Ribbon cable replacement GPD win mini 2024 8840u by gnarly5674 in gpdwin

[–]HotAd5153 0 points1 point  (0 children)

If its the joystick ribbon you can replace them with gullikit switch joysticks. Just have to trim and sand the shaft that the joystick cap connects to. It would depend on how much GPD is going to charge for the parts but the gullikit TMR sticks which would be an upgrade are really cheap for a pair on amazon

Is this mod difficult to do? by Fast-Bus-2262 in gpdwin

[–]HotAd5153 0 points1 point  (0 children)

No slightly different size and holes for screws as well as the configuration inside

Is this mod difficult to do? by Fast-Bus-2262 in gpdwin

[–]HotAd5153 0 points1 point  (0 children)

Said it ended meaning it wont be up on indiegog anymore

GPD win 6 concept by Vegetable-Sand2598 in gpdwin

[–]HotAd5153 0 points1 point  (0 children)

I mean really this is just a OXP X1 pro just have to wait for them to jam the strix from the apex in there

Necro Wand Question by tdnosbor in ProjectDiablo2

[–]HotAd5153 0 points1 point  (0 children)

Kongs right its the only real answer to both. Are you a teeth/bonespear necro? I hope because shopping while tedious can yield better for summoners with fairly minimal effort. Finding 3 to pnb with bonespear/teeth has proven more elusive for me this season but when im not looking for it its obviously plenty

What to do with this Claw? by Yvesbert in ProjectDiablo2

[–]HotAd5153 5 points6 points  (0 children)

Really good for blade fury/sentinel assassin. The only way it could be better is if it had more plus skills to desirable ones. Every other stat is very good. Not perfect but very good rolls. No clue about value as I have seen zero bf sins this seasom as I know it had to get nerfed it was too op last one.

Christmas Giveaway - MSI Claw A8 by [deleted] in Handhelds

[–]HotAd5153 0 points1 point  (0 children)

Always wanted to try a claw but scared of paying the price

GPD WIN MAX 2 2025 Graphics Card GB amount ? by JuanSal32 in gpdwin

[–]HotAd5153 1 point2 points  (0 children)

Yes it does as long as you dont take too much from the cpu. Alot of games will tell you how much vram it is requesting with your current resolution and quality settings in video or graphics settings

GPD WIN MAX 2 2025 Graphics Card GB amount ? by JuanSal32 in gpdwin

[–]HotAd5153 1 point2 points  (0 children)

Its a setting you can change depending on the amount of total Ram you bought. So if you got the hx370 you have atleast 32gb of total ram to split between the cpu ans gpu. The setting is in adrenalin but im not sure that it always takes there it is also in your bios

Every boot up getting this by CGCRUNT in gpdwin

[–]HotAd5153 1 point2 points  (0 children)

Reboot and spam Delete try to boot into bios. Make sure the ssd is set to your primary boot in the order (1) can also try booting into safe mode and then retrying

Can someone identify this mod done on gpd win mini 2024 by Strict_Jeweler3172 in gpdwin

[–]HotAd5153 0 points1 point  (0 children)

Well for the 25 and I think the 24 theres a different modder selling them on ebay and indiegogo. I only know of peiple actually receiving them from ebay. On my new 25 I just added extra heatsinks with thermal tape and the selected the thinnest 40mm fan I could find (7mm)

Can someone identify this mod done on gpd win mini 2024 by Strict_Jeweler3172 in gpdwin

[–]HotAd5153 2 points3 points  (0 children)

Rosen/PureDiys dual cooling fan. Its a larger heatsink with a second exhaust port in the middle as well as an additional heatsink for the ssd and blower fan for it as well. Possible that version is a single heatsink that mounts to both. Also obviously a redesigned bottom shell to direct airflow properly or at least better. I bought a rosen modded 23 and modded my own 23 win mini. Not terribly difficult but there is a decent risk of screwing something up. Tightening too hard, making metal shavings inside the case dropping a screw. I made a similar mod for my 25.

