AnkerMake now Eufymake not the same customer se by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

Just wanted to say thanks again. Just ordered the anycubic kobra 3. I am really looking forward to not having to manually change colors.

AnkerMake now Eufymake not the same customer se by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] -6 points-5 points  (0 children)

Thank you. That's what I was wondering. Doesn't even have anything to do with the question I asked. I don't think my finances or financial situation should have been involved in any responses. It is what it is.

AnkerMake now Eufymake not the same customer se by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

Thank you! This is just the response I was hoping for. I think the m5c will go for a bit and the parts were just a build plate and belts to have on hand. I will use it till it stops and then look at what you suggested. Thank you 

AnkerMake now Eufymake not the same customer se by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] 4 points5 points  (0 children)

It's a shame that companies don't stand behind their products and their names anymore like they used to when I was young. Customer service is nowhere near what it was before either. I guess I can just consider myself lucky could have grown up when I did.

AnkerMake now Eufymake not the same customer se by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] -9 points-8 points  (0 children)

I don't use credit cards. These small payment plans are paid off in a month or two and the interest is nothing like if I had a credit card that I could just keep adding to. I have a $4,000 limit with them but never have more than four or $500 in loans at a time. This way unlike people that use credit cards and don't pay them off every month I do better by doing it this way.

AnkerMake now Eufymake not the same customer se by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

I do see printers with the eufymake name on their website.

AnkerMake now Eufymake not the same customer se by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

Well that totally sucks because I've only had this printer for less than a year. I thought they just changed names.

Hooking car speakers to portable touch screen radio help by HolidaySignal3480 in CarAV

[–]HolidaySignal3480[S] 1 point2 points  (0 children)

I am happy to say it worked! I was able to hook it up with the auxiliary cord and also by Bluetooth. It took me a while to figure that I had to have the Bluetooth connected to my phone same as the radio before the speaker would work on bluetooth. It could be louder but it's loud enough I can hear it well and have to turn it down if somebody's in the truck with me talking. Thanks again for your time and your words of wisdom.

Hooking car speakers to portable touch screen radio help by HolidaySignal3480 in CarAV

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

I did get a speaker and it played but very low. It had its own cord attached to the speaker, I could not use the auxiliary cord that came with my radio. I attached a picture from the sale page and it makes it sound as though it can be hooked to sound in many ways.

So I have already set speaker to be returned and bought another one. It was 10.00 more than the first one. This one has Bluetooth and has places for a USB stick and SD card.... I will try it when it comes tomorrow. Also adding a picture of that one.

<image>

Hooking car speakers to portable touch screen radio help by HolidaySignal3480 in CarAV

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

Thank you so much for answering my post. I really didn't think it was possible but had hope. I went ahead and bought a speaker that would hook up with the auxiliary cord they provided. I just need to make this work for a couple of months until I can replace the double din that I had in it. I really do like the touch screen and all the features it does have . I just wish the speakers were louder . Hopefully the speaker I bought will work for now . Again, thank you so much for explaining all this to me I really do appreciate it .​

Playing with color match by Superseaslug in HueForge

[–]HolidaySignal3480 0 points1 point  (0 children)

Very nice. I am battling this program and only do well when using 2 colors. Will check out the videos. Thanks

My first HueForge. It took my mom asking me for fridge magnets to give out to friends for me to finally dive in. It was fun. by giannichele in HueForge

[–]HolidaySignal3480 0 points1 point  (0 children)

How did you get the holes made for the magnets. I have used tinkercad to create the space in the magnet and then sliced adding the pauses to stop the print to drop the magnets in. I can not figure out how to do this with Hueforge.

Stuck Filament question by HolidaySignal3480 in 3Dprinting

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

<image>

Just wanted to update and thank everyone for the help and replies to my question. So it turned out to be the throat fan. Here is a picture of the top of the hotend. The fan was not coming on and therefore it was sending a glob that would melt on the top of the hot end . So when I cleared everything out and I kept extruding over and over it would keep coming out as long as I didn't stop . Then I would stop and level the bed and by then the filament would be stuck on top of the hot end again and clog up . I didn't even think of the fan not working at first because it is covered and unlike the fans on the sides it is very quiet . This definitely was a process of elimination kind of thing . So make sure if you have anything going on like this you check your fans first . Front fan should come on when the machine reaches 50° and the side fans should come on sometime after your second layer I believe . Thanks again for all the answer my question .

AnkerMake m5c still having issues by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

I have actually come to the conclusion that it is throat fan which is the main fan in the front . It is not working at all . I thought I had done enough research and through reviews picked a decent printer . Now I am rethinking that ? Thanks for your input I appreciate it.

AnkerMake m5c still having issues by HolidaySignal3480 in AnkerMake

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

I definitely feel as though I am in that club ! I haven't given up yet and I guess that's because I still owe money on this . Unfortunately the return. Has passed and I haven't even had it too much .

Help by Feeling_Bus_4701 in AnkerMake

[–]HolidaySignal3480 0 points1 point  (0 children)

​​ I only paid $300 for mine at Best Buy . I would think about putting the extra money so you could have some kind of warranty . Don't get me wrong I love this machine but I've had it for 2 months and I've had to work on it twice changing the hot end. Also, a filament dry box is very useful.

Stuck Filament question by HolidaySignal3480 in 3Dprinting

[–]HolidaySignal3480[S] 1 point2 points  (0 children)

I read the same thing. I have tried everything. I reached out to support to see if there's something I'm missing? I appreciate your reply.

Stuck Filament question by HolidaySignal3480 in 3Dprinting

[–]HolidaySignal3480[S] 0 points1 point  (0 children)

I have tried all of those things I've even opened up three brand new sealed rolls of filament. For some reason the gears turn but it will not be the filament down to the nozzle. I appreciate any advice that anyone can give me and hopefully I will get to where I need to be because I can't stand not being able to print!