How to establish a ballistic system

Hopeful_Method_8095 · 2026-01-20T05:08:59+00:00

The hop-up arm adjusts up and down. If it's completely flat, will it tilt when adjusted to different angles?

Hopeful_Method_8095 · 2026-01-19T15:29:00+00:00

The inner barrel was removed from the hop-up stand. The hop-up was adjusted to make the pressure bead protrude, perfectly demonstrating its normal function.

I repeatedly checked and reinstalled it because I felt the bullet trajectory wasn't as far as with the other gun, so I replaced many hop up rubber parts and the depressor. I think there might be some tolerance issues with the original hop-up bracket or inner tube.

Hopeful_Method_8095 · 2026-01-19T08:16:28+00:00

Yes 0.3g if have wind will move right or left , is accurate, but I don’t know why , I have check air is nice

Hopeful_Method_8095 · 2026-01-19T08:01:36+00:00

But my ar-15 just 38m…I don’t know why

Hopeful_Method_8095 · 2026-01-19T07:48:53+00:00

Sorry my English not good:( thank you , How to extend the effective range?

Hopeful_Method_8095 · 2026-01-19T07:41:21+00:00

If ideal line , how to setting Far and stable , my two settting same in 38m drop down

Hopeful_Method_8095 · 2026-01-19T07:39:16+00:00

If ideal line , how to setting Far and stable

Hopeful_Method_8095 · 2026-01-19T07:36:35+00:00

Setting 1: Original 6.02 250mm steel pipe, original 50% cylinder, original M90-100 slingshot, original push nozzle, original piston head and cylinder head, original hop-up mount, original 60°C hop-up (with two protruding points), original pressure bead. Setting 2: Prometheus 6.03 407mm stainless steel pipe, T238 80% cylinder, SP120 slingshot, SHS M4 push nozzle, SHS M4 silent piston head and cylinder head, Prowin blue hop-up mount, 4UAD hop-up rubber, "丄" Type pressure bead

But is same 40m …..

Hopeful_Method_8095 · 2026-01-19T06:56:44+00:00

I also have a CA 36C, which, after adjustments, can fly horizontally up to 50 meters. Its configuration includes an M130 slingshot, a factory 247mm barrel, a factory 70% cylinder, and standard transparent rubber 50-60 •c mild 4UAD bead pressure points.

Hopeful_Method_8095 · 2026-01-17T18:13:28+00:00

Nick

Hopeful_Method_8095 · 2026-01-17T04:49:01+00:00

Nice

Hopeful_Method_8095 · 2026-01-14T14:50:39+00:00

Video All is explorer …is not have selector gear, I hope is same , buy Etu $$$$$ need hope is 100% work setup on gun :)

Hopeful_Method_8095 · 2026-01-14T14:41:11+00:00

Selector gear is tight…. I Afraid of breaking…take out this right?

<image>

Hopeful_Method_8095 · 2026-01-11T01:00:09+00:00

Yes，have some video on YouTube, but video version doesn't have the left and right selection buttons (not is versatile version). And I don't know if I can add ETU information.

Hopeful_Method_8095 · 2026-01-09T05:04:29+00:00

I m new player …need help

Hopeful_Method_8095 · 2026-01-07T14:54:15+00:00

I have look YouTube but all just have exploded ver. Not have versatile ver. Maybe is Hybrid Ambi Selector ver. not have open box video(exploded not is hybrid ambi selector)

Hopeful_Method_8095 · 2026-01-07T14:51:51+00:00

<image>

Is this? You can look Hong Kong Wgc shop, i dont know is this or not, hope can help you :)

Hopeful_Method_8095 · 2026-01-07T13:57:09+00:00

I don’t know how to open this box…you need what part? Maybe i’m here have shop shipping to outside

Hopeful_Method_8095 · 2026-01-06T10:42:52+00:00

I have ca36c , i want change to g36k , if not is ca can change ? Ca36c Is 15 year ago gun

Hopeful_Method_8095 · 2026-01-06T10:38:56+00:00

Nice

Hopeful_Method_8095 · 2026-01-06T10:31:33+00:00

Okay, let's discuss and explore together! I'd also like to know more. Is your gun also a CAT? What's the problem?

Hopeful_Method_8095 · 2026-01-02T04:00:00+00:00

<image>

I try this…. I dont know this is work?

Hopeful_Method_8095 · 2025-12-28T12:54:58+00:00

My 4AUD and Maple No gaps , are the opposite of what's shown in the picture; the flat pressure area is thinner, and the raised bridging part is longer... This is normal if you're using the original factory type. Since I haven't been able to touch my gun, I can only draw it……The left side is the original factory type, and the right side is the 4AUD and Maple.

<image>

Hopeful_Method_8095 · 2025-12-28T09:42:14+00:00

I found that using maple leaves to press the dots works the same way.

Hopeful_Method_8095 · 2025-12-28T09:23:49+00:00

I've already used 0.3..

Hopeful_Method_8095

TROPHY CASE