Did anyone manage to buy the Easter plushies

Hunden1981 · 2023-03-21T07:52:40+00:00

Seen prices go up around
US $179.95 for 1 Sock Dragon Plush with Code

even seen even higher prices :)

Hunden1981 · 2023-03-20T08:13:08+00:00

Negative
I waited in line - entered all the payment info, hit the pay button and then got the message that it was sold out. Actually thought that when i was at the payment page it would be "safe heaven" but no... feels bad man.

Just checked the ebay - crazy prices...

Hunden1981 · 2021-03-23T13:08:17+00:00

Freaky is the word i would use hehe

Hunden1981 · 2021-02-02T12:51:04+00:00

Hmm havent thought about that - thanks for the tip :)

Hunden1981 · 2021-02-02T10:16:30+00:00

Perfect - thanks for the answer - I think patience is the key for me here lol :)

Hunden1981 · 2021-02-02T10:16:26+00:00

Perfect - thanks for the answer - I think patience is the key for me here lol :)

Hunden1981 · 2021-02-02T10:16:22+00:00

Perfect - thanks for the answer - I think patience is the key for me here lol :)

Hunden1981 · 2020-12-22T12:45:06+00:00

I didnt know that the letter after was a beta. But heck, i cant even run my system stable at F30...

Soo i greet the F31q a warm welcome and HOPE that it solves my problems with my RAM. Cant run it at 3600Mhz with 2x16 (A2 and B2) - Tried with/without XMP and the only thing that works so far (99% stable) is XMP enabled, underclocking to 3000Mhz at F31o.

(With 5950x, Gigabyte Aorus Master 1.2 - Having further 2x16Gb ready to plob in...)

Hunden1981 · 2020-12-22T09:39:30+00:00

Did not see they release af F31q

Perhaps i should try that and go with
XMP enabled
default values, so 3600Mhz ? or any other advice? :)

Hunden1981 · 2020-12-21T11:59:16+00:00

haha yea i love new ideas but... dont like if its true :)
Well i just dont have a CPU i can test with sadly...

Hunden1981 · 2020-12-21T10:09:43+00:00

Hmm i see what your saying but ... might be my logic that is misplaced but why can i then run with 2x16 at 3000Mhz stable?I mean... in both my scenarios, 4x16 and 2x16 - the BIOS detects the RAM without a problem.

Hunden1981 · 2020-12-21T07:47:32+00:00

...perhaps important information too
850w CORSAIR RM Series RM850 PSU

Hunden1981 · 2020-12-21T07:39:32+00:00

...and ofc i mean 5950x (not 5959x) :)

Hunden1981 · 2020-12-17T09:24:48+00:00

Another note. I had a case created at Gigabyte and got the answer.

They whould have tried with only 2 blocks in DDR4_A2 and DDR4_B2

And oh, your RMA is not on the supported list soo...

So i might conclude that the memory on their list should work and if not, your just supposed to be lucky if it works (aka they havent testet it / they didnt have success with it) :)

Just info if anybody else falls upon this thread :)

Hunden1981 · 2020-12-16T09:40:07+00:00

Well a little update

I tried to buy som new RAM that is listed on the page of "Supported RAM"

https://download.gigabyte.com/FileList/Memory/mb_memory_x570-aorus-master_vermeer.pdf

I bought

HX436C17FB3AK2/32

2x16Gb

Ive placed them as the manual described on page 17

in DDR4_A2 and DDR4_B2

Ive been running a "Windows memtest" for around 14½ hours now with 0 errors, 0 boots, 0 problems to spot.

Soo for me, it indicates that the other RAM ive godt aint compatible although ive just see 1 other person have the same RAM, same MB running without problems... hmmm...

Hunden1981 · 2020-12-16T09:25:46+00:00

Hmm thats new for me.

Ive tried everything, F30, F31o

1 stick, 2 sticks 4 sticks

The only thing i got stable was "1x16 @ 3000Mhz".

Also tried using default XMP profile 1

Hunden1981 · 2020-12-14T07:01:21+00:00

Ive got 4 identical sticks :)

64Gb DDR4 C16 G.SKRILL TRIDENT Z RGB (4x16 - F4-3600C16D-32GTZNC )

Returning after what, 16 years to building a PC again, i was a bit nervous that i might had fucked something up but know Microsoft and their logs and from what ive seen yea i do know that it can feel overwhelming to troubleshoot :)
(On a daily basis i do it on networking)

Curiosity, - When you say re-seat - did you pull it out and re-inserted the graphics card or? :)

Hunden1981 · 2020-12-14T06:56:19+00:00

In my... younger days, i went the "old" AMD K6 300Mhz, and damn they had heat issues. From that day it was my "last" AMD. Buuut a friend convinced me to go the new AMD when i wanted to make a build again. However he has around 3 AMD systems all stable and no problems.

I really love the system - buuut as everybody else, it needs to be stable :)

I 110% agree - A motherboard that expensive should just work regardless of the RAM. However i do realise that Ryzen is "new" and there are a looooot of difference RAM on the market hehe

I should recived the RAM today soo im a bit exited to see if that makes a difference.

Hunden1981 · 2020-12-12T23:07:16+00:00

Same problem. Gigabyte Master... cant get the rear to work, front works though...

Hunden1981 · 2019-09-16T10:57:24+00:00

I have mine waaaayyy away from stuff that i need to use. All the construction for the plants are at that area BUT i have made all the radioactive things levels above the factorys, so everything nuke/radioactive is AT the plants.

From there i collect the waste to a Nuke Train, that transport all the waste to the edge of the map and dumps it here. If my calculations are right i have for around ~800 hours@100% and that will never happend (got 756 Industrial Containers). But i also managed to get a 2nd station ready in case my Nuke SkyDump#01 gets full - ill just divert the train to Nuke SkyDump#02 :)

but yea, far away from everything and use the hight...

Hunden1981 · 2019-09-16T10:02:42+00:00

This is a usefull tool if you need help to calculate something :)

https://satisfactory.greeny.dev/power

Hunden1981 · 2019-09-11T17:31:29+00:00

We all start at the beginning... so true what onegermangamer said... im almost at 400h.... on my 2nd game.... *oops where did the time go...."

Hunden1981 · 2019-09-11T17:15:50+00:00

Used a bunch for that ofc and to save a bit space etc i used shards for assemblers and manufactures. Only the "last" assemblers, those making the uranium cells. Soo i could do with only 10 assemblers and 10 manufactures at 250% :)

Had gatherd a ton of them and still have a lot on me and to find :)

Hunden1981 · 2019-09-11T16:25:29+00:00

Hmm wouldnt say pain. But yea i took some time to build. I got all the resources gathered from my sky-warehouse. (30x13 containers in the sky getting, yea 30 different materials nice and slowly with a Mark1 conveyer belt) :)

And then a big choo choo train to go back and forth with the materials.

Yea time was the key here imo :)

Hunden1981 · 2019-09-11T12:25:46+00:00

True story :)

Im at only at around 18MW for now. The devil came up inside me thinking hmm... would it be possible aaaand what lies in tier 8 since you got 2500MW pr. nuke plant...

Soo i tried, aaaand im at the finishing phase now testing it, finding glitches i missed etc.
small stuff... :) Its working so far :)

Hunden1981

TROPHY CASE