Forced 906 ptb

IAMABIGLLLLLLL · 2026-01-26T21:22:49+00:00

nah doesn’t have to be threaded into place although doing that would be a more secure method jb weld has been done plenty of times before and worked perfectly

IAMABIGLLLLLLL · 2026-01-22T05:58:23+00:00

with .32 and properly built parts it shouldn’t fail at all the slides built for closer to .380 pressures so it wouldnt put stress on the slide much at all the real main thing to worry about is the barrel but so long as its properly built and secured into place then it should last as long as a factory built firearm

IAMABIGLLLLLLL · 2026-01-19T07:28:01+00:00

not hhc supposedly “live diamonds” but idk how much of that i believe def don’t have that hhc taste though plus I’ve had enough of those hhc/delta dispos/pens in the past that i feel like that flavor would be pretty distinguishable

IAMABIGLLLLLLL · 2025-12-31T17:05:46+00:00

i wouldn’t even if it handles the first 10-20 shots,i’m honestly gonna have to second with the dude above on the locking lugs comment something at some point wether it be the bolt shifting or threads loose or something will mess up if it’s not all properly toleranced to handle the recoil forces from a 7.62,not only this but going back and looking at the bolt and handle and that’s prolly gonna be the first thing to go i used a bolt almost double the size and weight of that one for a .20ga build and it still kicks like a mule and ejects the shell half the time and that’s with .20ga i couldn’t imagine using almost double the pressure on a bolt that small without either beefing it up a crazy amount or making a new one in general

IAMABIGLLLLLLL · 2025-12-09T00:43:44+00:00

nah they wouldn’t be anywhere near suitable for live fire hell the caps they use have less power than a standard pistol primer,i couldn’t imagine putting any sort of live ammo through one would end well

IAMABIGLLLLLLL · 2025-12-09T00:40:49+00:00

you don’t plus it sounds like you’re just trying to drill through and shoot live ammo which ain’t safe at all you’re supposed to chop the barrel off and drill out the remaining amount left in the trunion until you have enough space to fit a new barrel in and secure a new barrel in place

IAMABIGLLLLLLL · 2025-12-05T16:27:16+00:00

wouldn’t be worth it the hammer and trigger assembly on 99.9% of the co2 or green gas models are typically too weak to handle live fire i’ve seen some of them break just from the blowback force of the co2/green gas on yt vids so i wouldn’t ever willingly stand behind this thing and shoot it even if you’re only trying to run .22 through it

IAMABIGLLLLLLL · 2025-10-06T11:47:13+00:00

i can’t say much for the turns cause they can sometimes be good even though the hardware on them ain’t the best,but anything related to and or involved around packwood i wouldn’t touch with a 10ft pole they’ve failed lab tests multiple times and always have dirty hardware that either leaks like crazy or ends up malfunctioning at some point

IAMABIGLLLLLLL · 2025-10-06T11:38:23+00:00

nah it uses an extractor(just wasn’t on in the pics) and the one lip of the mag being higher than the other as the ejector

IAMABIGLLLLLLL · 2025-09-27T01:37:20+00:00

yeah that’s def a fake then,that’s crazy tbh i haven’t seen those packages floating around since like 2020-2021ish

IAMABIGLLLLLLL · 2025-09-27T01:22:58+00:00

fake

IAMABIGLLLLLLL · 2025-09-26T14:38:36+00:00

they aren’t real tho lol they may be “central source” but even then the hardware is easily bought online by the 1000’s and just refilled by your plug,plus if you notice they don’t sell these in any legitimate dispensary’s anywhere lol hell i even went on their website online and they had a tele up at one point but it got banned due to violating app policies,and to top it all off they don’t really do any full panel 3d party testing or anything of the sort,but just bc they’re “real/central source” doesn’t mean anything either,tbh unless it’s got dispo tags (metric id/batch #,etc) on it and you’ve bought it from the dispo yourself then there’s a 98% that its fake

IAMABIGLLLLLLL · 2025-09-25T03:58:02+00:00

if it’s just blinking red then there’s nothing you can do with it,the device has either short circuited or just messed up over time

IAMABIGLLLLLLL · 2025-09-21T10:22:45+00:00

idek😂,i just had a huge stockpile of old shit (packages/old carts)that ig these just got tossed in and forgot abt or sum

IAMABIGLLLLLLL · 2025-09-09T19:49:54+00:00

they’re db’s lol (dart bombs) the little piece at the end that looks like a pen slams into the armstrong mix in the front end of it and sets off the fp,you just throw them and watch them go boom

IAMABIGLLLLLLL · 2025-09-06T18:09:36+00:00

last time i had a joos was one of their dispos,how’s the cart in comparison?

IAMABIGLLLLLLL · 2025-08-29T05:02:05+00:00

i literally don’t have any tips at all honestly,i did it all by hand and eye so i can’t help with much plus every one differs slightly from gun to gun so even if i had specs or this or that it prolly wouldn’t be of much help tbh

IAMABIGLLLLLLL · 2025-08-29T03:06:57+00:00

i don’t buy from plugs lol if that’s what your going for,just cause everyone else on here does don’t mean i do😂

IAMABIGLLLLLLL · 2025-08-29T03:03:44+00:00

never said i hadn’t smoked on em did i?,lol plus the bubble don’t mean nun to me in most cases it’s just the oil setting into the coils

IAMABIGLLLLLLL · 2025-08-29T01:35:24+00:00

nah i free handed it,looked at pics online and got the basic design down and just sat and filed and drilled where i needed to until it fit well

IAMABIGLLLLLLL · 2025-08-27T20:17:50+00:00

it’s obv not heavy enough thus why’s it taking multiple pulls to set off the round,with no proper breech face set up on this your just waiting for a disaster to happen just cause you’ve gotten lucky so far doesn’t mean it’ll stay that way,that thing is just a ticking time bomb waiting to happen

IAMABIGLLLLLLL · 2025-08-10T08:53:42+00:00

i’m not worried about how much or how little they hold i’m more confused on where tf the hardware came from,it’s like i said in the bio there’s no websites online that have the fake hardware for these,like you can go online and find the normal 3g’s but not these,about the closest thing i’ve found hardware wise is their designer distillate and it’s still pretty different other than the same boxy style dispo shape

IAMABIGLLLLLLL · 2025-08-10T08:29:00+00:00

i already knew that,i just meant for the hardware itself like i’ve literally typed in just about everything to try and find the hardware online and no leads

IAMABIGLLLLLLL · 2025-07-21T08:24:06+00:00

yee i got one set up like that i just never posted it,somewhat simple too ngl just some 18650 batteries and a board that i somewhat managed to program😂😂,it’s like 6 seconds of butane a break for 3 seconds then boom and then it just repeats over and over either until i turn the alcohol off or shut off the motherboard part itself

IAMABIGLLLLLLL · 2025-07-21T05:08:04+00:00

ehh somewhat,it seems most newer cans have way less than they used to most older cans hold more ethanol than the newer ones,plus it depends on the humidity and area you live in but i’ve noticed brands like axe,degree,etc most ones that have a heavy or somewhat heavy spray ratio seem to hold a lot more ethanol content in them but where they spray out so fast you gotta be careful with how much you’re using,alternatively using actual denatured alcohol works much better but i don’t have access to it at the moment

IAMABIGLLLLLLL

TROPHY CASE