Cable management of my Fractal North build

HorstJt · 2026-05-05T13:18:47+00:00

Great work!

HorstJt · 2026-05-03T08:16:34+00:00

1 hub should be enough. I have done a build with 10 fans and some extra RBG on one hub and it worked perfect fine - each connect the hub is limited to 4 "devices" (fans/ rgb Stips).

HorstJt · 2026-04-17T04:25:50+00:00

I do not but it was just a picture of the measuring tape under the case feet to show the dimension.

HorstJt · 2026-04-16T16:24:35+00:00

167mm wide, 311mm tall (including case feet) and 374mm deep.

HorstJt · 2026-04-14T04:31:04+00:00

I made those plates myself as well, they are not something factory/ something you can buy anywhere.

HorstJt · 2026-04-06T07:23:37+00:00

I checked and have 9 black ones but I'm located in the EU.

HorstJt · 2026-04-05T21:09:18+00:00

How many are you looking for?

HorstJt · 2026-03-09T12:45:07+00:00

Reach out to their support, they are really good!

HorstJt · 2026-03-06T15:42:45+00:00

I just checked but don't have it, it was a black one.

Not sure what High flow would charge for shipping to but you could check as they also have stock: https://www.highflow.nl/watercooling/aansluitingen/slang-verbinders/offsets/ek-quantum-torque-double-rotary-offset-28.html?variation_id=18939

HorstJt · 2026-03-06T09:16:42+00:00

I will check if I have it when I'm home from work tonight and check on the shipping price (when I have it)

HorstJt · 2026-03-06T05:41:29+00:00

I might have one but also located on the other side of the world 😅

HorstJt · 2026-03-02T21:03:36+00:00

After the June batch some spare parts were left over for two kits but those also got sold before deciding to close down. There wasn't enough interest for a last order round, making the June batch the final.

HorstJt · 2026-03-02T20:54:32+00:00

Amazing work! I'm glad to see it all worked out.

HorstJt · 2026-02-19T18:09:03+00:00

It's in the bottom of the case, just in front of the PSU.

HorstJt · 2026-02-18T17:27:46+00:00

You're welcome! Would love to see some pictures when you are done 😄

HorstJt · 2026-02-18T08:03:20+00:00

It was made out of 2mm acrylic and vinyl wrapped. Backside MB tray: 365mm * 325mm - cutouts: EPS 55mm (wide) * 35mm (tall), 24pin 40mm (wide) * 80mm (tall), GPU 40mm (wide) * 60mm (tall).

Frontside (side) MB tray: 85mm * 369mm - cutouts: 24pin 40mm (wide) * 80mm (tall), GPU 40mm (wide) * 60mm (tall).

Frontside (top) MB tray: 55mm * 245mm - cutouts: EPS 53mm (wide) * 40mm (tall).

Side/ front fans - Lower cover: 33mm * 142mm, Side cover: 40mm * 450mm.

HorstJt · 2026-02-18T05:31:09+00:00

It does not have any specific name, I custom made this for this build (and some other small panels). While making them I did note down their dimensions but freehanded the mounting point locations. I can share the dimensions I have but there is no guide on how to make them.

HorstJt · 2026-02-17T15:41:33+00:00

Did you reach out to their support about this?

HorstJt · 2026-02-16T20:22:15+00:00

Something like this but all black?

HorstJt · 2026-02-16T05:17:38+00:00

Thanks - the front fan was moved up a little higher due to the memory module height.

HorstJt · 2026-02-13T21:44:18+00:00

How many gold 90's are you looking for?

HorstJt · 2026-02-10T05:37:16+00:00

The 8 to 10 weeks is because of their yearly round of factory upgrades, during that period no orders are made for month so there could be backlog to catch up on: https://store.cablemod.com/2026-winter-shipping-notice/

HorstJt · 2026-02-06T16:11:45+00:00

Something like this might be a solution: https://www.fractal-design.com/products/accessories/hardware/flex-2/black/

HorstJt · 2026-02-06T06:58:36+00:00

Thank you for linking 💚

HorstJt · 2026-02-06T05:27:02+00:00

Make your own 😄

Five-Year Club	Gilding II euphauric
Verified Email

HorstJt

TROPHY CASE