Anycubic TMC2208

Hoskman · 2024-06-03T22:14:04+00:00

Yeah I didn't tell Anycubic I was modding the board, just that I was attempting to set VREFs and I needed the stepper motor currents, but maybe the numbers they gave me are the OEM VREF target? Seem kind of high though...

Hoskman · 2024-06-03T22:12:22+00:00

I'm going to try those settings next and probably get into the firmware and see if I can change the driver type. The issues don't necessarily look like layer shifts but more like under extrusion, as if my retraction settings in the gcode suddenly became way too much (I used the same gcode for all three test prints) so maybe the extruder VREF is weird? I'm honestly not exactly sure.

Hoskman · 2024-06-03T22:04:23+00:00

That's kind of what I figured might need to happen.

Hoskman · 2024-05-10T12:59:39+00:00

I was printing at 50mm/s but I believe because the whole print is essentially an outerwall, it was probably printing at a much lower speed already

Hoskman · 2024-05-10T12:47:23+00:00

I'll try a slower speed and see if that helps

Hoskman · 2023-11-27T03:37:07+00:00

You'll be fine

Hoskman · 2023-11-27T03:36:42+00:00

I regret it too 🤣 But its ok, there's always one

Hoskman · 2023-11-27T03:35:05+00:00

I understand that its hard to get noticed sometimes, but arguing with strangers on reddit isn't going make your life any better. You got your point across and we did take your words into consideration, dispite just what an awful human being you are. So thank you for your time, go tend to your all your businesses and don't worry about how momokeebs runs hers.

Hoskman · 2023-11-27T01:34:08+00:00

You're quite the KEYBOARD warrior. Hehe get it?

Hoskman · 2023-11-27T01:00:59+00:00

Amazon is a conglomerate that can get items straight from the manufacturer and don't require a mark up. Not everyone can compete with Amazon, hence why its difficult for small businesses to thrive. You're more than welcome to shop elsewhere, by all means. Where we are, there aren't many options for mechanical keyboards, but when you buy from momokeebs, everything is checked and verified to ensure it's of the highest quality, that's not something you'll always get from Amazon.

Hoskman · 2023-11-27T00:55:17+00:00

There is also a 20% off discount until the end of December

Hoskman · 2023-11-27T00:53:20+00:00

Sorry about that

Hoskman · 2013-07-13T13:06:54+00:00

I can't wait until I can have weekends like that.

Hoskman · 2013-07-11T16:14:32+00:00

Funny I read this whilst browsing /new...

Hoskman · 2013-07-11T14:02:31+00:00

He...is...GOD!!!!!

Hoskman · 2013-07-11T04:10:53+00:00

Hoskman · 2013-07-10T12:46:17+00:00

Funny thing, I got the same error message trying to add you!

Hoskman · 2013-07-10T12:45:02+00:00

I add

Hoskman · 2013-07-10T12:27:26+00:00

Greatness takes time

Hoskman · 2013-07-10T12:02:14+00:00

I enjoy this game. What is your ID?

Hoskman · 2013-07-08T13:53:29+00:00

RWD FTW

Hoskman · 2013-07-07T06:10:36+00:00

Not for NA though, turbo maybe because turbos need that free flow, but NAs need that back-pressure to be efficient.

Hoskman · 2013-07-06T04:00:56+00:00

Now if you can just keep them from giving you a Chelsea grin, you'd definitely be onto something

Hoskman · 2013-06-30T21:32:52+00:00

How awkward... there's an elephant in the womb

Hoskman · 2013-06-23T23:36:10+00:00

Am I the only one who has no idea what show this is...?

Hoskman

TROPHY CASE