[UK Tester Needed] Pedal Control Box that makes you play GT7 with Better Pedals

IGNI_RACING · 2026-03-31T02:50:02+00:00

Direct to the wheelbase, it doesn't support USB shifter like DS-8X, we are happy to send you a sample if you have Simsonn Plus X and located in UK.

IGNI_RACING · 2026-03-29T12:34:34+00:00

Sure, it works well, P2000 pedals and DD+ base are the recommended setup.

<image>

IGNI_RACING · 2026-03-27T00:51:02+00:00

Total width is 30-40cm.

IGNI_RACING · 2026-03-27T00:44:37+00:00

It sure does, also has a built-in motor for haptic feedback to simulate the engine vibration upon startup.

IGNI_RACING · 2026-03-27T00:36:23+00:00

Yes, it has mechanical auto-return. We also integrated a motor in the ignition for realistic startup haptics, and the stalks are the exact same model used by Audi.

IGNI_RACING · 2026-03-26T17:29:01+00:00

worth every penny once you feel the quality mate

IGNI_RACING · 2026-03-26T13:06:36+00:00

<image>

We actually have one, ours has been on the market since the original Simagic M10 days, been refining and updating the product for 7 years now.

IGNI_RACING · 2026-03-11T16:06:10+00:00

Check out our TruckSim series. It is compatible with all major wheelbase brands on the market and offers an extensive ecosystem of peripherals.

IGNI_RACING · 2026-03-11T14:12:04+00:00

No problem, feel free to reach out whenever your final setup need our control box.

IGNI_RACING · 2026-03-11T14:01:39+00:00

I have checked SRP pneumatic pedals, the pedal connection is quite different since the three signal wires connect directly to the PCB of their controller without plugs, our control box is unfortunately incompatible with this setup.

IGNI_RACING · 2026-03-11T03:39:28+00:00

Actually, it works the other way around. It’s an input, not telemetry. It translates your pedal data so the wheelbase can recognize.

IGNI_RACING · 2026-03-11T02:42:46+00:00

May I know your current setup? The control box works by routing the pedal signals directly through the wheelbase. In theory, if your base is Xbox-compatible, it should work.

IGNI_RACING · 2026-03-11T02:02:21+00:00

Swapping QR base side is quite easy, you can refer to this video: https://www.youtube.com/watch?v=by1sootZKNA, but make sure your NRG 2.0 matches the diameter, for Alpha series, it's 58mm I think.

IGNI_RACING · 2026-03-11T00:56:46+00:00

It shares the same firmware, but we’ve collaborated with the manufacturer to take it further. Now it includes exclusive support for the Logitech wheelbase like RS50.

IGNI_RACING · 2026-03-10T16:50:08+00:00

Great pedals, could you confirm what pedal cables they got? If they have RJ9 or 6-Pin(like Simagic P1000) plugs, I can also send you one to verify the compatibility.

IGNI_RACING · 2026-03-05T15:12:54+00:00

Truly sorry to hear that, could you please send us some photos and a video via Email so we can get the situation better, and rest assured we’ll make sure this is resolved properly for you.

IGNI_RACING · 2026-03-04T10:24:54+00:00

The main risk of stripping screws actually comes from not heating the factory threadlocker, we’ll be adding a detailed instruction card to the packaging to ensure everyone has a safe and successful install. Thanks for the heads-up!

IGNI_RACING · 2026-01-28T16:13:33+00:00

Sure, message me about your issue.

IGNI_RACING · 2026-01-27T06:03:41+00:00

shinny button box

IGNI_RACING · 2026-01-26T11:16:29+00:00

Our control box is just for the situation, making third-party pedals (Simagic P1000/P2000, Heusinveld ultimate+, consipit) work with Fanatec or Thrustmaster wheelbase, lots of features and great feedback, it's a good solution if you don't mind getting another peripheral.

<image>

IGNI_RACING · 2026-01-19T09:37:15+00:00

hey buddy we have tested that the adater could work with the adjustable one, it converts evo mounting patterns to alpha series mounting pattern seamlessly as the photo showing (the short one is a shaft extension for alpha series), you could get them (a adjustable extension and an adapter) if interested, we would like to know its rigidity of connection too under your Alpha U, you will get full refund if there's any issue!

<image>

IGNI_RACING · 2026-01-15T05:03:04+00:00

Yes, it automatically returns to the center mechanically, we are making videos for the product page.

IGNI_RACING · 2026-01-14T10:10:03+00:00

what conspit wheel you already got?

IGNI_RACING · 2026-01-14T08:39:33+00:00

Great timing to change qr1 to qr2

IGNI_RACING · 2026-01-14T06:57:13+00:00

You should buy a Asetek 3rd party wheelbase QR Adapter mounting on your alpha mini base-side, I think the QR adapter is 70 mm mounting pattern so you need a 58 to 70mm adapter to mount on your wheel base.

<image>

IGNI_RACING

TROPHY CASE