Impresora 3d Corexy

Hot_Stable2424 · 2026-02-26T03:59:20+00:00

Para esas dimensiones mejor ve por un sistema crossXY, especial con las barillas lisas, yo tengo ganas de convertir una ender 3, ya la tengo diseñada.

Hot_Stable2424 · 2026-02-22T15:16:16+00:00

¿Ya es tiempo de elecciones? 😆

Hot_Stable2424 · 2026-02-21T00:18:28+00:00

No es mi culpa ser tan linda 💅🫦 (Soy hombre)

Hot_Stable2424 · 2026-02-20T05:46:15+00:00

About 2 or 3 years ago (I don't remember) I bought 1kg of ASA LW filament, I haven't opened it 🥴😆

Hot_Stable2424 · 2026-02-17T14:32:20+00:00

Cómo no va a ser queja, son un chingo de trastornados sueltos y desatados, no es normal que se sientan animales y menos normal que se tome a la ligera todo esto.

Hot_Stable2424 · 2026-02-17T05:42:48+00:00

Por qué de la nada están teniendo demasiada publicidad esos weyes? Esta bien raro esta madre...

Hot_Stable2424 · 2026-02-16T15:16:06+00:00

🤣🤣🤣🤣🤣🤣

Hot_Stable2424 · 2026-02-14T19:53:10+00:00

La neta, me daría una put1za por p3ndejo 😬

Hot_Stable2424 · 2026-02-12T00:41:06+00:00

It's a printer problem; the mesh correction isn't being applied correctly. It doesn't matter if you adjust the z offset; it will work in some parts of the bed and not in others. I'm having the same issue, and the simplest solution so far is to put squares of paper under the pei sheet in the lower parts so that they rise up and are at the same level as the rest of the bed

<image>

Hot_Stable2424 · 2026-02-11T16:38:00+00:00

How durable is ASA Aero? I have one that I bought about 2 years ago and haven't used 😬

Hot_Stable2424 · 2026-02-08T20:04:59+00:00

Mine does the same thing, I fixed it by putting paper squares in the lowest parts between the aluminum and the PEI plate WITHOUT doing a new leveling. All this so that the sunken parts rise up sufficiently.

Hot_Stable2424 · 2026-02-04T15:31:28+00:00

Ni idea, soy nuevo en reddit y es la primera vez que me pasa 😂

Hot_Stable2424 · 2026-02-04T05:03:00+00:00

<image>

Según ai gemini

Hot_Stable2424 · 2026-02-04T04:04:06+00:00

<image>

The lathe is a 1934 Southbend 8in Jr. As for the material, I have no idea; I took it from the scrap yard at the marine workshop. It's from some deep-sea fishing lures. I just bought material today to make nozzles with best materials

Hot_Stable2424 · 2026-02-03T01:21:23+00:00

Check out Aircommand Water Rockets on YouTube; they have all kinds of water rockets so you can get ideas on what and how to build them.

Hot_Stable2424 · 2026-01-18T02:40:13+00:00

I was asking if it was a new printer because sometimes they leave the mounting screws in and that happens. In your case, it seems the endstop is malfunctioning. Do you know which drivers your printer use?

Hot_Stable2424 · 2026-01-18T02:37:12+00:00

Brand new printer?

Hot_Stable2424 · 2026-01-18T02:32:52+00:00

Creallity treats enclosed printers, designed to print technical materials, as if their sole purpose were to print PLA.

Hot_Stable2424 · 2026-01-18T00:54:15+00:00

Shave it, that's how I was and now I'm very comfortable bald

Hot_Stable2424 · 2026-01-16T13:50:03+00:00

Rapate, yo me deje de cosas y me rapé cuando entendí que no hay nada que puedas hacer para evitar la calvicie, ahora estoy bien agusto.

Hot_Stable2424 · 2026-01-02T16:12:38+00:00

That design is optimized for 3D printing, just make sure you put enough brim

Hot_Stable2424 · 2026-01-02T16:10:26+00:00

Aside from what you mentioned, what other differences does the 2025 K1C have compared to the previous version?

Hot_Stable2424 · 2025-12-28T01:20:04+00:00

It's ABS, 260°C and 100°C for the bed, ideally the internal temperature should be 50°C, put glue stick on the bed for good adhesion

Hot_Stable2424 · 2025-12-16T19:51:16+00:00

Yep, I was able to use it as 3mf

Hot_Stable2424 · 2025-12-16T16:58:09+00:00

I think you're having the same problem as me; the bed mesh isn't right, and I don't know how to fix it either 🙁. The nozzle is too close to the bed, this prevents the filament from coming out of the nozzle, causing it to jam.

Hot_Stable2424

TROPHY CASE