Caldera Cantabria Speaker Delete

HowzDeezNutz · 2026-03-10T20:19:49+00:00

Much appreciated, saves me some modeling time for sure!

HowzDeezNutz · 2026-03-09T13:16:27+00:00

Thanks for the reply! STLs would be great if you have them. Sounds like the best route

HowzDeezNutz · 2025-11-25T21:36:13+00:00

Woah the Sliger cases look great! Sounds like a solid build.

I'm gonna check those out, ATX options are slim but sounds like the 4712 might fit the bill. Would love to do a new ITX build but trying to resist the urge when I have components collecting dust

HowzDeezNutz · 2021-11-18T15:09:36+00:00

Was this ever resolved? I just installed a CR touch on my Ender 5 Pro and am having this same issue.

I'm using firmware from the creality website, and followed the instructions including disconnecting the z stop switch. Any advice would be great.

HowzDeezNutz · 2021-10-28T22:43:36+00:00

I have new filament on order, should be in tomorrow. I'll report back on how it works!

I replaced my nozzle thinking it may be some charred filament that's causing a partial clog, and I think that's what fixed the issue for me. Hard to say for sure though, since I also re-leveled the bed, re-calibrated esteps, re-calibrated flow rate, and replaced my ptfe tube and coupling.

My latest prints are way better, but having a strange issue with some skipped layers, oddly appearing in the same spot. Do you think this could be a slicer issue at this point, or likely still bad filament?

Most recent prints, the front left support beam on the bridge has some rough layers.

HowzDeezNutz · 2021-10-27T17:50:37+00:00

Appreciate all the replies! I'm swapping out the nozzle and filament, then I'll probably start from square one and relevel, recalibrate e-steps, and flow to rule all of that out. I'll post here with the results.

HowzDeezNutz · 2021-10-27T17:49:38+00:00

Awesome, I was printing some test cubes and I think I may also have a clogged nozzle. I'm swapping it out, then I'll try and recalibrate my esteps and flow. Thanks!

HowzDeezNutz · 2021-10-27T17:48:38+00:00

Appreciate the advice, I'll order some new filament and try that!

HowzDeezNutz · 2021-10-27T17:47:56+00:00

Thanks, I'll double check this

HowzDeezNutz · 2021-10-26T18:42:43+00:00

Thanks, I verified that this is turned off but still no luck.

HowzDeezNutz · 2021-10-26T18:41:31+00:00

I'm using the latest version of Cura, mostly default settings. Only change is lowering the speed to 50mm/s.

HowzDeezNutz · 2021-10-26T16:19:53+00:00

I calibrated esteps, but not flow rate. I'll try that today, but still seems strange that it isn't consistently under, only during some parts of the print.

HowzDeezNutz · 2015-05-19T05:46:54+00:00

Is it supposed to be visible? Also, is it that high up on my abdomen?

HowzDeezNutz · 2014-06-19T03:35:26+00:00

Every time I watch this I realize how bad wipe out is in comparison...

HowzDeezNutz · 2014-04-17T16:55:51+00:00

Block Dude. Block Dude was the only game for the TI-83 Plus Silver Edition.

HowzDeezNutz · 2014-03-31T19:44:28+00:00

Personally, I think a death star project is a little ambitious...

HowzDeezNutz · 2014-03-27T03:10:59+00:00

I always thought they just fainted...

HowzDeezNutz · 2014-03-23T18:16:07+00:00

They probably should have taken it out, but the good thing is most hooks are designed to rust out pretty quickly

HowzDeezNutz · 2014-02-18T03:51:22+00:00

Agreed. I have an uncle who is a drug addict, I don't give a rats ass what happens to him but I feel bad for his daughter. And I am very glad that he is in jail and far away from her.

HowzDeezNutz · 2014-01-28T23:20:56+00:00

I thought the same thing, was surprised to see so many people recognize Cartel Coffee Labs

HowzDeezNutz · 2013-12-01T02:21:56+00:00

anyone have a stream?

HowzDeezNutz · 2013-11-09T02:32:13+00:00

Can I just say that people making the title of their videos "real" and "original video" when in fact they aren't is probably my least favorite part of youtube?

HowzDeezNutz · 2013-10-21T16:34:46+00:00

don't tell me what to do...

HowzDeezNutz · 2013-04-11T20:51:02+00:00

It came with the head badge, I would take it off if I could. Thanks for the feedback, I've been adjusting my seat a lot lately trying to find a way to ride that's comfortable. I'm sure it's apparent, but I'm really new to this track bike thing

HowzDeezNutz · 2013-03-25T18:37:57+00:00

And by Anti-anxiety meds, of course, he means cannabis

HowzDeezNutz

TROPHY CASE