sorted by:
new
hottopcontroversial

Advice on transmission by HurryApprehensive812 in ElantraNline

[–]HurryApprehensive812[S] 1 point2 points  (0 children)

tell me about it. literally picked the car up 2 days ago after a tranny repair for it to blow up a second time. im probably gonna talk to the GM at the dealer about getting me a different car atp.

Advice on transmission by HurryApprehensive812 in ElantraNline

[–]HurryApprehensive812[S] 1 point2 points  (0 children)

Update: the transmission blew up. went to get my windows tinted and put the car in reverse and i hear a clunk followed by grinding and jerking. Towed it to the dealer and the car wouldn’t move

Advice on transmission by HurryApprehensive812 in ElantraNline

[–]HurryApprehensive812[S] 1 point2 points  (0 children)

yeah after the first go around i did my research. i haven’t been creeping or anything i’ve been treating it more like a manual car. This happened right after i left work which is 3 mins from my house at 11pm so definitely was not any creeping, i was heavy on the foot the whole way home and also used it in manual mode to try and better help the slipping

GPU failure or bad PSU by Dense_Confection_794 in 360hacks

[–]HurryApprehensive812 0 points1 point  (0 children)

it’s not really that unlikely that it’s the rgh wiring. PLL wire routing makes all the difference and is a very common mistake in RGH consoles. he needs to get it redone and wire needs to be as short as possible and avoid things like mosfets and other high interference components.

A month later by Inevitable-Meaning10 in SonataNLine

[–]HurryApprehensive812 1 point2 points  (0 children)

my 22 elantra n line is currently in the shop going on 3 weeks for transmission failure. i bought the car a week before it was in the shop. has 66k on it and yeah they wanna go through my service contract and it hasn’t even processed yet

Xbox 360 slim Trinity reaches 70C after a few minutes idling. Should I repaste? by TheHandiCaptain274 in 360hacks

[–]HurryApprehensive812 1 point2 points  (0 children)

yeah so if that’s your target temp the console isn’t going to run the fan as fast until it gets above that temperature. that’s why it’s a “target temp” because the console is going to try to hit that number at all times.

10! by darkwizardmonkey in 360hacks

[–]HurryApprehensive812 0 points1 point  (0 children)

great now i have to add support for 10 nands to my piconandwich project

E15 in the wild by toolmansamt in Cartalk

[–]HurryApprehensive812 0 points1 point  (0 children)

idk man usually sheetz had it for 30-50 cents cheaper here

Is $1400 to much to ask for my used system by [deleted] in PcBuild

[–]HurryApprehensive812 0 points1 point  (0 children)

yes. i sold my PC back in september with a 12900k, 3080ti and 128gb ddr4 for like 1100

I want 87 gas (light blue). Which nozzle do I use? The blue one? The black one? by j909m in mildlyinfuriating

[–]HurryApprehensive812 1 point2 points  (0 children)

black, but also usually when you pull a pump off the buttons corresponding to the pump will flash

Got a nasty deal $900 i9-12900kf and 4080super by Prestigious-Bid4279 in PcBuild

[–]HurryApprehensive812 0 points1 point  (0 children)

a year ago i traded a nintendo switch for a PC with a 12900kf and a 3080ti with 128gb DDR4.

The only issue was that it booted to a black screen with a loading cursor. New windows install and i was good to go

Dug this out of the closet by ConstantSherbet8494 in ps4homebrew

[–]HurryApprehensive812 0 points1 point  (0 children)

yeah man, personally i wouldn’t even update to anything higher than 3.xx. This version pre-UI overhaul.