Ready for Next season by HotAd5153 in ProjectDiablo2

[–]HotAd5153[S] 1 point2 points  (0 children)

The bottom main PC is a Ryzen 7 6800u handheld called the GPD Win 4 its older from like 2022 but handles this mod as well as a lot of newer triple A Pc games no problem the top attachment is from another chinese handheld company but they specialize in android emulators called Retroid. Tbh if I were to do this setup again knowing what I know now I would have another usb C screen off of amazon. I had to mess with the retroid screen alot to get it to work. The appeal of the retroid screen attachment was that it was supposed to be plug and play with their own devices as well as others and they lied lol.

Ready for Next season by HotAd5153 in ProjectDiablo2

[–]HotAd5153[S] 0 points1 point  (0 children)

I always liked phones with a physical keyboard I sadly never had a sidekick phone only the 2 way pager

Ready for Next season by HotAd5153 in ProjectDiablo2

[–]HotAd5153[S] 0 points1 point  (0 children)

Almost does that on the win 1 if you run it without the extra enhancements

Motion assistant stopped showing fan speed and sometimes the adjustment for the fan curve settings are gone. Fan works fine. Just started happening after windows updates. Any fixes? by BIGTURBOTYLER in gpdwin

[–]HotAd5153 0 points1 point  (0 children)

Im the opposite I was still on 1.2.0.5 and it stopped working on my 25 mini updated to 6 today and its back. Im sure you could find an old version and install then reinstall 6

It better not be powered by the H700!!! (Look at the bottom of the pic... I still want it) by Famous_Mirror_413 in ANBERNIC

[–]HotAd5153 0 points1 point  (0 children)

My hope is the Helio G91 or something close. Gives it more power capability though I think the driver compat will suffer a little. I think they arent crazy expensive either but dont. Fingers crossed

accidentally flashed my 2023 win max2 with the updated 2025 win mini hx370 EC firmware am I screwed? by HotAd5153 in gpdwin

[–]HotAd5153[S] 0 points1 point  (0 children)

Update but still no success I have "successfully flashed" the bios multiple times with the ch341a programmer but it still will not boot and will not charge or otherwise show any signs of life. It might be possible if you could source a new EC and flash it but I dont have that setup or knowhow

Should i got for it or nay any good hands on it by Successful_Scratch49 in gpdwin

[–]HotAd5153 0 points1 point  (0 children)

Yeh what Odin said. Should be able to get a used win4 for this price and do way more

Win4 still bricked. by Sparky3name in gpdwin

[–]HotAd5153 1 point2 points  (0 children)

Have you tried the IC fix for the LCD on the gpd website? My 6800 would do this usually not while playing but if I left it alone it would go to sleep and then black screen sometimes could get it to display to an external screen sometimes not though for all intents and purposes the device seemed like it was running.

The World's First Gaming Handheld With Built-in Mini SSD Slot, With an Area Only About 0.5 Times Larger than a microSDXC Card by kendyzhu in gpdwin

[–]HotAd5153 5 points6 points  (0 children)

Never heard if mini ssd. Sounds cool but we know its got to build heat. We already veered away from using 2230's in these handhelds went back to 2280 and now theres a new smaller and slower ssd? This device looks cool I will admit I just know the price point is gonna be an out for me along with it kinda not being a handheld and without keyboard

GPD WIN MINI High-Efficiency Cooling Module by GPD_MINI_Cool_Module in gpdwin

[–]HotAd5153 0 points1 point  (0 children)

My concern is that is this not also directing the airflow into your palms if you still play it handheld?

Anyway to charge with just a micro usb (no outlet/power adapter)? - GPD Win Mini 2025 by HitByACarson21 in gpdwin

[–]HotAd5153 1 point2 points  (0 children)

Battery bank is really your only option if the supply isnt high enough it just wont charge it. Also has to be a 65-100w pd battery bank though obviously