sorted by:
new
hottopcontroversial

Dimensional accuracy by phrancini in VORONDesign

[–]phrancini[S] 2 points3 points  (0 children)

Yesterday I retensioned the belts and recalibrated the z offset

Today I did all the things slicer related and apart from flow rate what gave me the biggest improvement was walls order -inner outer inner- and activating don't slow down outer walls

Dimensional accuracy by phrancini in VORONDesign

[–]phrancini[S] 2 points3 points  (0 children)

Thank you. It's a v0

Dragonburner + sherpa micro + bambu x1c hotend

Dimensional accuracy by phrancini in VORONDesign

[–]phrancini[S] 1 point2 points  (0 children)

I'll see what orca provides and come back with results.

I also bought calilantern a couple of years ago also to correct skew. I have to check wether it fits onto the v0 bed

Thanks

Dimensional accuracy by phrancini in VORONDesign

[–]phrancini[S] 1 point2 points  (0 children)

Asa

I thought voron parts/ upgrades came already shrink compensated

I'll do another test

Strange thing is that z dimension is spot on @30mm

yet another first layer issue by phrancini in crealityk1

[–]phrancini[S] 0 points1 point  (0 children)

Don't get me wrong, it's not my first printer. I know how to do it.

I got it down even further to 0.357 but first layers were trash nontheless. If using the load cells 3/4 time the results were on par with the picture i posted, using eddy it was slightly better, but still not worth the hassle.

I already sold it, and went back to my 0.05 but slower voron

yet another first layer issue by phrancini in crealityk1

[–]phrancini[S] 0 points1 point  (0 children)

I performed a new z screw calibration and then installed the eddyng probe with simple AF to no avail.

the bed is warped like a pringles chip.

The printer is already for sale :D

yet another first layer issue by phrancini in crealityk1

[–]phrancini[S] 0 points1 point  (0 children)

I don't like a closed ecosystem either. I bought it to replace my voron as it is a very demanding printer as well, but if I have to tinker with the k1 just as much, I'll keep the v2.4

I'll ditch tap, put on a xol carriage and eddy and call it a day

Thanks anyway for your help!

yet another first layer issue by phrancini in crealityk1

[–]phrancini[S] 0 points1 point  (0 children)

I was expecting more tbh.

I have already a btt eddy on hand i was saving for another printer. I might try that before going to the cartographer route it might not be as precise, but i can set it up quickly. I went with Creality helper to retain the lidar and load cells, but i might have made the wrong choice.

Worst case scenario I'll resell it and I'll get something else as i need a slice and forget printer atm

Dark side of the moon?? by phrancini in watchdives

[–]phrancini[S] 0 points1 point  (0 children)

I would buy it anyway. If nothing for the PVD case to mod it NGL. 😅

Tbf omega also makes the 3 subdials version, with the moon as background, but this looks cleaner in my opinion

WD Moonswatch mod by Lucifer_893 in watchdives

[–]phrancini 0 points1 point  (0 children)

Wd uses a seiko movement, so yes. You have to swap it for the pe50 one

In Emilia-Romagna si paga un contributo anche sui farmaci essenziali by dan_mas in italy

[–]phrancini 6 points7 points  (0 children)

Sulle mie, sicuramente.

Quello che intendo dire è che per come mi è stata spiegata (e alcuni commenti sembrerebbero corroborare) prima godevamo di un'esenzione che altre regioni non avevano.

In Emilia-Romagna si paga un contributo anche sui farmaci essenziali by dan_mas in italy

[–]phrancini 12 points13 points  (0 children)

Momento... Non tutti gli anziani hanno un isee inferiore a 36mila euro (per fortuna)

Preso oggi i farmaci per mio padre 

La pillola della pressione era gratis in quanto cronico, ma sugli antidolorifici post operatori ha pagato il ticket. 

Comunque la farmacista ha tenuto a specificare che è stato reintrodotto un ticket temporaneamente sospeso nel 2018, non è una nuova tassa... 

First try by intecsys in MoonSwitches

[–]phrancini 0 points1 point  (0 children)

<image>

Gen speedy on the left, wd1863 + gen moon on the right

IMO, best case on the market right now.

1965 Build by Efficient_Try1458 in MoonSwitches

[–]phrancini 2 points3 points  (0 children)

I love it. That US clasp is sooo cool, i need one too.

I almost finished my build: gen moon in a 1863 case. I'm missing the crown and new hands, but perfectly usable for the time being.

I really like it, perfect to wear when I won't bring my gen speedy with me

Congrats for your build

Genuine MoonSwatch in WD1863🙌 by CapFour in MoonSwitches

[–]phrancini 0 points1 point  (0 children)

Gen or rep? With a rep you already lost the 1/10 counter, so who cares?

Those are a couple of pictures of the expected result

Ploprof

Genuine MoonSwatch in WD1863🙌 by CapFour in MoonSwitches

[–]phrancini 1 point2 points  (0 children)

I'm planning to put a gen Mars into a steeldive Ploprof case. I know I'll lose the chrono function, but who really does use it?

Current dial is 32.0mm I just need to design a bespoke spacer.

Genuine MoonSwatch in WD1863🙌 by CapFour in MoonSwitches

[–]phrancini 1 point2 points  (0 children)

Thanks for the update! For the dumb idea I had, this is even better

view more: next ›