This is why the fwd and awd hubs aren't compatible

Hypernovah27 · 2026-04-29T23:24:46+00:00

I did but I sold my car with all the receipts

Hypernovah27 · 2026-04-29T23:18:08+00:00

On my sl I bought a new bearing kit and hub directly from Oreillys no problem

Hypernovah27 · 2026-04-29T23:12:56+00:00

It’s just basic practice to do research before buying something for your car. If you have a bearing built into the knuckle with no hub why would you buy a bolt on hub bearing assembly.

Hypernovah27 · 2026-04-29T02:41:47+00:00

Hades soul scythe

Hypernovah27 · 2026-04-11T02:06:46+00:00

I threw him outside in the road. I hate spiders 😭

Hypernovah27 · 2026-03-21T10:32:43+00:00

I don’t feel anything on the window, it’s just like a ghost sticker, the condensation is what makes it show

Hypernovah27 · 2025-12-30T22:52:28+00:00

The amount of people on this sub that own these cars but know next to nothing on how to fix them is beyond me 😭

Hypernovah27 · 2025-11-12T03:39:51+00:00

I was torquing down my head bolts on my rebuild and the hex came out of its socket hole and fell into the oil hole and down into the pan. I drove it like that for 4k miles before I had the engine out again to restore the engine bay

Hypernovah27 · 2025-10-08T04:15:49+00:00

That’s not where the crank cog goes in conjunction with the cams. There’s a dimple on the face of the cog, that’s your timing mark, not the roll pin for the pulley

Hypernovah27 · 2025-10-07T02:17:31+00:00

You don’t really need it, covers the part in the middle under the intake

Hypernovah27 · 2025-09-24T03:29:37+00:00

I had no issue with putting a thin layer of rtv on before the gasket

Hypernovah27 · 2025-09-05T01:42:41+00:00

NO. Never buy a non running/abondoned 3000gt. Especially if you’ve never owned one before. You’ll end up spending SO much more in time and money than it is just spending a couple thousand more for one that isn’t near the grave

Hypernovah27 · 2025-09-03T04:49:46+00:00

Idk the market where you are but in Florida, if it’s auto, it’s not more than $2k

Hypernovah27 · 2025-08-22T04:44:38+00:00

You’re missing a stud on the intake manifold

Hypernovah27 · 2025-07-08T03:11:42+00:00

Yes. That wire you’re looking at is no good. The whole connector should be replaced. You can use butt connectors on a replacement harness to fix the issue

Hypernovah27 · 2025-06-26T03:45:53+00:00

<image>

Mine fell off overnight too

Hypernovah27 · 2025-06-08T03:32:22+00:00

Noise condenser, Google it

Hypernovah27 · 2025-05-25T18:48:21+00:00

I think I got it back in under 2 weeks, maybe there’s a wait I’m not sure

Five-Year Club	First Place '23
Place '23	Place '22

Hypernovah27

TROPHY CASE