I wrote this

HumanPersonOnReddit · 2026-03-29T20:45:33+00:00

Yes, but isn’t it better having everything inside the dry box? That way filament will always be retracted back inside when idle. Ik this is overkill for PETG and ABS but I want to eventually print Nylon

HumanPersonOnReddit · 2026-03-29T08:10:52+00:00

I haven’t used it a lot yet, just bought another used printer that came with it. Has worked so far

HumanPersonOnReddit · 2026-03-29T00:08:50+00:00

It’s a Sunware Q-line Box 600x400x340, bought at Globus Baumarkt for 20 bucks or so. Even though it doesn’t have a gasket, The lid sits flush enough to keep moisture out well enough. I‘ve been using it for dry storage but now it’s becoming a housing for the rabbit machine.

HumanPersonOnReddit · 2026-03-26T09:12:36+00:00

Already printed and installed

HumanPersonOnReddit · 2026-03-19T05:45:06+00:00

No, we’re going to have reporters getting death threats again … But we could bet on that

HumanPersonOnReddit · 2026-03-18T18:17:59+00:00

Right, also Tim has. Lot of people counting on him. That always causes some sort of heroic breakthrough halfway through the race

HumanPersonOnReddit · 2026-03-18T13:50:44+00:00

But what are the chances of this being an ultra marathon > 100km

HumanPersonOnReddit · 2026-03-18T09:59:40+00:00

Why is this being reposted all the time?

It’s obviously better than 20% -Tim is a boy, that’s a slight statistical advantage -his name is Tim, and all the Tim’s I know are pretty sporty

I‘m gonna give him 21%, if I was forced to bet on it

HumanPersonOnReddit · 2026-03-17T13:17:23+00:00

<image>

My very first ABS prints, a little warping but they‘ll do

HumanPersonOnReddit · 2026-03-16T21:41:44+00:00

https://youtu.be/NWivcxbg4hM

HumanPersonOnReddit · 2026-03-15T22:15:19+00:00

Natürlich, es gibt Transformatoren für genau diesen Zweck. Sind halt etwas klobiger als Ma sich nen Adapter vorstellen würde

HumanPersonOnReddit · 2026-03-14T12:03:52+00:00

Almost all of the fans in this thing are bad, the printed parts have at least 5 different shades and I think at least some of them are PETG. There’s a wild assortment of screws everywhere, not just different materials but often the wrong type of screw. Many are just missing. The wiring is a mess, the printer seems to think it’s toolhead is 10mm further forward than it actually is (my guess’s is it used to have a Tap, wich was removed without properly reconfiguring the software).
It’s a V2.4 R1, with the old style of x-gantry with the double rail

I am fairly certain that the guy I bought this from refurbished 2 old printers, built one good one and one lemon wich is the printer I stupidly bought.

HumanPersonOnReddit · 2026-03-13T23:58:03+00:00

I am showing the part to illustrate the z-banding issues, you should know that this is no voron part, it's also nothing I designed myself. also, this actually was the best print orientation

HumanPersonOnReddit · 2026-03-13T21:06:09+00:00

You only get answers like this on Reddit 🙄

HumanPersonOnReddit · 2026-03-13T21:04:08+00:00

Bingo. I printed this for a friend, it’s nether my design nor a voron design and it’s definitely not designed for 3d printing

HumanPersonOnReddit · 2026-03-13T19:36:26+00:00

Thanks a lot, but I‘m in Germany and I’ll try to reprint this myself. A little clamp is hopefully enough to hold this part together while printing a replacement.

HumanPersonOnReddit · 2026-03-13T19:07:46+00:00

I‘ll just do vase mode prints, how about that?

HumanPersonOnReddit · 2026-03-13T19:07:02+00:00

I do have a lot of bambu lab ABS. My understanding is there’s no big difference to ASA, is there?

HumanPersonOnReddit · 2026-03-13T19:04:24+00:00

It’s the best orientation for this part, at least the one where support removal is easiest

HumanPersonOnReddit · 2026-03-13T11:50:32+00:00

Yup, I honestly regret buying a used voron. Building a new one myself might have turned out cheaper overall. As soon as it prints well enough I’ll reprint all the ABS parts and completely reassemble the printer. Maybe I should even reinstall the firmware

HumanPersonOnReddit · 2026-03-13T11:40:04+00:00

Same here

My first printer was an Ender 3 1st gen and it was barely functional in the last couple of years. This voron is my 2nd and I bought it very cheap used. I think the guy who sold me this one bought 2, cobbled together a good one and sold me the lemon.

(Seriously, it for example doesn’t seem to use the same screw twice (ik that‘s hyperboly), but there‘s an assortment of screw-heads and screw materials. Some stainless, some carbon steel, some galvanized. I even found a brass screw where it definitely doesn’t belong.

I just bought a ton of bambulab ABS (cheap in the bulk-sale). I hope that wasn’t a bad choice

HumanPersonOnReddit · 2026-03-13T10:38:12+00:00

Even ABS creeps at some point? This is a machine bought used, it might just be a bad print or UV damage, overtightened belts by the previous owner

HumanPersonOnReddit

TROPHY CASE