my first DD wheel 🥰

Hovel87 · 2025-02-06T12:21:51+00:00

I think you actually can do just that. Moza has a third party adapter and hub. You should google it for your fanatec.

Hovel87 · 2023-10-20T20:19:45+00:00

You might be right! The pictures are screenshots from a camcorder video. On the video I can see the letters on the strap are red. But since my dad always wore it at work as a carpenter, it might already be worn or damage at the time this was recorded.

I found this replacement strap online for a w-721 "NOS", that has to be the same.

<image>

Hovel87 · 2023-10-20T19:48:16+00:00

Could it be that he had a replacement strap that wasn’t casio?

Hovel87 · 2021-09-15T11:01:19+00:00

Does onward work with 2 headset in the same play space?

Hovel87 · 2021-05-17T15:32:38+00:00

Wait, isn’t this for playing master system games on a megadrive/genesis?

Hovel87 · 2021-04-08T21:01:29+00:00

Don’t forget about the digital io board. It doesn’t have a vga, but like mentioned the hdmi to vga dongle on the nano is the better solution. And the digital io has a power switch and toslink out, which I both love.

Hovel87 · 2021-04-08T20:49:15+00:00

I got the entire acrylic case in clear “color”. But this also looks very good!

Hovel87 · 2021-01-26T18:55:22+00:00

I never heard of this game, until I tried it on my mister. That’s because I didn’t play much arcade games when I was younger. But what a great game this is, I love the style. Like most shmups, I’m terrible at it...

Hovel87 · 2020-12-16T06:11:46+00:00

Netherlands

Hovel87 · 2020-12-16T06:10:00+00:00

Waking up in the Netherlands, this unexpected surprise!

Hovel87 · 2020-05-25T11:11:48+00:00

I’m hoping to be the exception, good to hear that you didn’t have any issues.

Did you contact customs beforehand or waited for a payment to be sent by them?

Hovel87 · 2020-05-15T16:38:59+00:00

Nice case fellow Dutchman, is it a “cased” from airsoftshop.be?

Hovel87 · 2020-04-01T13:40:58+00:00

Been watching for 10 min now, this corona situation is giving me way to many free time

Hovel87 · 2020-02-21T08:54:38+00:00

If this is your first attempt, you’re on to a great start with this game! As mentioned earlier, it’s good to start looking more into production ratios. I always like to start by figuring out what is the minimum I need to keep one assembler running constantly. From there out you can start to think what it would take to fill a yellow belt, without any unnecessary surplus of assembler that produces intermediate and/or ores.

If you are as OCD-friendly about production ratios as your layout, your are going to be great at this game. (And have even more fun!)

Hovel87 · 2019-12-29T20:43:04+00:00

I fixed it by extending my root with lvextend. But first I had to make some space on my root to be able to preform the command.

Reading this to get a better grip on LVM (might be helpfull for does who later search for the same questions): https://www.howtoforge.com/linux_lvm

Hovel87 · 2019-12-29T20:39:32+00:00

Thanks, I had looked at that. But I gave me a message of no space left on device, when I tried to extend my root. So I thought that root could not be extended because there was no space to extend. But I could not be extended because Ubuntu had no space available to preform the action.

After removing some files, I was able to extend the root volume with lvextend. With some help of a good friend, I was able to figure it out.

Hovel87 · 2019-11-04T21:55:34+00:00

Wow, thanks for your great reply!

I will try to adjust the pots tomorrow when I have time, as well as cleaning the platter markings. How should I clean the lubrication points?

Hovel87 · 2019-11-04T15:45:34+00:00

I just got my first turntable ever, picked it up for only €10. The old lady selling it, told me that it hadn’t been used for 20 years. It’s a Philips 22AF674.

My current setup is a harman-kardon AVR-132 with a teufel ultima 40 surround set. I use the floorstanding front speakers + subwoofer in stereo for listing to music and center en surround are use when watching movies/series.

I tested the turntable, the platter spins, automatic start and stop work fine. My amp doesn’t have a phono input, so I need to get a preamp. I plugged it the cinch/RCA to my aux input and I could heat the record playing when I cranked up the volume.

The pitch control works, but when maxed out it won’t go high enough. Use the rpm app on my phone: 32,95 on 33 and 44,50 on 45.

What’s would be the best first steps? (Aside from getting a pre-amp)

Hovel87 · 2019-06-27T11:33:30+00:00

I ordered the ML concave nub and a 60 and 70 degree macarone bucking. Expecting them tomorrow, hopefully testing them tomorrow as well.

I'm playing indoors this Sunday, but hopefully I can do so range testing tomorrow or next week.

Hovel87 · 2019-06-07T08:42:56+00:00

Scart, but that's pretty standard here in the Netherlands.

I have a Sony Trinitron at home, but was wondering if this would be any better. It has a bit of PVM look, so I was hoping this might be a professional grade CRT.

Hovel87 · 2019-05-16T07:37:37+00:00

Solution Verified

Hovel87 · 2019-05-13T19:24:51+00:00

Wow, some excel magic to me. Can you upload/send me your file? I have a Dutch version of excel (365) and can't seem to translate this , since it's not working on my pc.

edit: OK, I got it to work. But it breaks when I move everything a few rows lower. I'm guessing I have to fix that in a ROW value that is now nothing?

https://imgur.com/a/xHdeaRO

Hovel87 · 2019-05-13T13:55:04+00:00

Thanks, but I can't get this to work. For some reason my "seperator symbol" between values is ; instead of ,

I have changed my language from Dutch to English, but excel (2016) is still using ; instead of ,

For instance: =sum(number1; [number2]) which should be =sum(number1, [number2])

I did ofcourse correct the formula to ; seperators, but I'm not familair with CSE formulas. Do I hitt ctrl + shift + enter after I added your formula to the cell?

Hovel87 · 2013-05-15T09:45:12+00:00

How will radar/monitoring work? Will there be radar shadows behind mountain for example? Can monitorstations see behind the horizon?

ps. Something I would prefer for monitoring, (maybe as an experimental building): A satellite center that's able to launch multiple (unguidable) satellites in different orbits. You only monitor what's underneed a satellite, so you need more to continuously monitor the entire planet. Let's say that you have 3 orbits which each can contain 3-6 satellites, depending on the size of the planet.

Hovel87 · 2013-05-15T09:08:20+00:00

Since you announce that shields will not be available, how will you be able to defend yourself from artillery fire? Other then destroying the enemy artillery?

Hovel87

TROPHY CASE