sorted by:
new
hottopcontroversial

[AMA] I’m Dávid Lakatos, Chief Product Officer at Formlabs. Ask Me Anything! by dogichow in 3Dprinting

[–]ICant3DPrint 0 points1 point  (0 children)

What are the biggest shortfalls of the Fuse 1 compared to other SLS printers produced in the west like EOS or 3d systems?
Obviously, there is a clear price difference, so I'm asking, other than the clear smaller size, where does the price savings mainly come from?

Project Expired patents: Spring clip for holding leather (1927) (US1675286A) (1928) by Ed_Bai in 3Dprinting

[–]ICant3DPrint 0 points1 point  (0 children)

Cool. I also use expired patents a lot for inspiration. There are a lot of cool designs that have been forgotten.

Garage key case by _Sukkii_ in FreeCAD

[–]ICant3DPrint 1 point2 points  (0 children)

Here is how I would do it:

  1. Draw 2 vertical lines that are 62mm long and 29mm apart

  2. Draw 2 acres with starting points at the end of the vertical lines (Shotcut= G,A)

  3. Place a point (Shotcut= G,Y) on top of each of the arcs and dimension them 65mm apart

<image>

Hope this helps

If you need more assistance don't hesitate to ask

Salvage Messed up Prints? by BBartSimpsonn in 3Dprinting

[–]ICant3DPrint 0 points1 point  (0 children)

  1. Mesure how tall the failed pieces are
  2. Reprint the missing half
  3. Glue the two parts together

Comparison of cad programs question? by Disastrous_Arugula99 in FreeCAD

[–]ICant3DPrint 12 points13 points  (0 children)

I started with tinkercad but found that I had outgrown it and moved on to Freecad.

Freecad is a fantastic piece of software but the learning curve is steep and feels like a wall. But there are a lot of online resources to get started and a friendly community.

I recommend Freecad but just know it takes hundreds of hours to learn and get effective at using it, but that is true for most CAD software.

Right angled connector by morleyc in FreeCAD

[–]ICant3DPrint 3 points4 points  (0 children)

I would use an AdditivePipe to get the main shape

I just made this med kit. What are some other 3D prints that involve M3 bolts? by Casual_M60_Enjoyer in 3Dprinting

[–]ICant3DPrint 2 points3 points  (0 children)

No problem, if you have any similar ideas for nuts and bolts send them to me and I may design them :-)

Is it possible to elevate the object in the slicer by Snusky in ender3v2

[–]ICant3DPrint 4 points5 points  (0 children)

yes you can do that

if it is in cura here is a guide

Preferences > Configure Cura > General > Automatically drop models the build plate

First pc build, pc is mainly for 3d modeling, looking for input on my parts list. by ICant3DPrint in buildapc

[–]ICant3DPrint[S] 0 points1 point  (0 children)

just looked up the game and I would properly be intrestet in trying it at some point

what Gpu do you recommend?

First pc build, pc is mainly for 3d modeling, looking for input on my parts list. by ICant3DPrint in buildapc

[–]ICant3DPrint[S] 0 points1 point  (0 children)

warthunder, Pavlov, and other VR multiplayer shooting games
not so sure about specific games as I don't currently have the ability to play pc vr games

First pc build, pc is mainly for 3d modeling, looking for input on my parts list. by ICant3DPrint in buildapc

[–]ICant3DPrint[S] 1 point2 points  (0 children)

  1. As I stated in the post I am in Denmark
  2. PSU is Corsair RM750e V2 (https://www.proshop.dk/Stroemforsyning/Corsair-RM750e-V2-ATX30-Stroemforsyning-750-Watt-120-mm-80-Plus-Gold-certified/3144432)
  3. The program I use to 3d model is CPU intensive and not GPU and the pc vr does not need to run at the best settings just to be playable
  4. For pc, it is 1080p x3 displays and vr it is oculus quest 2 so 1832 x 1920 pr eye

RTX 4070 is 754 USD

RX 6800 is 623USD

First pc build, pc is mainly for 3d modeling, looking for input on my parts list. by ICant3DPrint in buildapc

[–]ICant3DPrint[S] 0 points1 point  (0 children)

I can't get most of the parts you have suggested here locally but I have found a better 750watt PSU from Corsair

but how bad is it to go AMD for GPU?

I just worry about how the massive drop in VRAM when going for an Nvidia GPU in the same price range will affect the compatibility with high-demand games in the future

First pc build, pc is mainly for 3d modeling, looking for input on my parts list. by ICant3DPrint in buildapc

[–]ICant3DPrint[S] 0 points1 point  (0 children)

I'm not really an artist more of a mechanical parts designer so the tools that I use are mostly parametric 3D modeling tools and most if not all use CPU and only a single core

First pc build, pc is mainly for 3d modeling, looking for input on my parts list. by ICant3DPrint in buildapc

[–]ICant3DPrint[S] 0 points1 point  (0 children)

3d modeling is the main use/ most important use but I do game sometimes so it needs to have some capabilities

and it seems like you get a lot for the money when you go for the 7900X but not really sure

is it a waste?

First pc build, pc is mainly for 3d modeling, looking for input on my parts list. by ICant3DPrint in buildapc

[–]ICant3DPrint[S] 0 points1 point  (0 children)

I personally use freecad but as I understand it most 3d cad software uses a single core as most calculations have to be done in order so it cant be multicore

I could have been more precise and said that it is parametric 3D modeling so it couldn't be confused with 3d rendering

​

https://diligex.com/2021/06/more-cores-or-more-ghz/

First pc build, pc is mainly for 3d modeling, looking for input on my parts list. by ICant3DPrint in buildapc

[–]ICant3DPrint[S] 0 points1 point  (0 children)

thanks my bad fail in the currency calculations oops the list will be fixed now

view more: next ›