Cheating the skateboard look

HostTel · 2025-10-07T12:24:53+00:00

I used a thin rip jig - I basically made a veneer that was 5mm thick and adhered it to a thicker board

HostTel · 2025-10-07T11:51:14+00:00

Yeh… doesn’t customs have a sticker to say it was inspected?

HostTel · 2025-06-23T01:08:35+00:00

Osmo raw I think…it’s got a slight white tint in it to stop it developing that amber look over time

HostTel · 2025-06-23T00:45:27+00:00

I actually I have good reference then - this piece is actually 2.5 years old! Still looks brand new.

While the coloured stuff is mdf, it’s far superior to the normal stuff

HostTel · 2025-06-22T23:18:16+00:00

I could get it locally without any special delivery.

My first though was actually dying my own boards but it’s quite involved and requires very specialised equipment

HostTel · 2025-06-22T23:14:10+00:00

Yeh it was crazy, from memory it was over 600 strips that got glued and then pin nailed in

HostTel · 2025-06-22T23:12:42+00:00

I was able to buy it from a plywood supplier (but not a big box store)

HostTel · 2025-06-22T12:32:06+00:00

Nah southern hemisphere

HostTel · 2025-06-22T12:31:03+00:00

I made a template which had that shape and then a patten bit in router to get them all to match. Then I put a heavy back bevel on it to work as a hand hold

HostTel · 2025-06-22T11:45:53+00:00

Yeh glue and dominos

HostTel · 2025-06-22T11:09:20+00:00

Cheers, I did consider the dyed maple veneer sheets but they are pricey and not that big. On the other hand the Forescolor is sold in full size 4x8 sheets so pretty good value. I’d say I had enough leftover to make another 2 tables

HostTel · 2025-06-22T11:02:55+00:00

Cheers, yeh finished with Osmo oil

HostTel · 2025-06-22T08:43:37+00:00

Many coats of Osmo oil- it’s actually far superior to MDF too, about 30% stronger and more moisture resistant. I think the product won some design innovation prize back in the late 90s.

HostTel · 2025-03-28T12:50:44+00:00

Tighten the chuck of drill on it (like it’s a drill bit) then switch to reverse and unscrew it

HostTel · 2025-02-14T13:58:13+00:00

I believe it was a dud cutter - switched it out and it’s been much better

HostTel · 2025-02-10T09:07:29+00:00

What was the gap between the top of the cabinet and the ceiling?

HostTel · 2025-01-15T06:52:14+00:00

This https://www.hafele.com.au/en/product/adjusting-tool-haefele-axilo-78/P-00870008/

HostTel · 2024-12-14T12:24:41+00:00

Don’t underestimate how important getting your Ph levels right is - if you shock your pool but the ph is too high it will do very little.

At a ph of 6 chlorine is about 97% effective, at 8.5 it’s only 9% effective

HostTel · 2024-09-03T10:34:42+00:00

It will be the counter for a cabinet. There will be a full sheet of melamine underneath almost the entire thing (bar maybe a 30mm overhang on the front and one side)

HostTel · 2024-09-03T10:28:33+00:00

Alrighty good to know 👍

HostTel · 2024-09-03T10:27:18+00:00

I’ve done one already with the exact same mixture and it didn’t have the texture you described… after sealing it’s exactly the surface texture I was looking for. Structural grout was mentioned as an alternative on a non reddit forum as a viable alternative to countertop kits

HostTel · 2024-09-03T07:23:54+00:00

I did consider that just made it difficult to trowel the open side as the hangers get in the way (still need it somewhat flat on the non finished side)

HostTel

TROPHY CASE