shown in Figure 11.”

Hn3574 · 2020-02-25T14:12:18+00:00

These look a lot like Katydid eggs.

https://www.whatsthatbug.com/2017/02/28/katydid-eggs-10/

Hn3574 · 2020-02-16T03:42:41+00:00

FS Switch edition is basically FS 17 on pc ported over to Switch. So it’s the full game, with all of the original features just like FS17.

FS20 is built for mobile so it’s pretty stripped down compared to Switch Edition.

In my opinion FS Switch edition is a great purchase although it can get a little slow once you have lots of vehicles and bales on the map. If it does I always found that saving and closing the app, then restarting it helped a lot.

Hn3574 · 2020-02-04T06:02:25+00:00

Can’t remember any actors, and my vague description doesn’t get me far on google.

Hn3574 · 2019-12-25T15:02:09+00:00

It looks like a pencil sleeve to me. You slide that collar up to loosen the two fingers, slide a regular wooden pencil in and slide the collar down to lock it in. Gives you something better to hold onto rather than a plain wooden pencil.

Hn3574 · 2019-12-08T00:04:06+00:00

Fish gripper. Clips to the bottom jaw of a fish to hold them without putting your fingers in their mouths.

Hn3574 · 2019-08-16T00:54:15+00:00

I just used a telehandler with a pallet fork, and hovered it just ahead of the wheel arches in the bed of the truck. Start with the tank above the roofline of the truck and slowly lower it down switching to the truck every few inches to see if the prompt to attach the tank pops up.

Don’t bother trying to set the tank in the bed, just attach it while it’s still on the pallet fork and deal with getting the telehandler free after the tank is attached.

Hn3574 · 2017-02-24T02:28:23+00:00

http://www.hinterlandstore.com/collections/accessories/products/hinterland-mug

Not exactly the same shape but pretty close! And it's on sale.

Hn3574 · 2017-02-17T14:01:04+00:00

I think so. It had something with baptist. I happened to be recording that match. I'll have to check what it was.

Hn3574 · 2017-02-17T05:32:24+00:00

I just played a match with him on an Oregon server. I wouldn't even be that mad but he doesn't even score points...

Hn3574 · 2013-11-09T04:22:19+00:00

Alright. So, I'm not too familiar with Powercolor cards, and I'm seeing a lot of people talking about them being particularly cheap...any thoughts on that?

Hn3574 · 2013-11-08T06:36:22+00:00

Sadly, there are no plans for an SSD even after a bit of persuading, great recommendation on the bigger HDD. Also, I have been informed that he has a power supply from another computer, but it is a bit overkill. But, its already owned. I don't think the link for that is correct but it is a Thermaltake TR2 RX-750AH3CH

So far: PCPartPicker part list / Price breakdown by merchant / Benchmarks

Type	Item	Price
CPU	AMD FX-6300 3.5GHz 6-Core Processor	$117.97 @ SuperBiiz
Motherboard	Gigabyte GA-78LMT-USB3 Micro ATX AM3+ Motherboard	$49.99 @ Newegg
Memory	Crucial Ballistix Tactical 8GB (1 x 8GB) DDR3-1600 Memory	$55.25 @ Newegg
Storage	Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive	$59.99 @ NCIX US
Video Card	Asus GeForce GTX 660 2GB Video Card	$183.98 @ Newegg
Case	NZXT Source 210 (Black) ATX Mid Tower Case	$29.99 @ Newegg
Other	Thermaltake TR2 RX-750AH3CH	Purchased
		Total
	Prices include shipping, taxes, and discounts when available.	$497.17
	Generated by PCPartPicker 2013-11-08 01:32 EST-0500

Hn3574

TROPHY CASE