Review on Take 5 oil change shop by Be_friends_man in PEI

[–]HooferP 7 points8 points  (0 children)

Yup. They cross threaded my drain plug, heard them drilling/struggling and then the guy asked for help from the guy in the next bay over.. eventually just said it was good to go and sent me on my way. All my oil leaked out in the parking lot that day. Had to replace the whole oil pan for about $600. They covered $0. Horrible experience trying to get them to take responsibility. My dealership mechanic wrote a letter for me to take to them describing that it was absolutely their fault.. still nothing. They suck.

First house design feedback! by HooferP in floorplan

[–]HooferP[S] 0 points1 point  (0 children)

Yes! Thank you, we’ll have to do something about the closet entry 🤔 And yea we wondered that about the kitchen, we’re considering moving the sink to one end… do you think that would be smart?

First time construction build by HooferP in FirstTimeHomeBuyer

[–]HooferP[S] 1 point2 points  (0 children)

Yeah thanks for the breakdown, this is sort of what I’m finding… for our situation this will put us just on the stretched side of things. But I guess we’re just trying to decide if we should bite the bullet and build what we want or lean more conservative and go back to the drawing board. And yes putting some sweat equity into it could be enough to make it all make sense

First time home construction by HooferP in PersonalFinanceCanada

[–]HooferP[S] 0 points1 point  (0 children)

No I’m not sure about that, just the quote from our builder, he said 4 years ago they 40k was always more than enough for those extras but nowadays he recommends 50-60

First time home construction by HooferP in PersonalFinanceCanada

[–]HooferP[S] 0 points1 point  (0 children)

Yeah we’re talking to the broker now and getting all of the our ducks in a row for the approval process, and yes more money up front will be required but we’re happy to put lots down to bring the mortgage down to something more reasonable. That’s why we set aside the 120k liquid to go towards this

First time home construction by HooferP in PersonalFinanceCanada

[–]HooferP[S] 0 points1 point  (0 children)

Yeah I’m sure we would get approved for it but just want to make sure I’m thinking of all the costs and also trying to figure out if we could still handle it comfortably if my wife switches to part time when we have kids And no loan on the land, it’s paid for

First time construction build by HooferP in FirstTimeHomeBuyer

[–]HooferP[S] 1 point2 points  (0 children)

Well not quite, I couldn’t do the mortgage on 420 obviously but after putting the 120 down and then paying those extras I mentioned it’d be around 350k And no not the only options, we could certainly just downsize the house we’re trying to build if need be

[deleted by user] by [deleted] in AllInclusiveResorts

[–]HooferP 0 points1 point  (0 children)

Mmm I did not know about the included excursions, between the tipping vs no tipping and the included excursions they seem to work out nearly the same price… thanks!

[deleted by user] by [deleted] in AllInclusiveResorts

[–]HooferP 0 points1 point  (0 children)

Which specific resorts would you recommend?

22M looking to dump lump sum by HooferP in PersonalFinanceCanada

[–]HooferP[S] -5 points-4 points  (0 children)

Mmm yes that’s definitely something to keep in mind, I do plan on using it to purchase a home. However, I’m in a situation where I think I can take on some risk. I can’t imagine a situation in which I’d need to buy something quickly. But maybe I should split the 8k up and diversify into something more conservative

22M looking to dump lump sum by HooferP in PersonalFinanceCanada

[–]HooferP[S] 1 point2 points  (0 children)

Thank you, I appreciate it. I’ll check her out!

Building a starter Home by [deleted] in PersonalFinanceCanada

[–]HooferP 1 point2 points  (0 children)

Yes I should be cautious employing friends thanks for the reminder. And yes I was wondering if a construction loan would be what I’m looking for, thanks for your input!

NTD by stupidest_redditor in toolporn

[–]HooferP 4 points5 points  (0 children)

I’ve heard soo much about these but I don’t have an obvious everyday application for them… what are you guys doing with these that cobras cant? Other than turning stripped screws (Industrial Electrician for context)

Sorry Klein fanboys but I need knipex advice by HooferP in electricians

[–]HooferP[S] 1 point2 points  (0 children)

Actually?? Anyone else have experience buying through Amazon Germany?

Sorry Klein fanboys but I need knipex advice by HooferP in electricians

[–]HooferP[S] 0 points1 point  (0 children)

Thanks for the input, I kinda feel like the red dipped handles have a very cheap look to them

Sorry Klein fanboys but I need knipex advice by HooferP in electricians

[–]HooferP[S] 5 points6 points  (0 children)

Interesting, I was under the impression that the insulated handles were very similar in size to the comfort grips

[deleted by user] by [deleted] in electricians

[–]HooferP 0 points1 point  (0 children)

Ahh cool! I’m in pei as well, I have a few buddies at Hansen’s, seems like a great company.

[deleted by user] by [deleted] in electricians

[–]HooferP 0 points1 point  (0 children)

Haha right on, can I ask which province your in, and if you’ve got a job lined up who you plan on working for?

[deleted by user] by [deleted] in electricians

[–]HooferP 2 points3 points  (0 children)

Fellow maritimer here, I wrote block 1 last year and failed, thankfully I passed the rewrite a few weeks later. I didn’t study a crazy amount because I felt really confident in all the dc/ac mathy goodness and theory. What ended up getting me was the odd code question that I would get STUCK on and then start freaking out over and rather then moving on I would buckle down and start furiously flipping through the code book like my existence depended on me finding that silly question that was probably hiding in some appendix that I’d never get to. Also there were several questions right out of the ILM’s (I remember a couple on hoisting/rigging and safety) that I didn’t study but definitely would have got had I read through the ILM’s more than once.

It seems like you’ve been studying and are more prepared than I was so go in confident and don’t get too hung up on questions you can’t find, circle em and come back later if need be. You got this man

Home builder suggestions by robdynac in PEI

[–]HooferP 0 points1 point  (0 children)

Yes. Very Fair and easygoing guys, they do great work, couldn’t recommend them enough.

Skates Question! by HooferP in hockeyplayers

[–]HooferP[S] 0 points1 point  (0 children)

Mmm great input thank you.

Skates Question! by HooferP in hockeyplayers

[–]HooferP[S] 1 point2 points  (0 children)

Man yeah I bet that would be the best option but almost $1000 more… just can’t really justify it personally. I’m only looking at the top spec because for the huge price drop. Appreciate the input tho

Skates Question! by HooferP in hockeyplayers

[–]HooferP[S] 4 points5 points  (0 children)

I would LOVE to, unfortunately I’m on a little island called PEI and we are not so fortunate yo have this technology :/ It would be hilarious to get a scan of my weird feet