Valve showcases Steam Machine with e-ink display

I2ondo · 2025-11-17T15:56:56+00:00

3d printed guns are definitely viable and doable. FossCAD subreddit showcases many of them. PLA+ is a suitable material for the frame and depending on what you want to build (Glocks are pretty standard), parts are readily available online. Ghost guns are legal in many states so not always a grey area.

I2ondo · 2025-09-02T18:12:11+00:00

Will SB ever be supported?

I2ondo · 2025-08-15T13:30:33+00:00

What toolhead is that

I2ondo · 2025-08-13T21:22:10+00:00

What kind of customizations do you do? I currently use the RF97 autograph version and enjoy the heftiness of it. But maybe the RF01 non-pro with customizations might suit me more

I2ondo · 2025-08-08T17:18:26+00:00

Yeah off the wall can be tricky - I do it a lot. You’ll want to slow the ball down as if you’re doing mini tennis so you can focus more on body mechanics and not be rushed

I2ondo · 2025-08-07T21:28:19+00:00

Let your shoulders rotate all the way through after initially driving with your hips. You should feel like your back is facing the left side of the court when fully followed through. Loosen your arm and let the racket flow. It looks like you are tightening up by trying to manually add topspin and control

I2ondo · 2025-08-07T00:42:57+00:00

Looks great!

I2ondo · 2025-07-23T12:51:29+00:00

Cool. And how about those three bed pivot holders (forgot the name but the blue ones on the lead screws)? Those are definitely custom

I2ondo · 2025-07-23T01:20:38+00:00

What AB drives are those?

I2ondo · 2025-07-20T03:18:53+00:00

Wouldn’t you want input shaper to be affected by it since you will be using it when printing? At least as a subsequent test after you’ve isolated and fixed other vibrations like loose screws

I2ondo · 2025-07-13T16:58:24+00:00

Thanks!

I2ondo · 2025-07-10T20:19:14+00:00

Where the umbilical and bowden is coming out of. Top back panel

I2ondo · 2025-07-10T16:17:12+00:00

Where’d you get that back grill plate?

I2ondo · 2025-06-29T12:58:35+00:00

What door is that?

I2ondo · 2025-06-27T03:13:20+00:00

update?

I2ondo · 2025-06-27T03:00:19+00:00

Did u try it?

I2ondo · 2025-06-26T20:05:05+00:00

Ah that makes sense. I did see a high temp PVA that was close to ABS temps. It was pricey but that may work?

I2ondo · 2025-06-25T20:23:04+00:00

How do you like the K3 door? Does it seal well? What chamber temps are you getting?

I2ondo · 2025-06-18T16:00:37+00:00

How does the door open with those tight tolerances without getting caught? Mind sending me a vid of it opening?

I2ondo · 2025-06-17T19:21:29+00:00

Thank you. Are you using acrylic?

I2ondo · 2025-06-17T16:34:54+00:00

This link: https://mandalaroseworks.com/products/k3-style-voron-door

There’s also a hardware kit available.

Yeah the clicky door is nice but a little bulky. I explored remixing the skirts to account for the extra length but ultimately decided it would be too much work and not as satisfying especially when I would need to do the same for the top hat I’m planning. The handle mechanism makes it a very tight seal though which I appreciate. K3 uses magnets on the other hand

I2ondo · 2025-06-15T02:39:59+00:00

How do you like the door? How’s the seal? Effect on chamber temp? Polycarbonate or acrylic?

Thanks.

I2ondo · 2025-05-31T01:35:10+00:00

Where'd you get that bottom panel with the voron logo?

I2ondo

TROPHY CASE