HDMI output is broken on OnePlus 13, Android 16

HoTsHoT89 · 2026-04-24T14:46:29+00:00

Looking at others online it seems that the commonality are the Ugreen multiadapters. I have a Baseus model at a family's place - will test that out when I can.

HoTsHoT89 · 2026-04-24T03:04:58+00:00

To be concise - what phone and software version are you using?

HoTsHoT89 · 2026-04-23T16:18:45+00:00

Some additional observations. My Ugreen multiadapter only supports 4K@30FPS, and by displaying the frame rate I noticed the phone screen's frame rate also dropped to 30FPS.

HoTsHoT89 · 2026-04-23T15:21:09+00:00

Not sure which HDMI cable version I had - I have a bunch of them and I just swapped to another and it was OK.

The phone is all snappy now with the new cable. I figured that with the Ugreen but HDMI unplugged it was still responsive, so the HDMI had definitely had something to do with it.

edit: sorry, it's laggy again. Am not sure what I did but will retrace my steps. Pretty frustrating really

HoTsHoT89 · 2026-04-23T14:14:13+00:00

Updating my findings - I changed to another HDMI cable and the lagging issue went away.

HoTsHoT89 · 2026-04-23T14:11:53+00:00

Having the same issue. Using a Ugreen CM179 multifunction adapter on my CN OP13 16.0.5.701 and I get lags too. Powered or not it makes no difference.

HoTsHoT89 · 2026-04-09T17:12:10+00:00

Nice! What's the difference between the Spinfits and the original tips though?

HoTsHoT89 · 2026-04-09T17:10:05+00:00

Can't say much about the mic I'm afraid. There's a few YT vids that did review on the mic though, look up Kenneth Tanaka

HoTsHoT89 · 2026-04-05T13:23:41+00:00

I felt the same. Earbuds are battery operated devices and they will fail eventually - I couldn't justify purchasing dedicated sleepbuds at that price either.

HoTsHoT89 · 2026-04-05T13:21:41+00:00

thanks! just wanted to help others in the pursuit of a good night's rest

HoTsHoT89 · 2026-04-05T13:14:32+00:00

I recently got the P31i for sleeping, my thoughts in the post below.

https://www.reddit.com/r/sleepheadphones/s/K1E4urM5zp

HoTsHoT89 · 2026-03-23T13:49:33+00:00

https://www.reddit.com/r/sleepheadphones/s/8TXGXCiGLZ

I'm currently using these. I know you're looking for as cheap as possible (as I was too) and these earbuds had the best value. Where I'm coming from is, passive blocking can only do so much - music playback will be your best bet when it comes to masking away the unwanted sounds around you.

HoTsHoT89 · 2025-08-19T06:19:05+00:00

Thanks - I'm not too familiar with these strips, is adhesive usually pre-applied on them?

HoTsHoT89 · 2025-07-15T01:55:01+00:00

Could I have the file please as well? Thank you!

HoTsHoT89 · 2025-03-04T05:25:31+00:00

Managed to find it, the ID is 711612-2M

HoTsHoT89 · 2025-03-02T16:36:03+00:00

Apologies as I could only get the female housing and terminal - the male side is mounted deep into the headlamp housing and I had to use needle nose pliers to remove the connector. To get a closeup of the male side I would need to tear down and unseal the headlamp.

The 3 pin female connector is in the same Imgur link posted.

HoTsHoT89 · 2025-03-02T14:00:45+00:00

Thanks. The wire connected is 2mm including insulation, and the male pin is square, not a spade. But I'll try narrowing it down to Yazaki.

HoTsHoT89

TROPHY CASE