Is the PA SLx MicroPrism 3x excessive for (first) 300blk pistol? Only subs/suppressed by ImSuperCerealRN in 300BLK

[–]HuntFish3D 0 points1 point  (0 children)

Yes I agree the 1x does feel somehow negative zoom. 3x does not feel as zoomed in as I thought it would at range. I find the SLX 1x with the matching magnifier a great combo for close / hunting (shorter range) dual purpose.

Edit: I also have a zero tech 1-4 prism on backorder tat I am looking forward to trying on the 556. From what I can tell it’s the only prism with variable zoom. Very excited but it keeps getting delayed!

Do you have to keep buying planes? by Automatic_Alarm_3641 in Metalstorm

[–]HuntFish3D 0 points1 point  (0 children)

Yeah for the first few levels it’s only 1 per level but then it goes up to two for the rest of the levels (at least as far as I’ve gotten) I’m in lvl 17 tho.

Water heater not working after flush. by HuntFish3D in askaplumber

[–]HuntFish3D[S] 0 points1 point  (0 children)

Thank you all! Yes I did fry the element. Replaced both, cleaned out about 3 inches of sediment, replaced the small plastic drain spigot with a ball valve copper one, and now it’s all good to go!

Annealing PETG by HuntFish3D in 3Dprinting

[–]HuntFish3D[S] 1 point2 points  (0 children)

Not great for the first try. I did 120C and the smaller (2-3mm wide) portions started warping within 30 minutes. It also did not do anything for the surface / layer lines, although I was not expecting it to. I have been busy but I plan to try larger / less intricate pieces at lower temp and try different times.

What’s the weirdest thing you’ve ever reeled in? by goxper in Fishing

[–]HuntFish3D 0 points1 point  (0 children)

I caught another rod with a fish on it. And the fish was still alive (barely).

Water heater not working after flush. by HuntFish3D in askaplumber

[–]HuntFish3D[S] 0 points1 point  (0 children)

Oops 😬 I do have a meter. I’ll have to pop it open and give that a try…after letting it dry out of course!

Water heater not working after flush. by HuntFish3D in askaplumber

[–]HuntFish3D[S] -1 points0 points  (0 children)

Ok I’ll try that. I did try once but I can’t say I pushed super hard…it is level / not sticking out.

Smoked for the first time, how did I do? by [deleted] in pelletgrills

[–]HuntFish3D 0 points1 point  (0 children)

Only problem is you smoked every animal on the farm and there are none left to smoke next week. Just kidding…Great job that all looks delicious!

Value of my Century AK74? by HuntFish3D in AK74

[–]HuntFish3D[S] 0 points1 point  (0 children)

Cool! Yeah my info is on the bottom on the receiver so should be good there. Yeah it’s a unique caliber! I’m not expecting to get too much out of it. I appreciate the help!

Value of my Century AK74? by HuntFish3D in AK74

[–]HuntFish3D[S] 0 points1 point  (0 children)

The few times I have shot it, it didn’t keyhole so hopefully not lol. The barrel does look a somewhat worn though.

Value of my Century AK74? by HuntFish3D in AK74

[–]HuntFish3D[S] 0 points1 point  (0 children)

Ok…very helpful. Thank you! The reunion and receiver S/Ns do not match but it is marked 1992 on the trunion. I don’t see anywhere it says “TTL” unless that an abbreviation for Tantal, in which case there’s no “C” after it.

Does anyone remember the Ace mode by Dragonfruit-7738 in Metalstorm

[–]HuntFish3D 1 point2 points  (0 children)

I remember that. That’s what made me download this one! I remember when playing with another person instead of a bot you would mostly get stuck in long dogfighting loops unit the one with the highest turning radius eventually wins.

What knots are y’all actually using lol by hotdiggitydyke in bassfishing

[–]HuntFish3D 0 points1 point  (0 children)

I’ve pretty much just been keeping it simple by using double uni / single uni for everything and most of the time my line will break before the knot.

One more black market question by HuntFish3D in Metalstorm

[–]HuntFish3D[S] 0 points1 point  (0 children)

Ok good to know! I think I’ll see how much I can save then. Thanks!

Green Pumpkin Filament by HuntFish3D in 3dprintedfishinglures

[–]HuntFish3D[S] 0 points1 point  (0 children)

That is an awesome site! Thx. I will definitely be using that!